I love Ruger firearms. I have a few guns by them already, and their customer service is awesome. You're right, an AR is an AR is an AR but to me the customer service and quality are the best. Don't mean to sound like an employee of theirs but I've never had any issues with them.
daniel oblinger I’ve heard this multiple times Daniel. I for one agree with you entirely. They’ve taken care of me every time I’ve needed assistance. It’s been just a couple, and both times admiringly my own fault, but they’ve held up their end of the bargain and more anytime I’ve reached out. Glad to hear it brother!
Seems like you got a pretty good deal on that Ruger. The 1 in 8 twist rate has nothing to do with 8 seconds as you said in the video, the 1 in 8 twist is one full revolution of the bullet for every 8 inches of barrel length.I really like my Ruger AR 556, seems to be a good rifle and it shoots well. The only thing I don't really like is that the bolt carrier has the an unshrouded firing pin, not that it has caused me any problems. Good looking rifle, I think you will enjoy it, thanks for the video.
I had to rewatch that part just to hear what you could have mistaken for “8 seconds”...but no, I most certainly said that. Lol ..I definitely meant inches. Thank you for pointing this out. I was fast talking and looking at the phone screen and totally didn’t hear myself. Lol For the record .. 1:8 = how many spins:how many inches of barrel it takes to do so
Yeah that was some funny schite there you can shoot your 566 and 223 and it will do so at 1 inch every 8 seconds lol I'm pretty sure those bullets are moving just a wee bit faster than that. Good stuff, good review.
@@wtfjoe3276 I'm here in the US but I may not have bought that brand of ammunition I suppose, lol aside from the blooper it was a good review I wouldn't worry nothing about the blooper reel it happens to all RUclipsrs because we're all human.
Carolina King absolutely seen my friend. This one has the full auto bcg as well..I just picked up another one this passed weekend , an older model with the front site integral gas block. It too has it. I’ve actually not seen that style for quite a while..odd, but Even the cheapy off brand ar’s I see locally have it. Mind you the rifles themselves wouldn’t stand up to more than a mag of a high firing rate, but as for the rugers, I’m a big fan myself. Thanks for dropping by man!
I have that exact same one!!! But I bought ruger flip up sights front and rear... I love Ruger!!! Great gun... too bad we haven’t had a zombie outbreak so I can use it...
Be sure to check your bolt carrier group on your new ruger ar556! I shot mine about 40 times and when i cleaned it i noticed metal flakes! Got to looking and the lip on the front part of my bolt carrier was flawed and it had been chewing the hell out of the upper! I bought a new nickel bolt carrier from palmetto and its working fine now but was not pleased with this Ruger! The reason i bought the Ruger to begin with is because its supposed to have the best bolt carrier group out of the cheaper ARs..... I wasn't going to send it back and wait 6months to get it fixed or replaced by ruger so my 700$ Ruger has now cost me 900$!
Actually, Ruger is really good with these kinds of problems. I called them about buying a part on my Ruger 22 handgun which recently broke. I bought the gun 32 years ago. They told me to send them the part and they would replace it. It took approximately a week to get it back. I was amazed at their service. Never expected them to replace a part on a gun I bought decades ago and shot 1000s of rounds through.
Maybe I got a lemon (new 556 MPR a few weeks ago) but my impression of the Ruger BCG is that it is poorly machined. A high quality BCG can be taken apart and reassembled without a f@#king hammer and a pry bar. I realize they can be a little stiff when new but this one is near impossible. No complaints with the gun though, using a bolt from another AR and the MPR runs like a charm.
@@MikeNaples the BCG in mine was definitely flawed so i had to replace it with a nickle BCG from palmetto armory, the rifle is working great now but I sure wasn't happy with having to buy a 200$ BCG from a different company. I will post a video on my page later showing the flaw in the BCG that I found and what it did to my rifle.
@@Mahasattva27 it wasn't that i was worried about dealing with Ruger it was more not wanting to wait an extended period of time for a replacement part being there is/was a global "pandemic" that had basically shut the world down. I bought my rifle about a week before the "pandemic" was mentioned on the news and I had it for a couple of months before i noticed the flaw while cleaning the rifle.
Had to search for about an hour to find one, and ordered it this morning. Definitely a popular model. It was marked up for sure, but everything is right now.
@@i_smack_rats757 Ammo seek sure is a godsend. I was running out of options until I stumbled across that website on google. Been stocking up since its almost not worth going to a range right now due to everything being bought up.
The Ruger is a great weapon enjoy it. Saying I don’t know to something you don’t know is respectable. Too many people out there think they know everything and they put out bad info bc of that.
The Ultimate Big Munchkin thanks a lot for that comment. It’s a nerve racking thing to speak on camera, or even worse be seen, atleast for me. Those things don’t hurt others though, bad information however, that can. I will always give you guys my honest understanding, and let you know when I sincerely do not know, but am sharing my opinion instead. On the flip side, if you guys hear me share anything that you know to be wrong, please, speak up, and Correct me. Thanks for being here you Big Munchkin!
Great video, the different shots of the rifle are very helpful. 2 questions: Is the model number 8529? What is the length of the gas system, carbine or mid-length? Thanks!
Get the RUGAR AR556 “Flat Top “ RECOMMENDED MODS: Magpul MOE SL Adj Stock Magpul MOE K2 Grip Polish Trigger ( easy to do, video on YT) Burris AR-332 optic (chase the combo comes with a small red dot that’s nice} Vickers Blue Force 2 point sling M lock Quick Detach mount and two QD sling mounts Watch tear down and build videos. Learn this rifle inside and out This will set you up a solid, versatile, and functional rifle that you know how work on.
Ray Sharpless congrats Ray! You’ll live the rig man. I don’t know what others you’re used to if any, but if you’re not spoiled with anything super high end, you’ll love your ruger. Congrats man!
Both my 5.56 caliber AR-15's are made by Ruger. Like you I have the 18 inch 556 MPR and the regular 16 inch AR-556. Only difference i see from you is my standard AR-556 has a carbine length gas system and had carbine length handguards as well as an A2 front sight post. Looks like you have a free float handguard similar to what's on the MPR. The front sight post does make it a little front heavy but for now i'll keep it. I put new handguards in and put a Vortex Spark II on top, as well as upgraded the trigger. The trigger on the MPR is excellent, the trigger on the standard is mehh, kind of heavy. The MPR is good to go, there's very little to upgrade on that gun besides getting an optic.
Bought mine like 3-4 years ago and wish mine came with that hand guard instead of that cheap plastic one and A2 front sight post. Going to mod that soon!
I bought mine a couple years ago, love the front sight post better than the low profile gas blocks. I did take off the handguards and put on a quad rail and changed the charging handle to an ambidextrous one
Dunno if anyone gives a damn but if you are bored like me atm then you can watch pretty much all the latest movies on Instaflixxer. I've been watching with my gf for the last few weeks xD
Know of a clever way to mount a QD sling attachment to the rear portion of the Handguard? I think this Handguard only has functional m-lok slots towards the front for QD attachments. Awesome review! Cannot wait to get mine.
Wayde Morgan yes, go to Amazon or your internet home page and type in “Mlok qd mount”. You can pick up an a attachment that ustilizes the mlok slots and leaves you with your qd point. Love those things. Thanks for the question!
@@wtfjoe3276 thanks man! Do you recommend any upgrades to this rifle, or keep it factory? I'm thinking about putting a magpul stock, pistol grip, and mbus front and rear sights in od green.
Wayde Morgan I think your upgrade plan is great, and while I like the magpul stock, I especially like the sopmod stock. But I run an Eotech 512 sometimes and it’s perfect for 3 entire sets of extra batteries..or you can keep fire starting stuff in it..matches..ammo. Etc. but I do like the magpul stuff you mentioned. It will work and feel great with a nice grip, maybe a lightweight handstop up front or a shortened vertical grip. Minimal case however, I believe everything we own should have a light, and a sling.
I don't like the green tip bullets. They don't fragment . That fragmentation is what makes the wound cavity. I shot deer/hogs with the green tip 223 and it just poked tiny holes.
Abie Gonzales right. they build them on the multi caliber lowers, or the 5.56 lower then chamber them in different calibers. Yours is a 350 legend is what you’re saying though? This particular one and the other one I have also are both 5.56 guns.
whatarethoose92 actually, I upgraded altogether. I sort of decided to move away from the platform after I got my Bushmaster ACR, however recently I ended up with a much higher end AR altogether. Think you’d like to see that instead?
@@wtfjoe3276 I have one so I just wanted to see everyone's setup for that specific rifle but I'm looking in to 556 ar pistols if you can show all of yours I'd definitely watch it....I'm no expert so I'm just trying to soak up as much info as possible
Can you spell the name of the gun store in Ohio? Did you say, Vanziss? Can't believe they're going for 700 there.. Those same guns here in AZ are 1250.00..
fireguy964 yep..the mpr trigger does indeed break cleaner , reset sooner , and I know by measuring the break that it’s lighter. Not enough for me to notice, but I’m sort of spoiled by geisselle triggers in other rifles that I shoot more often.
In comparison to 2019, yes. As of now, well you can still find some cheaper depending on where you look. Check some local gun stores. One with the metal handguard should go for $899. However, if you are concerned about not getting one before a potential ban, then you decide whether it's worth it.
I have the same one but having issues when I go to load and shoot the round seems to get stuck like its not ratcheting from the mag ,also have had a couple miss fires where the firing pin would hit but wouldn't go off any suggestions on the problem?
WOLF _GAMING1987 my guess is with the light strike by the firing pin is that it was the first round of the mag, is that true? I say that because typically that will happen only when your bolt carrier isn’t fully engaged to the front of your chamber. How does this happen you ask? Have you ever loaded your fresh mag into the rifle, grabbed the charging handle and pulled it back, then “rather” than letting it go while pulled all the way back you sort of gently let it slide forward while maintain control of that slow steady forward stroke? That causes this issue, then typically once you actually fire a round, the rest of the rounds shoot just fine, does this sound familiar? The mag issue not cycling I would guess it’s because it needs a bump to the bottom. That’s also one of those things that you need to be aggressive with especially with fully loaded magazines. When inserting the magazine hit it with the palm of your hand like you are slapping it up into the rifle. If this keeps happening when you are shooting then I would consider throwing marking that mag “training only” so that you can practice only with it and don’t use it as a self protection type item. Try loading 29 rounds in your magazine instead of 30. This is something I do to make it a little easier to get a good seat on the mag as well. I hope this helps. Feel free to let me know if none of this sounds relevant and I will figure out something else for you.
Wolf Gaming 1987 take the BCG out of the weapon strip it down and soak it in mineral spirits, or 90% rubbing alcohol use a stiff toothbrush to scrub all the part and q tips to swab the inside of the BCG after everything is clean dry the parts off and use compressed air or a hair dryer to ensure there's no moisture left behind, oil everything down with your chosen gun lube and reassemble the weapon, sometimes the shipping oil used by the manufacturer dries out and becomes caked inside the BCG similar to Cosmoline used to preserve military surplus weapons causing the issues you mentioned hope this helps.
Joe you’re correct. This rifle was however the 8514 mpr, with the chrome “lined” barrel. The thing that threw a few viewers and myself off when I was talking about it is that the rifle previously had the upgraded stock as seen on a factory mpr on it while in this video one of the mil spec type stocks like what is found on the ruger 8500 models was what was on it. The factory mpr flash suppressor was also swapped out for the more standard bird cage type one that again was on this rifle at the time. A couple of small details that would’ve been noteworthy when I spoke about this and likely confused a few people who look at it as though it came in this exact form. Also, while rugers “elite 452” trigger comes factory in the mpr line, I haven’t found it to be night and day better than the rest of the single stage triggers offered in the rest of their line. Have you? Anyways, Thanks for the question and input, I definitely appreciate any information that helps me pass along more accurate reviews or tips to fellow 2a folks.
@@wtfjoe3276 That is actually a model 8529. It has the standard single stage 7.5 to 8.5 lb milspec trigger. It has the 16 inch barrel. I have the 8529 and the 8514 MPR 18 inch barrel. Yes the Elite 452 trigger is fantastic at 4.0 to 4.5 lb trigger. Both are great guns but the Elite 452 trigger will spoil you the first time you shoot it. But I prefer the 16 inch barrel of the 8529. So if I put an elite 452 trigger in my 8529 it will be my gun of choice. The Model 8542 is just like the 8529 but comes with the 452 trigger, 16 barrel and a longer hand guard and longer gas system.
D Togo affordability. They do depending on the model you purchase. Step up a model or two and you’ll get a full length handguard, the upgraded stock, their 2 stage trigger etc
@@wtfjoe3276 Awesome, I appreciate the response. Just got it the other day and am sort of new to the AR game. I think a 15" handguard would look a lot better than the 11". Just wanted to check before I ordered a new one. Any suggestions on a different handguard and how are you liking the rifle?
Mine had the standard slim handguard in 2015 but what feels like a better than standatd trigger. I'd only be no gauge guessing at #5.5. I like the look of the free float handgaurd, okay, a lot better. The mpr has a midlength gas system which I desire to have So, I guess I'll just have to get 2 more. Done and done Thanks for sharing your excellent looking; Cure for Stupid in Public pill launcher. Research MudFloods Cheers
Move your rear sight back as far as it will go to increase your site radius and accuracy, plus you’ll get faster target acquisition.
35-77 grains with a 1:8 twist, which I one rotation every 8 inches not per second
I have a 1/7 twist what grains ? works great shooting out of my colt M4 556….wade
I love Ruger firearms. I have a few guns by them already, and their customer service is awesome. You're right, an AR is an AR is an AR but to me the customer service and quality are the best. Don't mean to sound like an employee of theirs but I've never had any issues with them.
daniel oblinger I’ve heard this multiple times Daniel. I for one agree with you entirely. They’ve taken care of me every time I’ve needed assistance. It’s been just a couple, and both times admiringly my own fault, but they’ve held up their end of the bargain and more anytime I’ve reached out. Glad to hear it brother!
The forward assist is for people who use the firearm for it’s designed purpose. Sustained and extensive use in non-permissive environments.
The forward assist is for the piece of sxxt m16s we used in Vietnam. Ya could get it into battery when the chamber was full of rust..
Seems like you got a pretty good deal on that Ruger. The 1 in 8 twist rate has nothing to do with 8 seconds as you said in the video, the 1 in 8 twist is one full revolution of the bullet for every 8 inches of barrel length.I really like my Ruger AR 556, seems to be a good rifle and it shoots well. The only thing I don't really like is that the bolt carrier has the an unshrouded firing pin, not that it has caused me any problems. Good looking rifle, I think you will enjoy it, thanks for the video.
I had to rewatch that part just to hear what you could have mistaken for “8 seconds”...but no, I most certainly said that. Lol ..I definitely meant inches. Thank you for pointing this out. I was fast talking and looking at the phone screen and totally didn’t hear myself. Lol
For the record .. 1:8 = how many spins:how many inches of barrel it takes to do so
Yeah that was some funny schite there you can shoot your 566 and 223 and it will do so at 1 inch every 8 seconds lol I'm pretty sure those bullets are moving just a wee bit faster than that. Good stuff, good review.
Notcha Grandpa here in the US, our bullets are just as slow as us. Lmao
@@wtfjoe3276 I'm here in the US but I may not have bought that brand of ammunition I suppose, lol aside from the blooper it was a good review I wouldn't worry nothing about the blooper reel it happens to all RUclipsrs because we're all human.
Carolina King absolutely seen my friend. This one has the full auto bcg as well..I just picked up another one this passed weekend , an older model with the front site integral gas block. It too has it. I’ve actually not seen that style for quite a while..odd, but Even the cheapy off brand ar’s I see locally have it. Mind you the rifles themselves wouldn’t stand up to more than a mag of a high firing rate, but as for the rugers, I’m a big fan myself. Thanks for dropping by man!
I really like it. I like an AR very simple. Iron sights, a sling and a light.
My kids just surprised me with this one;it’s my first
Good kids
I have that exact same one!!! But I bought ruger flip up sights front and rear... I love Ruger!!! Great gun... too bad we haven’t had a zombie outbreak so I can use it...
what is the length from the floating hand guard to the threads if you were to take off the muzzle break???
i'm hoping is around 5.5 inches
Just ordered one model 8529# can't wait to get it home. 739.99.
Be sure to check your bolt carrier group on your new ruger ar556! I shot mine about 40 times and when i cleaned it i noticed metal flakes! Got to looking and the lip on the front part of my bolt carrier was flawed and it had been chewing the hell out of the upper! I bought a new nickel bolt carrier from palmetto and its working fine now but was not pleased with this Ruger! The reason i bought the Ruger to begin with is because its supposed to have the best bolt carrier group out of the cheaper ARs..... I wasn't going to send it back and wait 6months to get it fixed or replaced by ruger so my 700$ Ruger has now cost me 900$!
Actually, Ruger is really good with these kinds of problems. I called them about buying a part on my Ruger 22 handgun which recently broke. I bought the gun 32 years ago. They told me to send them the part and they would replace it. It took approximately a week to get it back. I was amazed at their service. Never expected them to replace a part on a gun I bought decades ago and shot 1000s of rounds through.
Maybe I got a lemon (new 556 MPR a few weeks ago) but my impression of the Ruger BCG is that it is poorly machined. A high quality BCG can be taken apart and reassembled without a f@#king hammer and a pry bar. I realize they can be a little stiff when new but this one is near impossible. No complaints with the gun though, using a bolt from another AR and the MPR runs like a charm.
@@MikeNaples the BCG in mine was definitely flawed so i had to replace it with a nickle BCG from palmetto armory, the rifle is working great now but I sure wasn't happy with having to buy a 200$ BCG from a different company. I will post a video on my page later showing the flaw in the BCG that I found and what it did to my rifle.
@@Mahasattva27 it wasn't that i was worried about dealing with Ruger it was more not wanting to wait an extended period of time for a replacement part being there is/was a global "pandemic" that had basically shut the world down. I bought my rifle about a week before the "pandemic" was mentioned on the news and I had it for a couple of months before i noticed the flaw while cleaning the rifle.
Had to search for about an hour to find one, and ordered it this morning. Definitely a popular model. It was marked up for sure, but everything is right now.
Also with the ammo prices spiking here recently. You can run your steel case just fine. This gun is not finicky when it comes to cheap shit.
@@i_smack_rats757 I was lucky enough to find a 420 round can of Federal at the shop I bought my gun. It came out to approximately 60 cents a round
@@metalhead9142 jeez. That's still a lot. Check out the app ammoseek or the website. It's a god send dude
@@i_smack_rats757 Ammo seek sure is a godsend. I was running out of options until I stumbled across that website on google. Been stocking up since its almost not worth going to a range right now due to everything being bought up.
I_Smack_Rats thanks for the advice! Never heard of em but just downloaded 🤙🏽
The Ruger is a great weapon enjoy it. Saying I don’t know to something you don’t know is respectable. Too many people out there think they know everything and they put out bad info bc of that.
The Ultimate Big Munchkin thanks a lot for that comment. It’s a nerve racking thing to speak on camera, or even worse be seen, atleast for me. Those things don’t hurt others though, bad information however, that can. I will always give you guys my honest understanding, and let you know when I sincerely do not know, but am sharing my opinion instead.
On the flip side, if you guys hear me share anything that you know to be wrong, please, speak up, and Correct me. Thanks for being here you Big Munchkin!
WTF…JOE 😆 cool RUclips name.
I got my lady that same exact ruger AR in this video review. Bad ass weapon 💥 ☮️ wtfjoe
Great video, the different shots of the rifle are very helpful. 2 questions: Is the model number 8529? What is the length of the gas system, carbine or mid-length? Thanks!
jeff 8514, and rifle length!
Great video Joe, nice gun for the price, I'm iooking to buy an AR 15 but not sure on Ruger yet.
Should be 35 to 77 grain. Youd be ok in that range i'm sure. Nice gun i think I'm going to buy one....if i can find one
“Grab a gun” in coppell tx. Has them ) for now!..)
Larry
Get the RUGAR AR556 “Flat Top “
RECOMMENDED MODS:
Magpul MOE SL Adj Stock
Magpul MOE K2 Grip
Polish Trigger ( easy to do, video on YT)
Burris AR-332 optic (chase the combo comes with a small red dot that’s nice}
Vickers Blue Force 2 point sling
M lock Quick Detach mount and two QD sling mounts
Watch tear down and build videos. Learn this rifle inside and out
This will set you up a solid, versatile, and functional rifle that you know how work on.
35 to 77 grain with 1:8" twist
Does this mean you can only put 1:8” twist barrels on it?
Got mine for $470 during the BETO firesale! Lmao no issues with the rifle.
@Gray Au sportsman's outdoor superstore last fall
Rear sight police: pullover to the up most REAR of your receiver please sir, makes you and all of us much safer if you can hit what your aiming at.
It’s the higher grains that you need that twist for....
Just bought this a few days ago. Haven't had a chance to take it to the range. Hope too soon.
Ray Sharpless congrats Ray! You’ll live the rig man. I don’t know what others you’re used to if any, but if you’re not spoiled with anything super high end, you’ll love your ruger. Congrats man!
i lost mine in a boating accident, along with my S and W MP15 223. I favore the Ruger!
Just bought the same rifle today, but nowhere to find the ammo:(
Gotta pay an arm and a leg online.
Both my 5.56 caliber AR-15's are made by Ruger. Like you I have the 18 inch 556 MPR and the regular 16 inch AR-556. Only difference i see from you is my standard AR-556 has a carbine length gas system and had carbine length handguards as well as an A2 front sight post. Looks like you have a free float handguard similar to what's on the MPR. The front sight post does make it a little front heavy but for now i'll keep it. I put new handguards in and put a Vortex Spark II on top, as well as upgraded the trigger. The trigger on the MPR is excellent, the trigger on the standard is mehh, kind of heavy. The MPR is good to go, there's very little to upgrade on that gun besides getting an optic.
Bought mine like 3-4 years ago and wish mine came with that hand guard instead of that cheap plastic one and A2 front sight post. Going to mod that soon!
I bought mine a couple years ago, love the front sight post better than the low profile gas blocks. I did take off the handguards and put on a quad rail and changed the charging handle to an ambidextrous one
Dang, I got this exact model last year in October for 450 shipped.
rona is a bitch
Damn! Thought I got a killer deal at 560$ Then again my buddy bought his a year before mine when they first came out at like 700$
Dunno if anyone gives a damn but if you are bored like me atm then you can watch pretty much all the latest movies on Instaflixxer. I've been watching with my gf for the last few weeks xD
@Jude Dash Yea, have been watching on instaflixxer for years myself =)
1 twist in 8 inches of barrel length
Tommy Penny I already got roasted for that slip up lol but nice catch! Can’t believe I said that. Funny though!
I had to use my forward assist on the range all the time especially hot days with a decent amount of rounds
Know of a clever way to mount a QD sling attachment to the rear portion of the Handguard? I think this Handguard only has functional m-lok slots towards the front for QD attachments. Awesome review! Cannot wait to get mine.
Wayde Morgan yes, go to Amazon or your internet home page and type in “Mlok qd mount”. You can pick up an a attachment that ustilizes the mlok slots and leaves you with your qd point. Love those things. Thanks for the question!
@@wtfjoe3276 thanks man! Do you recommend any upgrades to this rifle, or keep it factory? I'm thinking about putting a magpul stock, pistol grip, and mbus front and rear sights in od green.
Wayde Morgan I think your upgrade plan is great, and while I like the magpul stock,
I especially like the sopmod stock. But I run an Eotech 512 sometimes and it’s perfect for 3 entire sets of extra batteries..or you can keep fire starting stuff in it..matches..ammo. Etc. but I do like the magpul stuff you mentioned. It will work and feel great with a nice grip, maybe a lightweight handstop up front or a shortened vertical grip. Minimal case however, I believe everything we own should have a light, and a sling.
1 in 8 twist means the bullet twist 1 time in 8 inches of barrel not 8 seconds lol also should shoot 68 69 75 77 gr ammo best will do ok with 55 62
I don't like the green tip bullets. They don't fragment . That fragmentation is what makes the wound cavity. I shot deer/hogs with the green tip 223 and it just poked tiny holes.
how about a tripod to keep that damn cam still
Man I paid $815 ( full price) for this rifle.
was it worth it? looking at the same price right now..should i..pull the trigger?
Pretty much what I paid for mine 5 weeks ago. Keep in mind prices are up right now with all the demand.
Paid $849 with tax from Grabagun a week ago, ammo is the bitch thing to find right now
@@GlockRevolver paid 500 for 1000 rds of 556 thru cheaperthandirt... just ordered tuesday 3 days ago
@@alrueda86 yeah it's definitely worth it bro, I've had for over a year now and i absolutely love it.
I prefer the three prong over the birdcage for mine.
1:8 will stabilize 77 gr
Just bought today think I'm in love.
curious what you paid in what state?
@@uplatejay 749.00 bare gun! red dot scope under 200
@@uplatejay vt 750.00
Was the handguard added to this model after purchase? Because I thought it came with the standard style handguard?
what is the model number of this gun? It looks like the 29.
I would like to know to. This looks like what I want
Nice just picked one up today
Are you gonna take it to the range, would really appreciate if you do 👍
Hey there good sir 👋 does it come with a milspec trigger guard and is the barrel threaded? Thanks man.
what is the length from the floating hand guard to the threads if you were to take off the muzzle break???
Can you take the stock off? I just ordered one it gets here Wednesday
Ruger makes specific rounds for this AR. 350 legend it is 150 grain
Abie Gonzales for the 350 legends yes. This one is just the 556 form
@@wtfjoe3276 the AR is a Ruger 5.56 on the dust cover it says 350 legend
Abie Gonzales right. they build them on the multi caliber lowers, or the 5.56 lower then chamber them in different calibers. Yours is a 350 legend is what you’re saying though? This particular one and the other one I have also are both 5.56 guns.
Just bought one from a friend for 600 bucks . Think it was a good deal . Compared to 1000$ brand new
Bama Made it was marked up . Brand new online is 1000$ bucks rn
Mine was 600 brand new in 2016. Crazy that prices hike.
What? $1000 ruger 556 MPR? Damn folks are upping the price quiet a bit since I paid $579 for mine brand new. Great rifle, just not worth $1000.
Good vid. I love my Ruger AR556.
You and I both @sig 671 ! I’m becoming a fan so much so that as soon as I get rid of one a new one will find its way to me.
Same here, my father, brother, and I all have this rifle.
Any upgrades done yet? You should post a video if so 👍
whatarethoose92 actually, I upgraded altogether. I sort of decided to move away from the platform after I got my Bushmaster ACR, however recently I ended up with a much higher end AR altogether. Think you’d like to see that instead?
@@wtfjoe3276 I have one so I just wanted to see everyone's setup for that specific rifle but I'm looking in to 556 ar pistols if you can show all of yours I'd definitely watch it....I'm no expert so I'm just trying to soak up as much info as possible
Just stopped by to say IDK
Ah, another pry bar review. I love it. 💙😘
Does anyone know what the screw hole is on the underside middle area of the hand guard in the free-float ones? Sling attachment mounting hole?!
What is name of the hand garud is it its not ruger is it i have a 556 ruger my hand guard is different
Rate of twist does not involve seconds.
What's the gas tube length?
Can you spell the name of the gun store in Ohio? Did you say, Vanziss? Can't believe they're going for 700 there.. Those same guns here in AZ are 1250.00..
I bought mine at Bass Pro and they threw in a box of 150 rounds for just under $1000 total.
Love my RUGER AR-15
Steven Hall Adda boy!
Now that you’ve fired the AR556 and AR556 MPR, do you notice a distinct difference in the triggers?
fireguy964 yep..the mpr trigger does indeed break cleaner , reset sooner , and I know by measuring the break that it’s lighter. Not enough for me to notice, but I’m sort of spoiled by geisselle triggers in other rifles that I shoot more often.
What’s the trigger pull weight on this? Any know for fact? Thanks
Nice just shot mines today ..good times 😎😎
August 2021... big box "sportsmans warehouse" $818.00
@3:31 yeah, it saved Kyle Rittenhouse
I love my!
Radial muzzle brake on mpr
I don't get it my Ruger came with regular Ruger handguards you got Magpul
He has the free-float model, that's why.
@@shotta809 just asking
Cause I don't wanna sounds stupid lol
What is a free float barrel and what makes it better
@@christoferburgos9889 It has more room for customization, but it's not better or worse, just different.
@@shotta809 ok thank you
I just bought the free float model 😁🔥💯
AR15s are sold out everywhere. But I found this one for $950. Is that too much?
In comparison to 2019, yes. As of now, well you can still find some cheaper depending on where you look. Check some local gun stores. One with the metal handguard should go for $899.
However, if you are concerned about not getting one before a potential ban, then you decide whether it's worth it.
Behind enemy lines in California.... 1050.00 in 2021
Much sad for you :(
And anyone have recommendations for sling mounts on free-float models?
Can I attach an m-lok magpul foregrip directly to this or do I need something else? I have the free floating handguard model too
You can go directly to it yes, no problem
@@wtfjoe3276 thanks for the reply man!
I have the same one but having issues when I go to load and shoot the round seems to get stuck like its not ratcheting from the mag ,also have had a couple miss fires where the firing pin would hit but wouldn't go off any suggestions on the problem?
WOLF _GAMING1987 my guess is with the light strike by the firing pin is that it was the first round of the mag, is that true? I say that because typically that will happen only when your bolt carrier isn’t fully engaged to the front of your chamber. How does this happen you ask? Have you ever loaded your fresh mag into the rifle, grabbed the charging handle and pulled it back, then “rather” than letting it go while pulled all the way back you sort of gently let it slide forward while maintain control of that slow steady forward stroke? That causes this issue, then typically once you actually fire a round, the rest of the rounds shoot just fine, does this sound familiar? The mag issue not cycling I would guess it’s because it needs a bump to the bottom. That’s also one of those things that you need to be aggressive with especially with fully loaded magazines. When inserting the magazine hit it with the palm of your hand like you are slapping it up into the rifle. If this keeps happening when you are shooting then I would consider throwing marking that mag “training only” so that you can practice only with it and don’t use it as a self protection type item. Try loading 29 rounds in your magazine instead of 30. This is something I do to make it a little easier to get a good seat on the mag as well. I hope this helps. Feel free to let me know if none of this sounds relevant and I will figure out something else for you.
Wolf Gaming 1987 take the BCG out of the weapon strip it down and soak it in mineral spirits, or 90% rubbing alcohol use a stiff toothbrush to scrub all the part and q tips to swab the inside of the BCG after everything is clean dry the parts off and use compressed air or a hair dryer to ensure there's no moisture left behind, oil everything down with your chosen gun lube and reassemble the weapon, sometimes the shipping oil used by the manufacturer dries out and becomes caked inside the BCG similar to Cosmoline used to preserve military surplus weapons causing the issues you mentioned hope this helps.
35 to 75 grain
That's not a model 8514 as you said because 8514 is the MPR with 18'' chrome moly barrel and 452 trigger. So what model is it?
Joe you’re correct. This rifle was however the 8514 mpr, with the chrome “lined” barrel. The thing that threw a few viewers and myself off when I was talking about it is that the rifle previously had the upgraded stock as seen on a factory mpr on it while in this video one of the mil spec type stocks like what is found on the ruger 8500 models was what was on it. The factory mpr flash suppressor was also swapped out for the more standard bird cage type one that again was on this rifle at the time. A couple of small details that would’ve been noteworthy when I spoke about this and likely confused a few people who look at it as though it came in this exact form. Also, while rugers “elite 452” trigger comes factory in the mpr line, I haven’t found it to be night and day better than the rest of the single stage triggers offered in the rest of their line. Have you? Anyways, Thanks for the question and input, I definitely appreciate any information that helps me pass along more accurate reviews or tips to fellow 2a folks.
@@wtfjoe3276 That is actually a model 8529. It has the standard single stage 7.5 to 8.5 lb milspec trigger. It has the 16 inch barrel. I have the 8529 and the 8514 MPR 18 inch barrel. Yes the Elite 452 trigger is fantastic at 4.0 to 4.5 lb trigger. Both are great guns but the Elite 452 trigger will spoil you the first time you shoot it. But I prefer the 16 inch barrel of the 8529. So if I put an elite 452 trigger in my 8529 it will be my gun of choice. The Model 8542 is just like the 8529 but comes with the 452 trigger, 16 barrel and a longer hand guard and longer gas system.
35 to 77 grains
That’s not the actual River 556 8500
Why didn't Ruger chrome line the barrel?
D Togo affordability. They do depending on the model you purchase. Step up a model or two and you’ll get a full length handguard, the upgraded stock, their 2 stage trigger etc
@@wtfjoe3276 I've just got the exact same 556 your reviewing; do you have any complaints at this point?
hey its 35to77 grain
Im getting mine here in az for 500.
Used or new? I want one for that price!
Marilyn Mattoon its used lol but still a good price. He only used it once
Where?
Hi from New Lexington Oh
Dale Eveland very cool. Hello brother! I’ve got family around Mansfield. That’s in the general ballpark yeah?
Good info, but man you're killing me with the camera... stopped watching after a few mins.
Thanks for the review!! Very good!
Hanszell Mortley thanks a lot! I picked up another ruger ar this past weekend and look forward to bringing that to you all soon!
Yeah! Your the only one I see who
Reviewed the 8529
Gas system length
Carbine
Does anyone know if this has a low profile gas block from the factory?
AcS it does
@@wtfjoe3276 Awesome, I appreciate the response. Just got it the other day and am sort of new to the AR game. I think a 15" handguard would look a lot better than the 11". Just wanted to check before I ordered a new one. Any suggestions on a different handguard and how are you liking the rifle?
Just an idea, but put the camera on a tripod or something. You’re making me sea sick!
Larry Wilson noted!
1 inch every 8 seconds haha
of course thats what that means lol
It also handles 62 gram magazine clips with that 1 in 8 second twist.
1 inch every 8 seconds??
One rotation for every 8 inches of barrel
Your voice sounds way different than your face
ITZ ME I get it..huge let down either way. 🤦🏻♂️
@@wtfjoe3276 nah bro I was expecting like a white little voice but you actually sounded like a man
Mine had the standard slim handguard in 2015 but what feels like a better than standatd trigger. I'd only be no gauge guessing at #5.5.
I like the look of the free float handgaurd, okay, a lot better.
The mpr has a midlength gas system which I desire to have
So, I guess I'll just have to get 2 more. Done and done
Thanks for sharing your excellent looking;
Cure for Stupid in Public pill launcher.
Research MudFloods
Cheers