Correction, RPM figures given such as at 8:07 are RPS (revolutions per second). For essentially about 200 RPM vs 160 RPM. We're used to counting frames for RPM on tools in the thousands of rippems in high speed footage!
I was just about to comment and ask. I’ve watched all your ratchet videos and have been confused and bewildered on all of them because of this. But now I know - thank you TTC.
I wonder how the original brushed milwaukee will compare to the other milwaukees. Im sure its not as fast as the high speed, but torque wise. I have the highspeed n im not a big fan because its so damn weak. I know its not meant to break fasteners free, but as you noticed as well, any resistance and its damn near useless. Living in boston, all the rust i see makes it, well...damn near useless lol. Its not bad for installing fastners as long as you have clean threads.
Heads up, Kobalt made a new cordless ratchet. The ones that you guys tested are unavailable now. They have an extended reach version and a normal length version, I'd like to see it tested if you guys dont mind.
The DeWalt results just further support my opinion that between the red M12 line and the yellow Xtreme line, most advanced DIYer's and professionals that only need light-to-medium duty tools could do most tasks with just 12v stuff. Great tests!
As a mechanic, I can do about 80-90% of my work with an m12 stubby, ratchet, and driver. It's only with truck lug nuts and axle nuts that I use the shop high torque on. Can't wait for milwaukee to update their stuff honestly.
@@nateTrh my 12V Extreme DCF901 impact wrench can take the lug nuts off my Silverado torqued to spec @ 150lb-ft. I have the M18 mid-torque for the hard stuff, but I haven't needed it yet.
With all the 20v Dewalt batteries I have, it's not worth switching to the 12v version with slightly better results. As you stated at the end, just looking for tools that support my battery line.
For me personally, this category of tools is less about torque and more about size. These power tools are competing against hand rachets. I think even rpm speed means less then size. I bought one of these and never used it until I got the milwaukee with the compact battery. Now I use it everyday because it can fit into 90% of the areas my hand rachet does.
THANK YOU TTC FOR YOUR TIME TO SHOW US PEOPLE WHAT IS WHAT.. I honestly bet RUclips takes a good chunk of your life and I personally wanted to say thank you because some of us are not smart enough or rich enough to buy multiple things to figure out which is the cats meow.. You and project farm got my heart
I went ahead and bought one of the DeWalt 12v ratchets when they first hit the shelves at my local Lowe's. I figured that the smaller battery footprint would be better in the hand than the 2-ah 20v batteries I have for my compact drill and impact driver. I also don't mind having the 12v cordless screwdriver I bought as well, as that seemed to be the cheapest way to get 2 12v batteries and a charger. It's nice to know that I don't have to feel regret about not waiting for the 20v ratchet.
I know this is an older video, but I'd love to see an update to include the Makita ratchet in the mix. It's speed is almost double Milwaukee with the same torque. As well as having interchangeable 1/4" and 3/8" heads.
Downside to the 12v is I already have a 20v Dewalt system (slowly migrating from Black and Decker 20v), while I find an impact driver great overall, a ratchet seems better suited for automotive tighter space use.
That's the entire point of the Atomic line up. Basically give you the 12v line size but you can continue to use your 20v batteries. Dewalt was getting slammed a few years ago because they have a very large product line using a lot of different batteries. They have been simplifying and overhauling their product line ever since.
I don't care how long you have been wrenching but you aren't going to out pace one of these. Now if you have a newer car and work on it once in a blue moon then who cares. But if you have a lot of motors to work on or bigger jobs that take 10+ hours the little m12 is going to save you a lot of time. If you are a professional you already own one or use a pneumatic because your hearing is already shot and you love the speed.
Given the amount of 20 V DeWalt batteries I have, a few seconds in a couple foot pounds isn’t going to sway me to having to buy extra 12 V batteries. That was one of the things I had to consider in the price
I’ve been off the line now (sadly) for over a decade but when I bought my cordless ratchets, access meant more to me then anything else. I would gladly give up torque if it meant a smaller head and overall tool. I can break things loose manually and then use the cordless ratchet to spin it out but if I can’t fit it where I need it to go then it’s useless. Of course 15 years ago there weren’t very many cordless ratchets on the market anyways so my choices were limited regardless.
I've got the weak junky one from husky. I'm blown away by how handy it is. They're amazing, right up until the bolt is stiff the whole way out. Like old locktite or rust
I work in the tools department at Lowe's, and let me tell you this is priceless information! I'm a big fan of the DeWalt 12V sub-compact line. Their mechanical impacts are great too, putting out more power than the base 24V Kobalt impacts!
I currently buy most of my tools from Lowes since sears has been gone. I started with the brushless leaf blower weed trimmer combo for 149$ with a 4amp hr and a 2amp hr battery n charger. I followed with a battery operated air pump. Next came the free oscillation tool with the 2 4amp hr battery kit for 129$ with double battery charger. I also bought a kobalt double 5amp hr battery lawnmower. I know ego is a better mower slightly but their battery replacement is like 289$ just by itself. All I can say is stick to the battery platform that you have most of because as a non work professional, the batteries are the most expensive disposable part of the tools. With the experience of working with most power tools, I can attest that the kobalt brand of power tools will exceed the needs of the do it yourself home owners. Seeing kobalt tools tested as not being the worst tools in the market and that they can perform the tasks is another positive selling point as well. I will continue to purchase kobalt tools as long as their warranties, reliability, and costs are very good.
I can't speak for any of the others...but i got a good deal on the craftsman...and yes it fits my current stock of tools. I got sucked i to the craftsman line almost 2 years ago and have stayed with them mainly for the performance i have gotten for the price. That said...i have used that ratchet for a month or more now, and it has been amazing. I always break bolts or nuts by hand...but getting that thing in there and finishing the job where you can't get a swing with hand ratchets, has been a life saver! And talking of the craftsman line...i also ended up getting a deal on the mid-torque 1/2" impact...and that thing is way stronger than i would have thought! It has been blasting through pretty large rusty bolts on a project im doing. It has blown me away so far!
I'm a diesel tech, and I have the Mac Tools Electric ratchet (created with assistance from Dewalt, uses dewalt 12v batteries), and I can honestly say I don't think theres another ratchet on the market that I would choose over it. The head size, length, and ESPECIALLY the trigger style/control are absolutely perfect for the auto industry in my opinion. I have air ratchets with the "flap" style trigger seen on some of the other examples here and they're terrible to use when you're trying to snake around harnesses/lines/etc because the flap of that trigger hooks onto everything. Obviously everyone's decision will be different based on their preference and what they use it for.. but just a little something for you guys to think on before you pull the trigger (pun intended) on buying one.
@@Lee-lb9qh had the dewalt been at option when I bought mine I probably would’ve went that route.. i love the vertical battery mount. I do love having the Mac one though, our tool truck Stocks both brands but the warranty and rebuild process is easier with anything Mac.
I have both mac and the dewalt 12v 3/8. And the dewalt is hands down more powerful then the mac. Usually with the mac I would have to go in with a ratchet and finish tightening up the nut or bolt, but with the dewalt its got way more torque.
@@bad1971nova how do the head sizes and just general ergonomics compare, having used both of them? They seem pretty similar in this regard just looking at them online but I haven't actually held either of them. I'm invested in the Dewalt 12V line and I'm maybe in the market for a ratchet soon, the Mac definitely isn't cheap but I figure buy once cry once...
I’m buying the Dewalt atomic 20v these comments and other reviews just convinced me plus I have like 4 20v Dewalt batteries so not worth switching when I just fix and flip cars
A lot of times when Project Farm does a battery tool test my preferred dewalt brand ranks very good. Not always top but always good enough to keep me loyal. I needed a ratchet however but until recently dewalt had none! I was about to go m18. This test makes my decision for me as I have many 12V dewalt batteries because the small 12v drill is awesome! And I like less cost too lol
Same here, when you are working on a car you want a tool that you feel confident will have the best chance possible of reaching a fastener without a lot of fuss. Milwaukee is the only brand that has that down pat with their small torpedo style batteries
I have the M12 brushed as well and it is great. I am a Dewalt guy but bought into the M12 brushed line for simple around-the-house stuff. I am very happy with that line and their ratchet is excellent.
The 12v is not very expensive to get into (my opinion). I do like the extra variety in smaller tools that the 12v line opens up. Though the atomic series on 20v seem to catch up.
Thank you for testing the Kobalt and Craftsman. I already own the Kobalt XTR and I'm going to buy the blue box store brand. Thanks again. You guys keep saving money.
Speed is king with ratchets. Higher torque is a mixed bag. Mostly bad in my opinion. Anything above about 60 ft lbs is a knuckle buster. I like to finish fasteners off manually. Better feel that way. But that's me doing what I do. Folks who don't work in tight spaces may love the higher torque. Milwaukee just announced high speed extended ratchets. Good stuff! Keep up the great work.
Picked up an Xtreme brushless 12v ratchet and 12v 3/8 impact, with a 3ah & 5ah battery for $155 total from home improvement store. Seemed like quite a good deal that I couldn’t pass up on. Was initially disappointed though when I got home and saw they were 12v and being unfamiliar with the 12v system and not being usable with all my 20v batteries, but after these tests at least I feel quite pleased.
I've had a Posenpro 3/8" the last 4 weeks. It was €60 off Amazon. Wrench & 2 batteries. I charged the batteries the day it arrived - so far it's still on the first battery on the first charge. Today the battery started whinging for more charge - I have used it daily for work not play & love it. Don't fancy changing it for anything "fancier" as it does everything I ask of it & has yet to even once "annoy" me. It's a brilliant tool IMHO and has now moved into "My Fave tool" category alongside my 1/2" Dewalt impact gun I also use daily. Just my 2c.
I’m fine with my craftsman, just take care of your tools and use them for what they are intended and you won’t have a problem, if you find that this doesn’t take off what you need, then grab the 3/8 impact gun, if that doesn’t work you got a seized bolt and should use heat and a breaker bar, 1/2” half impact gun may snap your bolt depending on its size but is also the next option
@@novavolks9652 i would recommend it, but at the same time depending on what year vehicle you have id probably take em off by hand cause they could be rusty and make things possibly worse, thats a high rust area, and these are not impact ratchets, most brands do not offer one yet except a small few, they would need to be cracked loose by hand and then this device will spin it off, really it a time saving tool
I had bought the kobalt before seeing this channel and it's been a great reliable tool. Definitely worth the money. It can he a lil awkward in some positions but it gas surprised me breaking loose some nuts and bolts.
Oh yeah, Kobalts tools in general are very much worth the money for me. I could get a more ergonomic tool for more money, but the tools that I use most often (the angle grinder and the standard impact wrench) work great and they aren't bulky or awkward.
I'm actually happy with where the Craftsman ended up. What more can you ask for with a 35ft/lb $99 ratchet. It's what I have and it's worked just fine. It's taken every bolt out I've used it on. And I use it on seat bolts.
@@chefshadetree3972 So if you recommend it? 😃 I'm thinking of buying it through Amazon, battery and charger included, the truth is Craftsman convinces me
I use these ratchets on the job daily assembling factory lines. The non-fuel M12 is the best one I've used. It's cheaper, lighter, has decent enough torque, and good battery life. The most importantly thing though is that it actually fits everywhere. The fuels are just too big. This is just my job so YMMV but I found several bolts in one day that I couldn't get on that I could easily with the regular m12. Also the fuel version ratchets really weird. I think it does that so it won't rip your wrist off, but I didn't like the feel of it. Its like the same thing as the fuel grinder. It will clutch out and stop if it thinks the blade is stuck whereas the non-fuel just runs to the limit of the battery and motor. Pretty sure its a safety feature but its pretty annoying.
Can't imagine it would make a difference, but I'd like to see if the DeWalt 20v 1/2" DCF512 is stronger than the 20v 3/8" DCF513 (they have the same specs, but as this test showed specs often mean very little).
Great video! I'd like to see how the new Makita 18v XRW01Z model and the old 12volt RW01Z to see how they stack up against each other and the competition.
And in case I haven't requested this before, I would really like to see impact drivers compared to the hydraulic gear drivers. I seriously use my m12 surge for just about everything any more, it's the perfect balance between noise, size and power. Predominantly I use it for 2.5" #10 wood screws and sheet metal screws. I'm a plumber, so when I'm installing screws to brace something, power means a lot less, because I'm installing 2-6 wood screws at the highest and any number of sheet metal screws.
The Makita cordless ratchet is notoriously missing here. Need one of these to test? I just picked one up and don't mind lending it for testing, if I can get it back.
Did you take apart the craftsmen and see what failed would love to know I have one does great as taking on and off bolts then use torque wrench for spec but it's been good to me got it for 52.86 cents and was happy to have it and has saved me more time than I thought a lot of time saved but would like to know what broke could be a pin that holds the metal piece that moves the head of the ratchet because it looked to bend at where plastic attaches to rachet head
I love when Lowe's does these Black Friday DeWalt 12v kits with a free tool. Been 3 years since I've seen them include the ratchet in that deal but it's back and it's glorious. End up paying like $40 for the ratchet total. Grabbed the 3/8 impact wrench as well. Not a big fan of the 12 drill and impact driver but still worth buying just for the free tools.
Have 4 Milwaukee Ratchets 1/4, 3/8, 3/8 long, 1/2-fuel all work fine..... but actually like the M12 2467-20 1/4 right angle Impact driver the most. use it with 1/4 drive and 3/8 drive sockets
Before I buy any tools I always like to see if Project Farm or this channel has made a video about it. It’s such useful information if you want to get the most out of your money. Don’t mind spending the extra on something as long as I know it’s going to be worth it.
Late coming to this video, but I'm not shocked by the results. Main reason why I bought the 12v version of the Dewalt ratchet, smaller / faster. Better to use out in the field when you don't have access to a compressed air tank. Great vid!
I use the Milwaukee 3/8 ext at work”automotive”everyday! I like it the only con I have is the finish on the head chips easily. Definitely get the boot for it I wouldn’t mind the regular version the heads are bigger than some but solid unit
That's my opinion too. And they do work pretty damn well, even under fairly heavy shop use. And the fact I can get a 5 inch angle grinder (tool only) for $10 more than I can get a 4.5" DeWalt tool only grinder, and the exact same price as the DeWalt 11 amp 4.5" corded grinder also makes it a huge plus for me. Not to mention that the pin wrench is stored in the detachable handle, so you aren't likely to misplace it like I was with my first grinder, which was a corded DeWalt
I would love to see this video with a Harbor Freight, Makita, Ryobi, and Walmart versions included. I love my HF version but Ive replaced it 3 times and thats why I love HF. No hassle and its a free replacement. I broke my Ryobi, Makita, and Snap On and none of them were easily replaced...the Makita broke the first time I used it and the Snap on actually costed me money to get it fixed.
This channel is leading the tool market to make stuff we want..its great..also informs the consumer to not be fooled and get again what we want.thanks ttc
I managed to get a combo deal from Lowes, the Extreme 12v ratchet and DCF911 20v 1/2 wrench, 2 batteries 1 charger, all for ~$135 , and came with the yelllow bag. The DCF stays in the trunk, zips the lug nutz right off. I do wish the ratchet had 3 speeds, its hard to keep it slow when tightening.
For what it’s worth, I have the large 20v atomic 1/2” impact wrench and the small Atomic 3/8” ratchet. They are just wonderful. No regrets. I purchased DeWalt after reading many bad reviews on Milwaukee impact wrench failures. Hope this. Helps.
@@Evanturar Well, I typically use a compact impact for lugs (can consistently run them down to around a quarter turn off needed torque), so sounds like the smaller one is the way to go :)
Hello again Torque Test Channel Thank you for another Great Video 👍 Have you tested the Harbor Freight versions against Milwaukee and Dewalt etc. I am researching for my next Tool purchase and power tools are on the list. I was looking at the Milwaukee M12 combo kit. Drill, impact wrench and ratchet.
Just picked up the 20V Atomic kit, including the 1.7 Amp/Hr pouch cell battery and charger for $100; it was sitting right next to the 20V Atomic bare tool for $200. They were discontinuing them.
I would like to see how many beans they would make when spun up and then slapped on the dyno. I use mine like this all the time, I know its not good for them but i have never broke my Milwaukee doing this
Can you test some corded impact wrenches? Seems like they would be a good option for the occasional-use home gamer. No batteries to keep charged if you’re not using it often, maybe more power for your money, etc.
I have a dewalt mechanics kit here in australia and i love it but a weird thing i have noticed is while they share the same part number mine say 18v and yours say 20v. Love the powerstack on my tools they go so much harder than the snap on I used to use.
Really hoping to see the SKIL PWRCORE 12V ratchet join the testing charts. It's supposed to be quite good and if love to see how it actually stacks up. Plus, SKIL seems to be overlooked a lot despite making very good products.
Yeah I'd love to see that. It and the Hart are my two most likely purchases in this category because they're my two still-alive battery platforms, though the AC Delco is also tempting.
I think the Skil will score quite well TBH--as you say Skil almost always impresses despite them not having the popularity factor. However no extended reach in their line, unfortunately. @@rpavlik1 The Delco brushless would be nice to see here--it might do well too. Though their extended is not brushless, not variable, and likely going to be worse than the "higher-end", but overall unimpressive, Durofix version they already tested. But if you already have Skil 12V stuff, I'd just go for the Skil.
Skil has a bit of a bad reputation. The eponymous worm gear drive circular saw is legendary, and everything else is regarded as badge engineering, bargain basement crap. I don’t know how much of that is deserved (still, or ever), but that’s the opinion of a lot of people I know.
Why no Makita in the lineup, or did i just miss it on the spreadsheet? Would love to see you jump into testing ratchets, and flex head ratchets. Since you kinda already dove into hand tools...Thanks!
I prefer my Snap on 14.4 rarchets as well as my all of my Milwaukee ratchets I have every Milwaukee ratchets including the Brushed great testing video wanted to get into the dewalt ratchets wasn't sure which though because I normaly always by each anvil size for convenience as a mechanic thanks @Torque Test Channel
Just set asside my old Ryobi Ni CAD set. Bought a dewalt atomic set. Definitely can't complain. Much more compact and way more capable. Might still get lithium battery set for the ryobi's as backups. Nice they are backwards compatible.
I have a matco 12 volt MCL1214RA cordless ratchet that I used every day, It is rated at 30 ft lbs, would be nice to see it on the list tested. It has the smallest head and foot print I have ever seen and gets into some really tight areas, I had this ratchet outlast 2 battery's. I actually tore apart a Milwaukee clone and stole the cells out of it to rebuild mine because matco are crazy money.
I got a stupid question for science ! Most 3/4" and 1" impacts have thru holes in the anvil so does this help deliver more torque to the fastener and or reduce the wear on the socket and anvil or is it just for keeping the socket on the impact 50 stories up along with safety reasons?
the 50 storys up in the sky thing. you put a steel pin in there and an o-ring over that to to be 100% shure nobody down there gets knocked out by a bigass socket. wheras the tool itself is secured with a spiral cord to the operator, that is hanging in his harness (or secured by). most professional handtools are available with carabiner hook for the same reason. for ex. knipex.
@@casemodder89 I knew that part but thank you i just wondered if there was any other benefit . I was just curious if it would increase the beans to the bolt or vibrate less being secured to the tool more along those lines of a stupid question . I'm thinking probably not but stranger things have happened.
Have you ever considered testing the Ingersoll Rand 1211MAX Series High Speed Impact Ratchet? I would love to see how a new-ish air ratchet compares to the latest battery-powered ratchets, and where it would place on your chart.
I have both 18 v and 12v platforms and have found that the 12 may fall short on total power for big fasteners but on the whole they last as long if not longer, are lighter and more comfortable to use and in most ways just as capable than their big counterparts. When you pair that with the lower cost for tools and batteries you may find them a better choice if you are just getting into buying your own tools. The new 12 v platforms are way better than the 12v of old.
My 3/8 M12 fuel ratchet acts like the craftsman did with big impact sockets. I don't think they like the extra weight of impact sockets. I use regular chrome sockets since they are lighter. And i don't have any problems with it. To be honest no electric ratchet creates enough torque to warrant impact sockets or extensions. And i dont know if you would consider it cheating or not but you should try a running head start with the fasters start the tool before you put it on the nut. I do this when I use mine and I rarely have to break nuts or bolts lose by hand.
Welp, a bit sad coming here to look at the Crapsman ratchet and seeing the result, but I definitely grab a breaker or impact before I’d get anywhere close to 100 ft lbs… might still choose it as the free tool with the 4ah/blower kit for $100. I was looking for a deal on a 4ah for the orbital/recip, and figured another blower for the paint booth wouldn’t be a bad addition, and I don’t have a 3/8” short cordless ratchet yet 🤷♂️😂
I’m thinking about this right now trying decide which free tool to get. Which they had put a few more options, but at the end of the day I don’t think you can beat the deal at $98.
would it be better to get an air ratchet? or are these cordless ratchets now faster than air ratchets. please excuse my noob mind I am just wanting something to run bolts faster than a hand ratchet
I’d be curious to see a comparison with the non-fuel m12. The head being quite a bit smaller than the fuel version could be more useful than a little extra speed
can i recommend doing bolt sizes M16-M20-M24, using nylocs, i'd love to see that as thats the sizes id use at work. i dont have big enough gaps to put a stubby. im fed up of air cables getting in the way tbh, plus i go to sites where it could be great
I love my dewalt 12v 3/8 ratchet. I have the mac 1/4 in so it made sense for me to go with the dewalt. I love it. I have alot of dewalt 20v but I just like the smaller battery on the 12v
If they offered more juice, they wouldn't be too bad with the lower capacity batteries for work that isn't as space restricted(maybe chassis & suspension work rather than under hood work?) - except the testing keeps showing us that they don't offer anything over the 12s. I don't blame the manufacturers for offering them, some people just only stick to larger battery platforms and ignore the smaller ones(getting harder and harder to ignore them as new 12s are essentially competing with old 20s, but with a much lower weight & smaller size - they're actually truly useful these days!), so it makes sense for those customers. I'm just glad this channel exists so I know that the 20s don't offer anything over the 12s - I hadn't used a power ratchet(well, only pneumatic), so always just assumed that the 20s would be 'OK' and the 12s would be 'useless'. Good to know that the 12s are actually useful enough to render the 20s pointless lol.
Those PowerStack cells need a resting time, they drop in voltage when worked hard.(then recover) for example they will drop to 1 bar while in use, wait a min or 2 and it goes back up to 2 bars, sometimes 3!! My Dewalt works "slower" with a powerstack opposed to a 5Ah pack. due to the powerstack voltage drop/droop.
May I step in and request that you test 90 degree adapters? They are meant for impact drivers (most of them!) And they really shouldn't be compared to ratchets. However, I'd love to see the winner amongst the adapters put through the gauntlet while being powered by a Milwaukee Gen 3.5 impact driver. For science! It would be a mashup for sure.
Will you be testing the new sealed dewalt ratchets, the DCF500 and DCF510? They have a huge RPM increase compared to these models. I wonder how that will impact the power.
I am thinking of buying a ratchet and your review is helping with that decision. but I am wondering if the 1/2 20v version of the dewalt would have the same results as the 3/8 20v of being slower then the 12v 3/8 version on your run?
Can you swap an extended head from a different ratchet onto the kobalt? I realize it's already pretty long, but it looks like it's designed to be swapped, and with the extra length I suspect it could be coaxed to higher power figures
I'm still waiting to see you guys test the Snap On e-ratchets. I have had a CTR7670 for the past few years and love it. I really just want to know how it stacks up.
Ok, is it me or does the Kobalt seem to be top one so far tested? Slower than some, but pretty fast, but cheaper than pretty much every one it was slower than by a considerable margin, and was the only one so far not to need help breaking some of those nuts free and having highest or second highest actual torque, especially with a 4 Ah battery? This surprised me, and makes me happy cause I actually have batteries for that lol.
O'Reilly's Auto parts power torque ratchet and impact they're 12 volt and 20 volt line and they have a 12 volt 3/8 in and then a 20 volt impact wrench half inch looks like just like a Milwaukee
FInallllllllly. I have the 20v craftsman which does the trick. But I want to get the dewalt because i'm mainly behind that battery system. But I do like my Craftsman. You have to know the trick with it. To get the extra 3x the torque out of it.
So I'm lost here I have Milwaukee 12 volt, is it worth getting one the inexpensive one you can buy on eBay for 80 bucks. If I go with the DeWalt 20-volt it's going to cost me $140 on eBay Fish or cut bait which one should I go with
Correction, RPM figures given such as at 8:07 are RPS (revolutions per second). For essentially about 200 RPM vs 160 RPM. We're used to counting frames for RPM on tools in the thousands of rippems in high speed footage!
I was just about to comment and ask. I’ve watched all your ratchet videos and have been confused and bewildered on all of them because of this. But now I know - thank you TTC.
I think this mistake was made in the previous video as well, completely understandable tho
I wonder how the original brushed milwaukee will compare to the other milwaukees. Im sure its not as fast as the high speed, but torque wise. I have the highspeed n im not a big fan because its so damn weak. I know its not meant to break fasteners free, but as you noticed as well, any resistance and its damn near useless. Living in boston, all the rust i see makes it, well...damn near useless lol. Its not bad for installing fastners as long as you have clean threads.
Why didn't you compare against the Makita 12v or 18v? Pretty sure those tools have more torque than any of these
Heads up, Kobalt made a new cordless ratchet. The ones that you guys tested are unavailable now. They have an extended reach version and a normal length version, I'd like to see it tested if you guys dont mind.
The DeWalt results just further support my opinion that between the red M12 line and the yellow Xtreme line, most advanced DIYer's and professionals that only need light-to-medium duty tools could do most tasks with just 12v stuff. Great tests!
But Makita makes 40v. That's more electrolytes.
@@galvanizedgnome XGT has what plants crave!
...but 12 is less than 20. So, like, it's less good?
As a mechanic, I can do about 80-90% of my work with an m12 stubby, ratchet, and driver. It's only with truck lug nuts and axle nuts that I use the shop high torque on. Can't wait for milwaukee to update their stuff honestly.
@@nateTrh my 12V Extreme DCF901 impact wrench can take the lug nuts off my Silverado torqued to spec @ 150lb-ft. I have the M18 mid-torque for the hard stuff, but I haven't needed it yet.
With all the 20v Dewalt batteries I have, it's not worth switching to the 12v version with slightly better results. As you stated at the end, just looking for tools that support my battery line.
Understandable, but at least they utilize the same charger between 12 and 20v.
The difference in size between 20v and 12v batteries is massive. You definitely feel the extra heft.
For me personally, this category of tools is less about torque and more about size. These power tools are competing against hand rachets. I think even rpm speed means less then size. I bought one of these and never used it until I got the milwaukee with the compact battery. Now I use it everyday because it can fit into 90% of the areas my hand rachet does.
*Than size. Not then.
@@jumpinjojo wow, you must be fun at parties.
@@bigneek714 Thank you for your support.
100% agree, these tools are most useful as bolt runners in tight fit spaces.
18v rachets don't make any sense.
THANK YOU TTC FOR YOUR TIME TO SHOW US PEOPLE WHAT IS WHAT.. I honestly bet RUclips takes a good chunk of your life and I personally wanted to say thank you because some of us are not smart enough or rich enough to buy multiple things to figure out which is the cats meow.. You and project farm got my heart
I went ahead and bought one of the DeWalt 12v ratchets when they first hit the shelves at my local Lowe's. I figured that the smaller battery footprint would be better in the hand than the 2-ah 20v batteries I have for my compact drill and impact driver. I also don't mind having the 12v cordless screwdriver I bought as well, as that seemed to be the cheapest way to get 2 12v batteries and a charger. It's nice to know that I don't have to feel regret about not waiting for the 20v ratchet.
I know this is an older video, but I'd love to see an update to include the Makita ratchet in the mix. It's speed is almost double Milwaukee with the same torque. As well as having interchangeable 1/4" and 3/8" heads.
Downside to the 12v is I already have a 20v Dewalt system (slowly migrating from Black and Decker 20v), while I find an impact driver great overall, a ratchet seems better suited for automotive tighter space use.
That's the entire point of the Atomic line up. Basically give you the 12v line size but you can continue to use your 20v batteries. Dewalt was getting slammed a few years ago because they have a very large product line using a lot of different batteries. They have been simplifying and overhauling their product line ever since.
I don't care how long you have been wrenching but you aren't going to out pace one of these. Now if you have a newer car and work on it once in a blue moon then who cares. But if you have a lot of motors to work on or bigger jobs that take 10+ hours the little m12 is going to save you a lot of time.
If you are a professional you already own one or use a pneumatic because your hearing is already shot and you love the speed.
So you’re safe using a 20v impact driver as a ratchet, like for tightening lug nuts?
Black n Decker own craftsman, DeWalt, Ridgid, and skil, I think Ryobi too. The craftsman rp stuff has the same motors as last yrs DeWalt XP line
@@itz5amI use a craftsman brushless drill/driver with socket bit for small bolts all the time , especially for small engines .
Given the amount of 20 V DeWalt batteries I have, a few seconds in a couple foot pounds isn’t going to sway me to having to buy extra 12 V batteries. That was one of the things I had to consider in the price
same here
then again the 12v fit in the 20v charger and maybe can be had cheap as a kit around the fall when all the crap is "onsale"
Same here, I have enough smaller AH 20v batteries that any advantage a 12v ratchet might have is negated by having to buy more batteries.
Besides these are competing against hand ratchets so there is no need for crazy tq. Just need it for speed vs doing it by hand.
You’ve said it perfectly. Once we commit to a battery platform, it’s nice to keep all of the tools compatible.
I’ve been off the line now (sadly) for over a decade but when I bought my cordless ratchets, access meant more to me then anything else. I would gladly give up torque if it meant a smaller head and overall tool. I can break things loose manually and then use the cordless ratchet to spin it out but if I can’t fit it where I need it to go then it’s useless. Of course 15 years ago there weren’t very many cordless ratchets on the market anyways so my choices were limited regardless.
I've got the weak junky one from husky. I'm blown away by how handy it is. They're amazing, right up until the bolt is stiff the whole way out. Like old locktite or rust
@@taylor2105 Do you recommend the Craftsman Cordless Ratchet?
I work in the tools department at Lowe's, and let me tell you this is priceless information! I'm a big fan of the DeWalt 12V sub-compact line. Their mechanical impacts are great too, putting out more power than the base 24V Kobalt impacts!
The problem with 12V is that it’s the same size as the 20V. Dewalt should have made it half the width for thinner tools.
I currently buy most of my tools from Lowes since sears has been gone. I started with the brushless leaf blower weed trimmer combo for 149$ with a 4amp hr and a 2amp hr battery n charger. I followed with a battery operated air pump. Next came the free oscillation tool with the 2 4amp hr battery kit for 129$ with double battery charger. I also bought a kobalt double 5amp hr battery lawnmower. I know ego is a better mower slightly but their battery replacement is like 289$ just by itself. All I can say is stick to the battery platform that you have most of because as a non work professional, the batteries are the most expensive disposable part of the tools. With the experience of working with most power tools, I can attest that the kobalt brand of power tools will exceed the needs of the do it yourself home owners. Seeing kobalt tools tested as not being the worst tools in the market and that they can perform the tasks is another positive selling point as well. I will continue to purchase kobalt tools as long as their warranties, reliability, and costs are very good.
I can't speak for any of the others...but i got a good deal on the craftsman...and yes it fits my current stock of tools. I got sucked i to the craftsman line almost 2 years ago and have stayed with them mainly for the performance i have gotten for the price. That said...i have used that ratchet for a month or more now, and it has been amazing. I always break bolts or nuts by hand...but getting that thing in there and finishing the job where you can't get a swing with hand ratchets, has been a life saver! And talking of the craftsman line...i also ended up getting a deal on the mid-torque 1/2" impact...and that thing is way stronger than i would have thought! It has been blasting through pretty large rusty bolts on a project im doing. It has blown me away so far!
I'm a diesel tech, and I have the Mac Tools Electric ratchet (created with assistance from Dewalt, uses dewalt 12v batteries), and I can honestly say I don't think theres another ratchet on the market that I would choose over it. The head size, length, and ESPECIALLY the trigger style/control are absolutely perfect for the auto industry in my opinion. I have air ratchets with the "flap" style trigger seen on some of the other examples here and they're terrible to use when you're trying to snake around harnesses/lines/etc because the flap of that trigger hooks onto everything.
Obviously everyone's decision will be different based on their preference and what they use it for.. but just a little something for you guys to think on before you pull the trigger (pun intended) on buying one.
@@Lee-lb9qh had the dewalt been at option when I bought mine I probably would’ve went that route.. i love the vertical battery mount. I do love having the Mac one though, our tool truck Stocks both brands but the warranty and rebuild process is easier with anything Mac.
I have both mac and the dewalt 12v 3/8. And the dewalt is hands down more powerful then the mac. Usually with the mac I would have to go in with a ratchet and finish tightening up the nut or bolt, but with the dewalt its got way more torque.
@@bad1971nova how do the head sizes and just general ergonomics compare, having used both of them? They seem pretty similar in this regard just looking at them online but I haven't actually held either of them. I'm invested in the Dewalt 12V line and I'm maybe in the market for a ratchet soon, the Mac definitely isn't cheap but I figure buy once cry once...
I’m buying the Dewalt atomic 20v these comments and other reviews just convinced me plus I have like 4 20v Dewalt batteries so not worth switching when I just fix and flip cars
A lot of times when Project Farm does a battery tool test my preferred dewalt brand ranks very good. Not always top but always good enough to keep me loyal. I needed a ratchet however but until recently dewalt had none! I was about to go m18. This test makes my decision for me as I have many 12V dewalt batteries because the small 12v drill is awesome! And I like less cost too lol
Milwaukee Beats DeWalt hands down, in fact I take Makita over DeWalt...imo
I still have the 1st generation brushed M12 ratchet, I don't see myself replacing it with any of these, the tools and battery setups just look huge!
Same here, when you are working on a car you want a tool that you feel confident will have the best chance possible of reaching a fastener without a lot of fuss. Milwaukee is the only brand that has that down pat with their small torpedo style batteries
I have the M12 brushed as well and it is great. I am a Dewalt guy but bought into the M12 brushed line for simple around-the-house stuff. I am very happy with that line and their ratchet is excellent.
Fascinating. Although I’ll probably just get the 20V DeWalt because I’m already invested in the 20V batteries.
Same. Sucks to be honest, but just having a battery on hand makes the bare tool the cheapest option.
The 12v is not very expensive to get into (my opinion). I do like the extra variety in smaller tools that the 12v line opens up. Though the atomic series on 20v seem to catch up.
Thank you for testing the Kobalt and Craftsman. I already own the Kobalt XTR and I'm going to buy the blue box store brand. Thanks again. You guys keep saving money.
Speed is king with ratchets. Higher torque is a mixed bag. Mostly bad in my opinion. Anything above about 60 ft lbs is a knuckle buster. I like to finish fasteners off manually. Better feel that way. But that's me doing what I do. Folks who don't work in tight spaces may love the higher torque. Milwaukee just announced high speed extended ratchets. Good stuff! Keep up the great work.
Picked up an Xtreme brushless 12v ratchet and 12v 3/8 impact, with a 3ah & 5ah battery for $155 total from home improvement store. Seemed like quite a good deal that I couldn’t pass up on. Was initially disappointed though when I got home and saw they were 12v and being unfamiliar with the 12v system and not being usable with all my 20v batteries, but after these tests at least I feel quite pleased.
I've had a Posenpro 3/8" the last 4 weeks. It was €60 off Amazon. Wrench & 2 batteries. I charged the batteries the day it arrived - so far it's still on the first battery on the first charge. Today the battery started whinging for more charge - I have used it daily for work not play & love it. Don't fancy changing it for anything "fancier" as it does everything I ask of it & has yet to even once "annoy" me. It's a brilliant tool IMHO and has now moved into "My Fave tool" category alongside my 1/2" Dewalt impact gun I also use daily.
Just my 2c.
I’m fine with my craftsman, just take care of your tools and use them for what they are intended and you won’t have a problem, if you find that this doesn’t take off what you need, then grab the 3/8 impact gun, if that doesn’t work you got a seized bolt and should use heat and a breaker bar, 1/2” half impact gun may snap your bolt depending on its size but is also the next option
Do you recommend a Craftsman cordless ratchet? I'm thinking of buying it for small screws to remove car fenders
@@novavolks9652 i would recommend it, but at the same time depending on what year vehicle you have id probably take em off by hand cause they could be rusty and make things possibly worse, thats a high rust area, and these are not impact ratchets, most brands do not offer one yet except a small few, they would need to be cracked loose by hand and then this device will spin it off, really it a time saving tool
I had bought the kobalt before seeing this channel and it's been a great reliable tool. Definitely worth the money. It can he a lil awkward in some positions but it gas surprised me breaking loose some nuts and bolts.
Oh yeah, Kobalts tools in general are very much worth the money for me. I could get a more ergonomic tool for more money, but the tools that I use most often (the angle grinder and the standard impact wrench) work great and they aren't bulky or awkward.
I'm actually happy with where the Craftsman ended up. What more can you ask for with a 35ft/lb $99 ratchet. It's what I have and it's worked just fine. It's taken every bolt out I've used it on. And I use it on seat bolts.
I have it as well and I can’t report any problems, dropped it a good few times and it’s just fine
Not to mention Craftsman gave a 4.0ah battery with Charger AND RATCHET for 99$ during Holidays
@@Dannyboy-nj4wh why and when I got one lol
@@chefshadetree3972 So if you recommend it? 😃 I'm thinking of buying it through Amazon, battery and charger included, the truth is Craftsman convinces me
I use these ratchets on the job daily assembling factory lines. The non-fuel M12 is the best one I've used. It's cheaper, lighter, has decent enough torque, and good battery life. The most importantly thing though is that it actually fits everywhere. The fuels are just too big. This is just my job so YMMV but I found several bolts in one day that I couldn't get on that I could easily with the regular m12.
Also the fuel version ratchets really weird. I think it does that so it won't rip your wrist off, but I didn't like the feel of it. Its like the same thing as the fuel grinder. It will clutch out and stop if it thinks the blade is stuck whereas the non-fuel just runs to the limit of the battery and motor. Pretty sure its a safety feature but its pretty annoying.
Ok so I will get the inexpensive 12m milwaukee.$78 on eBay.
Can't imagine it would make a difference, but I'd like to see if the DeWalt 20v 1/2" DCF512 is stronger than the 20v 3/8" DCF513 (they have the same specs, but as this test showed specs often mean very little).
Great video! I'd like to see how the new Makita 18v XRW01Z model and the old 12volt RW01Z to see how they stack up against each other and the competition.
All are damn nice!!! Here in Illinois most bolts are rusty all the way in and out. I understand the speed over torque for most. I need it powerful
And in case I haven't requested this before, I would really like to see impact drivers compared to the hydraulic gear drivers.
I seriously use my m12 surge for just about everything any more, it's the perfect balance between noise, size and power.
Predominantly I use it for 2.5" #10 wood screws and sheet metal screws.
I'm a plumber, so when I'm installing screws to brace something, power means a lot less, because I'm installing 2-6 wood screws at the highest and any number of sheet metal screws.
See the flex impact driver, they dont like being dyno'd
The Makita cordless ratchet is notoriously missing here.
Need one of these to test? I just picked one up and don't mind lending it for testing, if I can get it back.
Did you take apart the craftsmen and see what failed would love to know I have one does great as taking on and off bolts then use torque wrench for spec but it's been good to me got it for 52.86 cents and was happy to have it and has saved me more time than I thought a lot of time saved but would like to know what broke could be a pin that holds the metal piece that moves the head of the ratchet because it looked to bend at where plastic attaches to rachet head
I have the 12v dewalt ratchet as a Subaru mechanic. Great tool for the things I do!
I love when Lowe's does these Black Friday DeWalt 12v kits with a free tool. Been 3 years since I've seen them include the ratchet in that deal but it's back and it's glorious. End up paying like $40 for the ratchet total. Grabbed the 3/8 impact wrench as well. Not a big fan of the 12 drill and impact driver but still worth buying just for the free tools.
Whoa gonna check it out
Have 4 Milwaukee Ratchets 1/4, 3/8, 3/8 long, 1/2-fuel all work fine..... but actually like the M12 2467-20 1/4 right angle Impact driver the most. use it with 1/4 drive and 3/8 drive sockets
Same here 👍
Before I buy any tools I always like to see if Project Farm or this channel has made a video about it. It’s such useful information if you want to get the most out of your money. Don’t mind spending the extra on something as long as I know it’s going to be worth it.
More compact= win
I'd love to see all of those ratchets inside the engine bay :)))
Late coming to this video, but I'm not shocked by the results. Main reason why I bought the 12v version of the Dewalt ratchet, smaller / faster. Better to use out in the field when you don't have access to a compressed air tank. Great vid!
I use the Milwaukee 3/8 ext at work”automotive”everyday! I like it the only con I have is the finish on the head chips easily. Definitely get the boot for it I wouldn’t mind the regular version the heads are bigger than some but solid unit
ive been using the older ryobi ratchet with a dewalt battery adapter. not super compact but gets the job done.
I have had real good luck with my kobalt it’s done everything so far i use it every day working on utv engines
I like the Kobalt just on price - they look to be good value for money - not fancy, but functional.
That's my opinion too. And they do work pretty damn well, even under fairly heavy shop use. And the fact I can get a 5 inch angle grinder (tool only) for $10 more than I can get a 4.5" DeWalt tool only grinder, and the exact same price as the DeWalt 11 amp 4.5" corded grinder also makes it a huge plus for me. Not to mention that the pin wrench is stored in the detachable handle, so you aren't likely to misplace it like I was with my first grinder, which was a corded DeWalt
I would love to see this video with a Harbor Freight, Makita, Ryobi, and Walmart versions included.
I love my HF version but Ive replaced it 3 times and thats why I love HF. No hassle and its a free replacement.
I broke my Ryobi, Makita, and Snap On and none of them were easily replaced...the Makita broke the first time I used it and the Snap on actually costed me money to get it fixed.
This channel is leading the tool market to make stuff we want..its great..also informs the consumer to not be fooled and get again what we want.thanks ttc
I managed to get a combo deal from Lowes, the Extreme 12v ratchet and DCF911 20v 1/2 wrench, 2 batteries 1 charger, all for ~$135 , and came with the yelllow bag.
The DCF stays in the trunk, zips the lug nutz right off.
I do wish the ratchet had 3 speeds, its hard to keep it slow when tightening.
I need to get my hands on one of these Dewalts :)
Great testing as usual TTC!
For what it’s worth, I have the large 20v atomic 1/2” impact wrench and the small Atomic 3/8” ratchet. They are just wonderful. No regrets. I purchased DeWalt after reading many bad reviews on Milwaukee impact wrench failures. Hope this. Helps.
@@Evanturar Good to know! Which do you prefer out of the two?
@@SomeGuysGarage One is huge for lug nuts and larger hardware and the other is compact for tighter spaces. Like them both.
@@Evanturar Well, I typically use a compact impact for lugs (can consistently run them down to around a quarter turn off needed torque), so sounds like the smaller one is the way to go :)
Do the Dewalt batteries work on the Craftsman?
Have and use the Kobalt as an extended reach, strong option, and the M12 High Speed for most other things. Those 2 make a great pair.
Hello again Torque Test Channel
Thank you for another Great Video 👍 Have you tested the Harbor Freight versions against Milwaukee and Dewalt etc. I am researching for my next Tool purchase and power tools are on the list. I was looking at the Milwaukee M12 combo kit. Drill, impact wrench and ratchet.
This is better than the TV I grew up with
For most folks it’s about value, not single-digit max torque values. I like the free lifetime battery replacement options.
The only Ryobi tool I have lol. Love that I can point the head anywhere.
Could the 20V version have a long duty life? Motor / Gear duty life always comes into mind when I see tests like these.
I love the tool companies competing. Gives us awesome tools to use. Well done video as always
And they say capitalism doesn’t work!
Just picked up the 20V Atomic kit, including the 1.7 Amp/Hr pouch cell battery and charger for $100; it was sitting right next to the 20V Atomic bare tool for $200. They were discontinuing them.
actually like the M12 2467-20 1/4 right angle Impact driver the most. use it with 1/4 drive and 3/8 drive sockets
Would you be doing a tool truck brand for cordless ratchets like you did with Impacts? That would be something to see. Great video!!
I would like to see how many beans they would make when spun up and then slapped on the dyno. I use mine like this all the time, I know its not good for them but i have never broke my Milwaukee doing this
Can you test some corded impact wrenches? Seems like they would be a good option for the occasional-use home gamer. No batteries to keep charged if you’re not using it often, maybe more power for your money, etc.
i picked up the dewalt 20v 1/2” version. works great for heavy equipment work. been looking for the 12v extended
I have a dewalt mechanics kit here in australia and i love it but a weird thing i have noticed is while they share the same part number mine say 18v and yours say 20v. Love the powerstack on my tools they go so much harder than the snap on I used to use.
They aren't allowed to call it 20V in some countries because technically it's a 18V nominal pack.
Really hoping to see the SKIL PWRCORE 12V ratchet join the testing charts. It's supposed to be quite good and if love to see how it actually stacks up. Plus, SKIL seems to be overlooked a lot despite making very good products.
Yeah I'd love to see that. It and the Hart are my two most likely purchases in this category because they're my two still-alive battery platforms, though the AC Delco is also tempting.
I think the Skil will score quite well TBH--as you say Skil almost always impresses despite them not having the popularity factor. However no extended reach in their line, unfortunately. @@rpavlik1 The Delco brushless would be nice to see here--it might do well too. Though their extended is not brushless, not variable, and likely going to be worse than the "higher-end", but overall unimpressive, Durofix version they already tested. But if you already have Skil 12V stuff, I'd just go for the Skil.
Skil has a bit of a bad reputation. The eponymous worm gear drive circular saw is legendary, and everything else is regarded as badge engineering, bargain basement crap. I don’t know how much of that is deserved (still, or ever), but that’s the opinion of a lot of people I know.
Why no Makita in the lineup, or did i just miss it on the spreadsheet? Would love to see you jump into testing ratchets, and flex head ratchets. Since you kinda already dove into hand tools...Thanks!
I prefer my Snap on 14.4 rarchets as well as my all of my Milwaukee ratchets I have every Milwaukee ratchets including the Brushed great testing video wanted to get into the dewalt ratchets wasn't sure which though because I normaly always by each anvil size for convenience as a mechanic thanks @Torque Test Channel
Just set asside my old Ryobi Ni CAD set.
Bought a dewalt atomic set.
Definitely can't complain.
Much more compact and way more capable.
Might still get lithium battery set for the ryobi's as backups. Nice they are backwards compatible.
Just got the dewalt 20v a few days ago and it's badass
I have a matco 12 volt MCL1214RA cordless ratchet that I used every day, It is rated at 30 ft lbs, would be nice to see it on the list tested. It has the smallest head and foot print I have ever seen and gets into some really tight areas, I had this ratchet outlast 2 battery's. I actually tore apart a Milwaukee clone and stole the cells out of it to rebuild mine because matco are crazy money.
Thought Dewalt made the matco actually before they branded their own.
Never mind it was Mac.
I got a stupid question for science ! Most 3/4" and 1" impacts have thru holes in the anvil so does this help deliver more torque to the fastener and or reduce the wear on the socket and anvil or is it just for keeping the socket on the impact 50 stories up along with safety reasons?
the 50 storys up in the sky thing.
you put a steel pin in there and an o-ring over that to to be 100% shure nobody down there gets knocked out by a bigass socket. wheras the tool itself is secured with a spiral cord to the operator, that is hanging in his harness (or secured by).
most professional handtools are available with carabiner hook for the same reason. for ex. knipex.
@@casemodder89 I knew that part but thank you i just wondered if there was any other benefit . I was just curious if it would increase the beans to the bolt or vibrate less being secured to the tool more along those lines of a stupid question . I'm thinking probably not but stranger things have happened.
Is the 1/2 stuff in line next? Or has Milwaukee been the only one to make one so far? I'm usually pretty impressed what mine will pull off
Thanks I’m a dewalt fan but I didn’t know this tool exist
Have you ever considered testing the Ingersoll Rand 1211MAX Series High Speed Impact Ratchet? I would love to see how a new-ish air ratchet compares to the latest battery-powered ratchets, and where it would place on your chart.
I have both 18 v and 12v platforms and have found that the 12 may fall short on total power for big fasteners but on the whole they last as long if not longer, are lighter and more comfortable to use and in most ways just as capable than their big counterparts. When you pair that with the lower cost for tools and batteries you may find them a better choice if you are just getting into buying your own tools. The new 12 v platforms are way better than the 12v of old.
My 3/8 M12 fuel ratchet acts like the craftsman did with big impact sockets. I don't think they like the extra weight of impact sockets. I use regular chrome sockets since they are lighter. And i don't have any problems with it. To be honest no electric ratchet creates enough torque to warrant impact sockets or extensions. And i dont know if you would consider it cheating or not but you should try a running head start with the fasters start the tool before you put it on the nut. I do this when I use mine and I rarely have to break nuts or bolts lose by hand.
Welp, a bit sad coming here to look at the Crapsman ratchet and seeing the result, but I definitely grab a breaker or impact before I’d get anywhere close to 100 ft lbs… might still choose it as the free tool with the 4ah/blower kit for $100. I was looking for a deal on a 4ah for the orbital/recip, and figured another blower for the paint booth wouldn’t be a bad addition, and I don’t have a 3/8” short cordless ratchet yet 🤷♂️😂
I’m thinking about this right now trying decide which free tool to get. Which they had put a few more options, but at the end of the day I don’t think you can beat the deal at $98.
would it be better to get an air ratchet? or are these cordless ratchets now faster than air ratchets. please excuse my noob mind I am just wanting something to run bolts faster than a hand ratchet
Just got the M12 high speed 3/8” for almost half off at HD 😁😁
I’d be curious to see a comparison with the non-fuel m12. The head being quite a bit smaller than the fuel version could be more useful than a little extra speed
It is way more useful but i couldn’t get it to last longer than a month. After buying about 5 of them I bought a snap on
I think the head size is the biggest factor. If the ratchet will not fit in the tight space, it's useless.
Very informative, once again. This is such a great channel!
can i recommend doing bolt sizes M16-M20-M24, using nylocs, i'd love to see that as thats the sizes id use at work. i dont have big enough gaps to put a stubby. im fed up of air cables getting in the way tbh, plus i go to sites where it could be great
Just picked up 2 of the Dewalt DCF513 in a kit with a powerstack and a charger for 100 each on clearance at home depot.
I love my dewalt 12v 3/8 ratchet. I have the mac 1/4 in so it made sense for me to go with the dewalt. I love it. I have alot of dewalt 20v but I just like the smaller battery on the 12v
Big fat batteries on a compact space tool are a no-go. 12V Milwaukee for the win.
If they offered more juice, they wouldn't be too bad with the lower capacity batteries for work that isn't as space restricted(maybe chassis & suspension work rather than under hood work?) - except the testing keeps showing us that they don't offer anything over the 12s. I don't blame the manufacturers for offering them, some people just only stick to larger battery platforms and ignore the smaller ones(getting harder and harder to ignore them as new 12s are essentially competing with old 20s, but with a much lower weight & smaller size - they're actually truly useful these days!), so it makes sense for those customers.
I'm just glad this channel exists so I know that the 20s don't offer anything over the 12s - I hadn't used a power ratchet(well, only pneumatic), so always just assumed that the 20s would be 'OK' and the 12s would be 'useless'. Good to know that the 12s are actually useful enough to render the 20s pointless lol.
Those PowerStack cells need a resting time, they drop in voltage when worked hard.(then recover) for example they will drop to 1 bar while in use, wait a min or 2 and it goes back up to 2 bars, sometimes 3!! My Dewalt works "slower" with a powerstack opposed to a 5Ah pack. due to the powerstack voltage drop/droop.
May I step in and request that you test 90 degree adapters? They are meant for impact drivers (most of them!) And they really shouldn't be compared to ratchets.
However, I'd love to see the winner amongst the adapters put through the gauntlet while being powered by a Milwaukee Gen 3.5 impact driver.
For science! It would be a mashup for sure.
At 12:17, you resort the graph and show #2 through #9. What's #1?
Milwaukee high speed ratchet
So I'll definitely be buying the 503E Dewalt to go along with my Mac cordless ratchet
Will you be testing the new sealed dewalt ratchets, the DCF500 and DCF510? They have a huge RPM increase compared to these models. I wonder how that will impact the power.
Is there a performance difference e tween the 1/4” and 3/8” dewalt 12v ratchets?
I am thinking of buying a ratchet and your review is helping with that decision. but I am wondering if the 1/2 20v version of the dewalt would have the same results as the 3/8 20v of being slower then the 12v 3/8 version on your run?
I liked your video thank you for doing Kobalt test, all my power tools are Kobalt, and so are a lot of my hand tools.
Can you swap an extended head from a different ratchet onto the kobalt? I realize it's already pretty long, but it looks like it's designed to be swapped, and with the extra length I suspect it could be coaxed to higher power figures
I would like to see you test out the hart 20v cordless ratchet.
I'm still waiting to see you guys test the Snap On e-ratchets. I have had a CTR7670 for the past few years and love it. I really just want to know how it stacks up.
Ok, is it me or does the Kobalt seem to be top one so far tested? Slower than some, but pretty fast, but cheaper than pretty much every one it was slower than by a considerable margin, and was the only one so far not to need help breaking some of those nuts free and having highest or second highest actual torque, especially with a 4 Ah battery? This surprised me, and makes me happy cause I actually have batteries for that lol.
I got the kobalt for 60 bucks brand new on clearance a month ago. 😀
Why you dont show all the rating shart in the épisode i whant to know wherw is the milwaukee m12 extended on shart
Its shown here as the standard length, to not penalize it for weight since its the same performance long and short
Why there was no torque test for Milwaukee ratchet?
O'Reilly's Auto parts power torque ratchet and impact they're 12 volt and 20 volt line and they have a 12 volt 3/8 in and then a 20 volt impact wrench half inch looks like just like a Milwaukee
I would really like to see the Makita right angle ratchet and right angle impact wrench tested
I was just checking out the 12v Dewalt one at Lowes.
FInallllllllly. I have the 20v craftsman which does the trick. But I want to get the dewalt because i'm mainly behind that battery system. But I do like my Craftsman. You have to know the trick with it. To get the extra 3x the torque out of it.
Please tell
So I'm lost here I have Milwaukee 12 volt, is it worth getting one the inexpensive one you can buy on eBay for 80 bucks. If I go with the DeWalt 20-volt it's going to cost me $140 on eBay Fish or cut bait which one should I go with