Dear god, I JUST put this stack on my armattan chameleon. Haven't even flown it yet...like, literally still connecting receiver and vtx. 🤦🏻🤦🏻🤦🏻 I certainly don't rip like you, but I'm working my way there. I'll keep ya posted, thanks for the info!
Speedybee Bluetooth is hands down the most simple, easy to use tool out there. It works flawlessly Everytime for me. I build dozens of quads each month. Take a closer look, super useful in the field!
Wow this is a really interesting experience and I'm glad you shared it. I have flown with and crashed using this exact stack and did a video of it for my channel too. Waited a while actually before sitting down and getting everything done. But my build is a 4S one not 6S.
Your the man DAN Z Great video.. Been there done that before. Gotta know, only one this is true every day in FPV. Shit is gonna break, always sucks when you didnt get to do the breaking though.
Outstanding video my dude. Bro that’s wild how that esc were making those tones without the motors 🤯. Fook me I have those Velox esc with my Fettec G4 . Hope nothing happens. See ya Saturday if your going 🤘🏻🚀
The stack they sent me is still on my bench. Have had too much other stuff to test and work on but its officially up next. I will be recording my experience with it. Guess we will see. I have heard similar bad experience with the ESC.. 🤷 cant say for myself though.
Great video bro. I'm still rocking my se stack. Only issues I've had are the blackbox logging is not always recording when it should. Other than that smoked a motor due to that low rpm setting needing to be changed from adaptive to on. Been flying great over The last few months. But have seen a buddy go throught two esc's already.
Yeah. It’s a very hard thing to account for. I’ve had Two (non SE) t motor ESC’s go solid for a long time. BUT, with the SE. I had this experience. And a buddy had two of these ESC’s die on him. I don’t know how to accurately account for it. There is not enough there for me to say that this particular esc is bad. At the same time. I can’t say that I’d recommend this particular esc based off of what I’ve experienced and witnessed. T-motor is a reputable brand that isn’t known for making shoddy products.
Nah. I double checked before plugging in. Then I plugged in on 4s and did all of my motor configuration (which included spinning up motors in the motor wizard). And then after it popped I checked again that it was correct.
My Bluetooth works flawlessly. If you updated to 4.5 then it shuts off the uart to the correct port and the manual is wrong. The manual says uart 5 which is incorrect it's uart 6. Activate msp on uart 6 and your issues should be fixed. I am using android. Also on the esc low rpm protect needs to be moved from adaptive to just on or she might smoke some motors. Hope some of this helps
I had this stack and had problems with the esc as well it didnt burn out the fc well one did the first one the stack caught on fire i do think that was my fault because i didnt do a smoke test but the second one i popped a capacitor on the board after one crash
I've seen Limon (betaflight dev) do the sound w/no motors thing in one of his videos. He said you can only do it once, implying it would fry everything. I can try to dig up the video, but it'll be a bit of a crap shoot.
Interesting. I could not get mine to connect. And on t-motors site they have a disclaimer saying “currently only supports android”. Maybe it’s just me?
For my 5" Builds The Constants are Frame: Vannystyle Pro True-X Motors: VCI Titan 2306 @ 1850kv Props: Gemfan Proxy or 4937's VTX: DJI O3 The stack situation is a little more all over the place. ESC's : Two T-Motor Velox V50A's, T-Motor Velox 45a, Foxeer Reaper FC: Two Kiss Ultra Builds, Mamba F722 App Mk4, HGLRC Zeuss I've had pretty good experiences with everything listed above. Hope this is helpful.
Good to see reviews from people who can ACTUALLY FLY! Your insane!
actually fly AND edit video, that's some unicorn shit
😮 when you plugged in that esc and those tones come out😂 i knew i didnt see any motors connected...very interesting indeed🤔
Crazy esc tones, like finding a four leaf clover, never seen that either.
T-Motor's V45Amp and F7 HD are still my favorite combo, rock solid, lasts me a year of bashing the shit out of it 👌
The faces when you first heard that beep lmao.
Dude, nobody puts a video together like you do. Thanks for the review.
The Suspense..... Bing Bong!!
haha.. the look on your face...
true bewilderment... love it
gimmie some of that super kiss plus.
Nice chair, also great video… never have I ever heard tones thru the power lead lol 😂
GOAT of chairs.
You are nuts! also the production quality is top notch sir! as always.
Your production quality is amazing!
Dear god, I JUST put this stack on my armattan chameleon. Haven't even flown it yet...like, literally still connecting receiver and vtx. 🤦🏻🤦🏻🤦🏻 I certainly don't rip like you, but I'm working my way there. I'll keep ya posted, thanks for the info!
@@Joe_Fotoleo this is anecdotal. I had a bad experience. But, you may not. I hope it works for you for a very long time.
Hopefully you don't get esc tones through your battery plug lol still blows my mind that's probably a new one for all of us 😂
That is wild 😮 Thank you for this! And great flying as always
Good stuff DanZ! Great flying!
where you been all my life, subbed and liked looking forward to some more amazing flying vids and reviews
Great reviews as always❤
Loving the carwash shot😂
Production quality is on point!!
Speedybee Bluetooth is hands down the most simple, easy to use tool out there. It works flawlessly Everytime for me. I build dozens of quads each month. Take a closer look, super useful in the field!
The car wash clip 👌🏽
Wow this is a really interesting experience and I'm glad you shared it. I have flown with and crashed using this exact stack and did a video of it for my channel too. Waited a while actually before sitting down and getting everything done. But my build is a 4S one not 6S.
Your the man DAN Z Great video.. Been there done that before. Gotta know, only one this is true every day in FPV. Shit is gonna break, always sucks when you didnt get to do the breaking though.
I really like the FC but I run mine on their Pacer ESC. Never had an issue. Also, Speedy we has never worked for me either 🤷♂️ Great video homie! 🔥🔥🔥
Outstanding video my dude. Bro that’s wild how that esc were making those tones without the motors 🤯. Fook me I have those Velox esc with my Fettec G4 . Hope nothing happens. See ya Saturday if your going 🤘🏻🚀
I hope your experience will be better than mine!
@@DanZfpv Hope so too Dan . Thanks for always looking out my dude 🤘🏻
this video made me tingly
Great video dude, 🔥🔥🔥
This was a great video man
Man what a great video 👏👏🔥
TMotor have very good esc and fc, never hat a problem... fly 45A ESC on 6S with 2150kv.... and still works
Great video
The stack they sent me is still on my bench. Have had too much other stuff to test and work on but its officially up next. I will be recording my experience with it. Guess we will see.
I have heard similar bad experience with the ESC.. 🤷 cant say for myself though.
Great video bro. I'm still rocking my se stack. Only issues I've had are the blackbox logging is not always recording when it should. Other than that smoked a motor due to that low rpm setting needing to be changed from adaptive to on. Been flying great over The last few months. But have seen a buddy go throught two esc's already.
Yeah. It’s a very hard thing to account for. I’ve had Two (non SE) t motor ESC’s go solid for a long time. BUT, with the SE. I had this experience. And a buddy had two of these ESC’s die on him. I don’t know how to accurately account for it.
There is not enough there for me to say that this particular esc is bad. At the same time. I can’t say that I’d recommend this particular esc based off of what I’ve experienced and witnessed.
T-motor is a reputable brand that isn’t known for making shoddy products.
Speedybee 💥
Maybe the harness pinout on the replacement fc you mounted is different. Awesome review though Dan!
Nah. I double checked before plugging in. Then I plugged in on 4s and did all of my motor configuration (which included spinning up motors in the motor wizard). And then after it popped I checked again that it was correct.
@@DanZfpv oh got it. Btw, sick rip!🔥🔥🔥
My Bluetooth works flawlessly. If you updated to 4.5 then it shuts off the uart to the correct port and the manual is wrong. The manual says uart 5 which is incorrect it's uart 6. Activate msp on uart 6 and your issues should be fixed. I am using android. Also on the esc low rpm protect needs to be moved from adaptive to just on or she might smoke some motors. Hope some of this helps
Got my shirt from wrekd 💪
Yep I'm stick with speedybee 405 v3. You need a duel cap
I had this stack and had problems with the esc as well it didnt burn out the fc well one did the first one the stack caught on fire i do think that was my fault because i didnt do a smoke test but the second one i popped a capacitor on the board after one crash
Yup, I avoid their electronics.
Good video man I will not try that stack lol where did you get those hooks to hang your quads on the wall 👍👍👍👍
I designed/printed them myself for my diy pegboard.
I've seen Limon (betaflight dev) do the sound w/no motors thing in one of his videos.
He said you can only do it once, implying it would fry everything.
I can try to dig up the video, but it'll be a bit of a crap shoot.
Yup...somethings are learned the hard way I guess. lol
@@DanZfpv I looked for the video btw, couldn't find it.
@@hattrickFPV all good! Appreciate ya. Learn something new everyday.
Odd, I have an iphone,a speedy bee aio, and it works great.
Interesting. I could not get mine to connect. And on t-motors site they have a disclaimer saying “currently only supports android”. Maybe it’s just me?
Also what’s your setup for 5 inch? What battery and stack are you using? Ive gotta build myself a 5 inch
For my 5" Builds
The Constants are
Frame: Vannystyle Pro True-X
Motors: VCI Titan 2306 @ 1850kv
Props: Gemfan Proxy or 4937's
VTX: DJI O3
The stack situation is a little more all over the place.
ESC's : Two T-Motor Velox V50A's, T-Motor Velox 45a, Foxeer Reaper
FC: Two Kiss Ultra Builds, Mamba F722 App Mk4, HGLRC Zeuss
I've had pretty good experiences with everything listed above.
Hope this is helpful.
@@DanZfpv yeah thanks!
whats the build at the end?
That one is a prototype Vannystyle Lite running on an old Heli-Nation Talon F7 fusion stack.
wtf
Amazing and honest review! That's what I'm talking about! 🫡