Finally got some tires for the 1100+HP C6 z06. Lets get them mounted up and see how they do! More goodies to come for the Z06 this summer so stay tuned.
The internet world doesn't like real people! That's why he doesn't have alot of subscribers. If he was fake and a scamer and saying he's having a car give away, buy a ticket for $100 then they would subscribe. This is a good channel he's got
Lol, that first rip🤣🤣 it’s like the first time your fast car actually hooks, you can feel your soul getting pulled from your body to sit in the rear seats🤣🤣🤣 ( yes ppl I know there isn’t rear seats, it’s an expression 🤦🏼♂️ for anyone about to comment dumb shit ) car looks and sounds killer 🤜🏻🤛🏻🤘🏻🤘🏻 this is my favorite c6 hands down
Hell yeah awesome video. I know how feeling with all that traction, after 3 years with no traction I just put drag radials and S71 beadlocks on mine and I'm dead hooking now. I didn't even think it was possible!
bro that speeda clip is INSANE it looked like you had the car on jacks in the air and did the pull. I can't fathom what that acceleration feels like! You gotta be pulling close if not more than 1g of force
Anyone notice how his subscriber list has jumped? It seemed to be stuck at 1.9k for the longest time and now it's at 3.24k. I guess he's on the fast track now. No pun intended. 😉 I couldn't believe you mounted the tires by hand! FWIW, I think the bead locks really make the look if you will. 👍👍 could the bead locks be mounted on the front as well, just for the look? Save the Wave. 🙋♂
Started watching your channel when you got the V1 and mannnn gotta say love the content and your car collection. Definitely love the E55 AMG will be looking to see if you have videos of that. Keep up the good work
Bro I subscribed because of the f250 but I'm really loving the vette and it's twin turbocharged woooo bro you sir have got a very clean collection 👌 👏 👍 🙌
When l use to write articles for Nissan Sport Magazine l had to answer questions from readers. Some had experienced loss of power after putting on aftermarket wheels and tires. After consulting with Nissan engineers l found out if you varied the outside diameter of the front and rear tires relative to the stock ratios more than 3% the ECU started thinking there was wheel spin and cut full power to the engine. I never changed the diameter of tires on my C6 but recommend you consult with Chevy engineers if you can regarding this. I wouldn't trust people on forums unless they have direct access to the engineers that designed the C6. You know how it is, everyone thinks they are an expert on-line 🙄. Good luck. Your C6 is the same color combo as mine was.
To be honest in the past I’ve never really liked vettes. However I do own a 67 SS 327 Camaro black w/white belts so I’m not a Chevy hater I was actually brought up that way. I must say your build and the way you go about building your car has got me interested. If I were to one up the. Model you have is first followed close by the zr1. Awesome build keep up the good work videos included. Garage full of black beasts.
Check out streetspeed717, his zr1 us just insane. I've come to think vettes are peak vehicle for the price. Can't beat the sound, the speed, the reliability, and the looks for that price, and in a manual it easily competes with the crazy 10 speeds.
you have to drive the newer ( c-5 and c-6 LOL) to see how nice they are. I have been a fox mustang guy forever...and I still have a 10 sec street piece, ..i bought a c5.....BRAKES! HANDLING! i realllly like the c5. good time to buy...deals out there...
nice Job Chris. Surprised you mounted those rear tires.....good for you! put some heat in them, they will bite hard! thats one bad corvette....Killer! Ive got a 10 sec 85 mustang ......its crazy fast....your vette should be in the low 9s or 8 sec. Be careful. i got a c5 to cruise....I drove a c6 zo6 at cecil county...thats a great solid car.
Sick. I have an 850whp mustang 6spd, got MT ET R bid ply in rear and radial front runners. It’s still not hooking well. Going to try the radials now and see if that fixes it. I feel you on spinning all day lol.
Should have had 2 more inches of off set to the front to get same size lip as the black wheels look better imo.. because of the weld not being wide enough..💯💪
Love the set up brother…nice job!!! Quick question…what size were the rear tires before the Mickeys (street tires)? I’m planning on putting 345/25/20’s on 20x12.5’s and hoping they fit. Thanks!!!!
Every time I see this car I get reminded that it’s my obtainable dream car. But then I have to remind myself that I don’t need to spend 40-50k on a car that I’m just going to beat on right now 😭
This guy should have more subscribers with his videos being so 🔥
The internet world doesn't like real people! That's why he doesn't have alot of subscribers. If he was fake and a scamer and saying he's having a car give away, buy a ticket for $100 then they would subscribe. This is a good channel he's got
@@jeffkendel1570 this guy seems to know his shit.💪💪
@@cooterbrown7681 truth, as fucked up as it sounds it's the truth
People need to 👍. He has so many views but a fraction of likes and comments. That’s how RUclips gives exposure.
its the music 😆
Nice 😊
Lol, that first rip🤣🤣 it’s like the first time your fast car actually hooks, you can feel your soul getting pulled from your body to sit in the rear seats🤣🤣🤣 ( yes ppl I know there isn’t rear seats, it’s an expression 🤦🏼♂️ for anyone about to comment dumb shit ) car looks and sounds killer 🤜🏻🤛🏻🤘🏻🤘🏻 this is my favorite c6 hands down
The reaction from that first pull was perfect lmao
The reaction to that first 2/3 pull was classic. What a ripper
The reaction was CLASSIC! It’s a great feeling to enjoy your hard work.. I’m hooked bro…
The 2nd gear pull and then the smile says it all. Nice work.
Hell yeah awesome video. I know how feeling with all that traction, after 3 years with no traction I just put drag radials and S71 beadlocks on mine and I'm dead hooking now. I didn't even think it was possible!
Money! That's exciting man. I'm happy for you and glad it worked well with the new setup
Chris your channel is super underrated, good footage, info and cars. Keep em coming bud looking forward to more c6z content 🤙
Great videos brother and top quality I might add. Bad ass Vette and keep up the great work. Thank you
The smile tells everything, insane build 💪
love this channel!! His reaction priceless.
bro that speeda clip is INSANE it looked like you had the car on jacks in the air and did the pull. I can't fathom what that acceleration feels like! You gotta be pulling close if not more than 1g of force
I'm only jealous a lot!
A most excellent trick with the TPMS
Your attention to detail is incredible! Great video as usual. I would love to have you do some work on my car.
Anyone notice how his subscriber list has jumped? It seemed to be stuck at 1.9k for the longest time and now it's at 3.24k. I guess he's on the fast track now. No pun intended. 😉 I couldn't believe you mounted the tires by hand! FWIW, I think the bead locks really make the look if you will. 👍👍 could the bead locks be mounted on the front as well, just for the look? Save the Wave. 🙋♂
9.91k
Dang that is a bad azz Z06 no doubt!! Awesome cars and video
Just discovered this channel and I love it bro KEEP POSTING🔥
Same he’s good 🔥
Insane build man. Keep it up 💯
I could almost feel the rush on that pull..👍
Gotta love the peeled up 3lz dash. That was the first thing I replaced on mine.
F'n beast! 🔥🔥🔥Looks badass and sounds amazing! Btw, good music too. 👊🏿
Started watching your channel when you got the V1 and mannnn gotta say love the content and your car collection. Definitely love the E55 AMG will be looking to see if you have videos of that. Keep up the good work
Looks amazing!!
Never seen a better looking c6 🥵🔥🔥
Beautiful C6-Z my man !!!
That was my EXACT same reaction when I put them on my built Redeye lol. That was great bro!
Man she sounds sweet! Sound like an airplane shutting down at the ramp💯👍🏿
Bad ass car Chris!🤘
Enjoy watching your builds. The tpms bomb didn't work for my C6z06 after a fee miles of driving.
Bro I subscribed because of the f250 but I'm really loving the vette and it's twin turbocharged woooo bro you sir have got a very clean collection 👌 👏 👍 🙌
Legit great Videos Keep up the Great Work👏🏼👍
I love how you’re all calm and cool the first 3/4 of the video. Then you do that first pull with traction 😂
WOoOOOOoOooO!!!! 😆
Makes my C6 look pretty bad there Sir! Thanks for hurting my feelings, Again! 🤣 That's one bad azz C6 man!!! Keep up the good work....seriously.
Not a fan of the wheels that you had on before with the rivets but the drag pack is beautiful! That's my dream car!
Having good tires always makes you faster
Keep up the content man I also have 2 vettes. Learning from the veteran
All around dope!!!
Wicked car collection!!!
Damn those Welds are 🔥🔥🔥
I got the same setup for the rear of my C5Z 305/45R/17 MT street R’s ! 😎🤙🏼
Love your videos keep it up
I had to subscribe because his reactions are real reactions unlike some RUclipsrs trying to gas things up lol
Beautiful z06.
When l use to write articles for Nissan Sport Magazine l had to answer questions from readers. Some had experienced loss of power after putting on aftermarket wheels and tires. After consulting with Nissan engineers l found out if you varied the outside diameter of the front and rear tires relative to the stock ratios more than 3% the ECU started thinking there was wheel spin and cut full power to the engine.
I never changed the diameter of tires on my C6 but recommend you consult with Chevy engineers if you can regarding this. I wouldn't trust people on forums unless they have direct access to the engineers that designed the C6. You know how it is, everyone thinks they are an expert on-line 🙄.
Good luck. Your C6 is the same color combo as mine was.
Looks great 👍 I would have done that same set up
Underrated RUclipsr. Keep it up
Thanks man!
Liking that shirt GSXR all the way an LS
Nice choice of wheels 👌🏻 you know I’d rather see some road race slicks on there so maybe you need a third set!
Nice car 🔥
To be honest in the past I’ve never really liked vettes. However I do own a 67 SS 327 Camaro black w/white belts so I’m not a Chevy hater I was actually brought up that way. I must say your build and the way you go about building your car has got me interested. If I were to one up the. Model you have is first followed close by the zr1. Awesome build keep up the good work videos included. Garage full of black beasts.
Check out streetspeed717, his zr1 us just insane. I've come to think vettes are peak vehicle for the price. Can't beat the sound, the speed, the reliability, and the looks for that price, and in a manual it easily competes with the crazy 10 speeds.
you have to drive the newer ( c-5 and c-6 LOL) to see how nice they are.
I have been a fox mustang guy forever...and I still have a 10 sec street piece, ..i bought a c5.....BRAKES! HANDLING! i realllly like the c5.
good time to buy...deals out there...
Amazing car. 🇬🇧
RYE NH! I'm in Milton! Nice ride!
nice Job Chris.
Surprised you mounted those rear tires.....good for you!
put some heat in them, they will bite hard!
thats one bad corvette....Killer!
Ive got a 10 sec 85 mustang ......its crazy fast....your vette should be in the low 9s or 8 sec. Be careful.
i got a c5 to cruise....I drove a c6 zo6 at cecil county...thats a great solid car.
Clean ass car bro
Dude whole video was worth watching when i saw 19:27 😂😂🤙🏼🤙🏼
The e63 🔥
BRUH... this car is what wet dreams are made of lol... u have a beast of a car!!!
I hope to find that amount of traction on my ‘19 Z06 one day and have the same reaction
Fire asf
Im actually digging the channel. I also have a pretty sick collection very similar to yours including 1st gen camaro and c6z lol
Damn than Vette is super sick , I would love to get a run with my GTR
Sick. I have an 850whp mustang 6spd, got MT ET R bid ply in rear and radial front runners. It’s still not hooking well. Going to try the radials now and see if that fixes it. I feel you on spinning all day lol.
Get Viking shocks if you don’t already got em
Should have had 2 more inches of off set to the front to get same size lip as the black wheels look better imo.. because of the weld not being wide enough..💯💪
Love the set up brother…nice job!!! Quick question…what size were the rear tires before the Mickeys (street tires)? I’m planning on putting 345/25/20’s on 20x12.5’s and hoping they fit. Thanks!!!!
sick
lol that first pull
Dilf!🔥🔥
A daily in Arctic White ls3 C6 your car is absolutely f****** gorgeous !!?
Damn, did you win the lottery??
The blue calipers look sweet on the black. Did they come like that stock?
Dude you have to race streetspeed717’s c7. That would be insane
it looks scary af XD
I want that car man I love that vette you put together man you lucky 🍀you rock Chris (no)" homo"
Every time I see this car I get reminded that it’s my obtainable dream car. But then I have to remind myself that I don’t need to spend 40-50k on a car that I’m just going to beat on right now 😭
This guy is so handsome omg
You might want to raise the back a little if you get another person in there you'll rip your fender liners right out, happened to me on both sides.
What year is your vette, trying to decide on ZO6 or Zr1.... your car is FIRE
Corbette 👍😎🔥💯💪 😈🔥
Nice ride. The new zo6 has 345’s in back why didn’t you get at least 315’s
badass car, is there a specific name blue color on the brakes ?
U hit 80mph in 2nd gear?!?!? Car looks and sounds amazing
These cars do 60 mph in first and 90 in 2nd lol
@@alexn.7527 Thats impressive. Beautiful car
Clean vette what do u think of the 355 rear tires khumo makes ?? Lmk I need new new tires for my ZO6 not making as much as yours but around 960rwhp
Great videos Chris! What level tint did you use on your windshield?
35%
@@ChrisSullivan69 I’ll have to try that, 50 was too light in the past, was afraid 35 would be too dark. Is yours on stock suspension?
What kind of springs are you on my gawd😍😍😍😍😍
What is the offset and backspace for the 18x5 fronts ? also will this setup fit with stock big brake setup on z06 or grandsport ?
what rims were those before you put on the new welds?
I want to twin turbo a C7Z but I don’t see shops doing it unless it’s a drag car
Are you on stock suspension? I just ordered my ZR1 splitter and same spec drag pack this week lol. Hoping I don’t have to go to coils.
Yes stock suspension
how do you solve the traction control problem>? Does front and rear have same diameter?
Fkn send it! 🤣
I miss my vette damn
Man more c6 content please ;(
What tire pressure are you running the ET street r tires on the street
Is that “u coat it” epoxy on the garage floor?
I see a vette more important a c6 with welds I click
I'm a simple man
bro dis nigga beat Selection is krazy
What size tires are you running in the front ?
hi what model is the one you show at exactly 5:45 with the screws( so tihey seem) all around the rim again at 5:51. Thanks