Easy Install for Side Step Lights

Поделиться
HTML-код
  • Опубликовано: 29 сен 2024

Комментарии • 32

  • @605LIFE
    @605LIFE Год назад +2

    Those LEDs are rad!!

  • @mh-uk4vq
    @mh-uk4vq Месяц назад

    Too much moving you need to hold the camera steady Dude.

  • @tailai168
    @tailai168 Год назад

    Hi : I Bought a running boat For My 2019 Toyota Rav4
    blue wire I connect to Door light (domes Light )
    White wire I connect to fuel Box running signal
    Red wire I connect to Turn signal
    Black wire I connect to Ground
    But only work for turns single
    When I opened the door They don't have light come out
    Can you tell me what's wrong Thanks

    • @ordinary_arkansan
      @ordinary_arkansan  Год назад

      Hey, I'm sorry, I can't really help with this. I'm not familiar with the Toyotas.

  • @andrewhassell8982
    @andrewhassell8982 Год назад +1

    instructions unclear, I now have jelly all over my ceiling fan . . . .

  • @tieuhoc321
    @tieuhoc321 5 месяцев назад

    I have 2024 gmc sierra 1500 densli. Try hook up step light. I don’t know with wires to hook up? Did you know with bcm or elm? Please help

    • @ordinary_arkansan
      @ordinary_arkansan  5 месяцев назад

      Sorry. I'm sure the 2024 is different. I'm not sure what it would be on those. I'm sure you can find a diagram online.

  • @ludgerobarbosa8781
    @ludgerobarbosa8781 2 месяца назад

    Where did you get led strips

  • @shondunn
    @shondunn Год назад

    Hey I need some help
    I have a 2022 Gmc 1500 Denali. Brought some Led lights to add to my running board. I tied them into the door sill lights. Every time the lights come on they flicker and then come on. When they go off the flicker then off. What can I do to get full power to the running board lights. I know the dome lights has a dimmer on them.
    Thanks

    • @ordinary_arkansan
      @ordinary_arkansan  Год назад

      Did you go through the BCM like I did? Mine will sometimes flicker if my truck is off, but other than that they never flicker. What kind of LED lights are they? You may need to get some that don't require as much power, maybe?

  • @franciscotorres8667
    @franciscotorres8667 4 месяца назад

    Hi quick question. So the positive cable goes to the gray cable and negative to battery negative?? Thank you

  • @Joshua3131cc
    @Joshua3131cc Год назад

    Do the lights come on when you hit the lock and/or the unlock button on the key?

  • @raymtz4016
    @raymtz4016 Год назад

    How did you know what BCM and pin connector to go with? Do you have a diagram?

    • @ordinary_arkansan
      @ordinary_arkansan  Год назад

      There's a few links to diagrams in the comments.

    • @raymtz4016
      @raymtz4016 Год назад +1

      @@ordinary_arkansan Gotcha, yeah I found them in a previous video, not in this current one. Thanks

    • @brianperry3215
      @brianperry3215 6 месяцев назад

      Do you know if the articulating running boards are connected to the BCM by chance?

  • @markmanning5683
    @markmanning5683 Год назад

    Why would you leave wiring on the underneath of the truck? Maybe run the wires from inside the passenger compartment thru the grommets for each step area. Run all you wiring along in Wire channel inside the truck. Nothing to see that way.

    • @ordinary_arkansan
      @ordinary_arkansan  Год назад

      The way these lights are setup, there's no way there's enough wire to do that. Besides, if you get underneath my truck no wires are exposed or seen. I've ran them high and tight and inside conduit.

  • @jerryruiz26
    @jerryruiz26 Год назад

    Was this filmed with a potato?

  • @alberthornsby8486
    @alberthornsby8486 Год назад

    What lights are these?