Sitting in the same identical model bmw with exact same issue! Trunk lid popped open overnight and rain got into trunk a few days later screen went out, same noise under hood same low battery! Thanks a million for making this video and confirming the problem and presenting the solution! Cheers from SC USA!
Update, MPM switched out radio and screen are back Thanks a bunch! The car still won't start could be starter, was hoping this was the culprit for the no start issue also for anyone trying to remove the module you grab the side where the red wires are and push module away from harness. It doesn't unplug like it looks.
@@petewilliams9493 It will come unfastened. There is another video that explained it much better than I can. Inevitably I had it towed to the dealer and 900$ later its good.
update: I changed the MPM module & my fuses are gd but my shit still didnt come back on smfh... so I guess I have 2 hit up a junk yard & get the ccc unit or icu unit to get my ride back right... thx 4 the vid bro, great report...
Exact sane thing - I just opened up the boot and the base was sopping wet. Is it necessary to replace the loom and MDM or can I wait for it all to dry out ?
My e60 ccc module sometimes not working after 1 or 2 hours but im doing hard reset and he starts to work. When i start ccc module under 15 20 minutes its work. And sometimes language automaticly change to italiano. Do you help me?
Hallo from Germany i would like to make a description of what happened 2 days ago on my bmw e60 545 2004 model. We've had bad weather for three days now. it was snowing and raining. i had my car immobilized for three days. I got up today to start the car but it had probably used up the battery which is brand new.(what the hell) Before this event everything was working fine with no problems whatsoever. I wire up to power my car and then find what you describe. The screen does not work and neither does the radio. Also all the lights came on like abs, esp which before did not come on I had no such problem. do you think that's the problem? The module? I check the fuse 7,5 but is not broken its ok.....and nothing blow as you showing on your video Thanks Greetings Alex
Thank you for your video its great. So if this module is no good would that be a reason why my screen and the ccc unit is not working. The ccc unit turns on and off but the screen doesn't. I really appreciate any advice please
Hey thanks for the video. I am in same situation 2004 BMW 530i trunk was open water went in. MPM burnt smoke was all in the car no power drain though car started and everything works. Changed the module same number but no power to radio. Sos light on. Any help be appreciated. thanks
@@FixYOURride13 I did check like you mention 7.5 amp and fuses in the glove compartment. I spoke to someone else they think I fried the radio. MPM needs coding?
I always get a kick out of when they put electronics in a "liquid collection" area or like when Ford makes their heater cores higher than the rest of the coolant system so air can get trapped in it.
I have the same problem, but my ? is how do take apart the piece 2 check if the MPM is good or not... tried pulling it apart but did not detach... thx 4 this vid, I went & brought a loop from amazon thinking that was the problem & couldn't find where 2 connect it smh... plz help, also the rain got into my trunk as well... funny that's how this event is happening 2 everyone the same way....
@@petewilliams9493 ok... did you have a flooded MPM module? -you spilled water from him ? -the connector from the MPM module is corroded? -The Fuse was blow? -The Alternator did not charging ?
@@FixYOURride13 I checked the fuses & 2 my surprise, the whole section where the 7.5 fuse is doesn't work literally... I thought the store sold me bad fuses but when I put the fuses in other slots of the fuse box, they worked but when I put them back over to that side it didn't... so how do i fix that problem... thx 4 responding...
@@petewilliams9493 hi, you check the fuses when ignition is ON ? , you need to check the power supply your boot fuse box main fuse, or check all fuses in the car, and check the battery charging (Alternator electric system) I hope you fix soon your car , I fingers cross. Merry Christmas.:)
Hello buddy. I ve got a 520i e60 2004 and while driving a small amount of smoke came out from heater vendor and radio and i drive main screen stoped working. Do you have any idea what it would be so i can check it? Thanks in advance
Hi, I wish but I don't have Cristal Ball, 🤪 check water leak in to the boot, next I will check blower motor, but best idea drop the car in to the garage
Wywala też sos oraz czujniki parkowania... ten moduł tez steruje tym wszystkim? I jak 1min stoi z kluczykiem w stacyjce, to pojawia sie ostrzeżenie ze akumlator słaby , a kupiłem nowy i zaprogramowałem
Hey Man my friends and I changed the battery & Alternator on my car ( same year same model 04 530I ) after the battery & Alternator change my screen is like distorted but it still turns on every time. The picture scrambled and distorted, any ideas ? Please help
FixYOURride13 thanks man I remove the carpet there was a lot of water under the passenger side sunroof was leaking I’m still in the process of drying the inside I hope it will solve the problem.
This happened to me, I bought a used MPM from a guy that was parting out his BMW and everything was working fine for a few months but now the radio seems to cut out and the screen resets. Is it possible that the wiring harness is corroded and needs to be cut? The original MPM was completely burnt and i couldn't compare the numbers. Anyone having same issue?
4 the MPM module, that part new on Amazon is $209 smfh... I will b highly pissed if my navigation system still doesnt cut on afterwards smh... did anyone just replaced that & ur system came back on, plz do tell...
hello i would have a problem. a bmw 120 will pop up but not show anything in the display! it is just black. and if the battery light is running, can anyone help me?
Hi, we try but we need more details, you have plugin any code readers? You checked battery charger ? You checked all Fuses?Car is running ? How did this happen? Car is after crash accident ? And any car details ?
not the car was accidentally crashed, unfortunately I wanted it, the first time I started it, and the waves were too weak to come to your heels. the display will pop up but it will not show anything but the cd will spin the cd but will not drop anything. it does not give out just bugs for a couple of minutes until the desktop finishes and starts up. the first screen did not want to pop out either. but now it's time to come up. unfortunately does not allow code reading. but I was sick of getting a par code! but I can not find anything! e18d, unknow fault code, 930C, 930A. I think you can get into the battery. since this lamp is cast. I'm starting to replace an acumulator today. if you are tipped to know what to look for I'll help you out! :) 😄
@@horvathzoltan5940hi,the errors comes from telematics module so if all powers, battery and battery charging is ok you have to go to BMW spacialist for try reprogramming ccc system or quality diagnostics . Good luck.
2004 bmw 645ci and the screen went out. It was working for the first two weeks then went out. Logo comes on and goes black all day ? Easy fix or expensive ? Help anyone ?
@@FixYOURride13 You still criticized BMW for placing such a component in an area where water can seep in. Leaving the trunk open would flood it, but if kept close, would keep the electronics safe.
@@Bruce_T i'd say hes right, the german guy , that is really a bad place to install electronics... Landrovers have same problem with computers mounted low, try crossing Africa with that ...swoosh wet ! stuck... they could have mounted it in the same side panel..why in the boot under the spare where dust and water collects, if a sealing rubber fails ...enough said.. bad design.
So you're saying LOGICALLY it's better to place delicate electronics in THE LOWEST POSSIBLE LOCATION vs above a few inches THE LOWEST POSSIBLE LOCATION?
Sitting in the same identical model bmw with exact same issue! Trunk lid popped open overnight and rain got into trunk a few days later screen went out, same noise under hood same low battery! Thanks a million for making this video and confirming the problem and presenting the solution! Cheers from SC USA!
Update, MPM switched out radio and screen are back Thanks a bunch! The car still won't start could be starter, was hoping this was the culprit for the no start issue also for anyone trying to remove the module you grab the side where the red wires are and push module away from harness. It doesn't unplug like it looks.
@@leeyeager8413 I have the same problem but I've tried what ur saying about removing it but cant get 2 still budge...
@@petewilliams9493 It will come unfastened. There is another video that explained it much better than I can. Inevitably I had it towed to the dealer and 900$ later its good.
@@leeyeager8413 my car running it's just that my navigation system, sos & I dont have no sound...
thx 4 replying ...
May God bless you and your family.
I love your accent ! Thank you for sharing this with us !!!
Polish/English streets language 😂😂😉
Thank you so much. I followed your instructions to stop the buzzing and it went away.👍👍
I was in a car driving behind a toyota prius in westside today and the toyota had this channel name on the back
Maitiu Clarke Hi, This is one of the heroes of our channel, 😜 only one with a low suspension on the islands.
islands?
Maitiu Clarke... it means Ireland, UK :-)
Haha class so this lad is in Galway?
I've a 525i M54 been meaning to move this module, for sure Germany don't get the level of rain we do...
update:
I changed the MPM module & my fuses are gd but my shit still didnt come back on smfh...
so I guess I have 2 hit up a junk yard & get the ccc unit or icu unit to get my ride back right...
thx 4 the vid bro, great report...
Pete Williams same problem. I changed mpm. Still not working. Any guesses? What should i do next
Gurjot Singh have you fixed the problem?having the same problem :(
Fredo Baybee yaa please change ur cd player. It also called ccc unit. I got i from ebay for $65 and then i programed it with my car. Charge $150
Exact sane thing - I just opened up the boot and the base was sopping wet. Is it necessary to replace the loom and MDM or can I wait for it all to dry out ?
all depends wire condition
Hey can the vehicle still operate if the mdm module is disconnected, and will it damage anything if you drive without it connected?
Thank you for making/posting this video
Gutes arbeit!
That s2000 tho 😍
My e60 ccc module sometimes not working after 1 or 2 hours but im doing hard reset and he starts to work. When i start ccc module under 15 20 minutes its work. And sometimes language automaticly change to italiano. Do you help me?
Hi, with out the car it is in possible. Sorry
Learn Italiano!
Hallo from Germany
i would like to make a description of what happened 2 days ago on my bmw e60 545 2004 model. We've had bad weather for three days now. it was snowing and raining. i had my car immobilized for three days. I got up today to start the car but it had probably used up the battery which is brand new.(what the hell) Before this event everything was working fine with no problems whatsoever. I wire up to power my car and then find what you describe. The screen does not work and neither does the radio. Also all the lights came on like abs, esp which before did not come on I had no such problem. do you think that's the problem? The module?
I check the fuse 7,5 but is not broken its ok.....and nothing blow as you showing on your video
Thanks
Greetings
Alex
Habe das gleiche problem hast du das problem schon gefunden?
Put the replacement module behind the passenger side cover in the boot 🤔
Do you need to reprogram a new or used module that you will install on the car?
Hi, no my one was only plug & play with out coding.
FixYOURride13 thank you
Thank you for your video its great. So if this module is no good would that be a reason why my screen and the ccc unit is not working. The ccc unit turns on and off but the screen doesn't. I really appreciate any advice please
Hi, diagnostics, or simply check the module in boot is dry or wet
@@FixYOURride13 so this module could be the reason why my ccc unit is not working.
Vielen Dank für die Informationen
Thank you from the heart 👍
Hey thanks for the video. I am in same situation 2004 BMW 530i trunk was open water went in. MPM burnt smoke was all in the car no power drain though car started and everything works. Changed the module same number but no power to radio. Sos light on. Any help be appreciated.
thanks
Hi, I will be check all Fuses in the boot RH side.
@@FixYOURride13 I did check like you mention 7.5 amp and fuses in the glove compartment. I spoke to someone else they think I fried the radio. MPM needs coding?
@@HassanAli-iz1jq if the MPM was exactly same number no need codding ,remov the radio and CK the power com or not
@@FixYOURride13 OKI will do that. how to tell if MPM is good.
@@HassanAli-iz1jq plugin the tester an CK communication
I always get a kick out of when they put electronics in a "liquid collection" area or like when Ford makes their heater cores higher than the rest of the coolant system so air can get trapped in it.
I have the same problem, but my ? is how do take apart the piece 2 check if the MPM is good or not...
tried pulling it apart but did not detach...
thx 4 this vid, I went & brought a loop from amazon thinking that was the problem & couldn't find where 2 connect it smh...
plz help, also the rain got into my trunk as well...
funny that's how this event is happening 2 everyone the same way....
1th check all Fuses , if all be ok next step must be plug-in the diagnostic.
@@FixYOURride13 thx but how do u take the wires from MPM 2 check if that's good...
I tried different things but still couldn't 2 detach...
@@petewilliams9493 ok... did you have a flooded MPM module?
-you spilled water from him ?
-the connector from the MPM module is corroded?
-The Fuse was blow?
-The Alternator did not charging ?
@@FixYOURride13 I checked the fuses & 2 my surprise, the whole section where the 7.5 fuse is doesn't work literally...
I thought the store sold me bad fuses but when I put the fuses in other slots of the fuse box, they worked but when I put them back over to that side it didn't...
so how do i fix that problem...
thx 4 responding...
@@petewilliams9493 hi, you check the fuses when ignition is ON ? , you need to check the power supply your boot fuse box main fuse, or check all fuses in the car, and check the battery charging (Alternator electric system)
I hope you fix soon your car , I fingers cross. Merry Christmas.:)
Thank you for your help.....
Good job
Hello buddy. I ve got a 520i e60 2004 and while driving a small amount of smoke came out from heater vendor and radio and i drive main screen stoped working. Do you have any idea what it would be so i can check it? Thanks in advance
Hi, I wish but I don't have Cristal Ball, 🤪 check water leak in to the boot, next I will check blower motor, but best idea drop the car in to the garage
@@FixYOURride13 thanks a lot buddy
Hey buddy did you figure out what it was
Good my friend
great diy video!
Thank you!
Dzięki stary zaczne od tego jesli chodzi o screen radio a czy ten moduł odpowiada również za reset km licznika i spalania diesel ???
Wywala też sos oraz czujniki parkowania... ten moduł tez steruje tym wszystkim? I jak 1min stoi z kluczykiem w stacyjce, to pojawia sie ostrzeżenie ze akumlator słaby , a kupiłem nowy i zaprogramowałem
Nice one buddy :-)
Hey Man my friends and I changed the battery & Alternator on my car ( same year same model 04 530I ) after the battery & Alternator change my screen is like distorted but it still turns on every time. The picture scrambled and distorted, any ideas ? Please help
Hi, not simple answers...car must see specialist
i have an 2009 e60 but in place of the MPM there is what is called the SVS (for blutooth computer) where would i find this mpm in mine?
Nick Vernice hi ck boot LH side
hello i have a bmw 525d 2006 board computer works for a few minutes then aches wash do you help me? :)
Hi, yes I can, just drop the car to me :) sorry how?
What should I do ?
Hi I have a 525i bmw with the same problem, under the back seat is wet what can I do
Hi, remove the carpet, found water leak , dry the car, check the MPM modul
FixYOURride13 thanks man I remove the carpet there was a lot of water under the passenger side sunroof was leaking I’m still in the process of drying the inside I hope it will solve the problem.
@@1420eddy Clean the sunroof drains
Does the MPM need to be re coded?
Hi, in my case, no
Thank you
This happened to me, I bought a used MPM from a guy that was parting out his BMW and everything was working fine for a few months but now the radio seems to cut out and the screen resets. Is it possible that the wiring harness is corroded and needs to be cut? The original MPM was completely burnt and i couldn't compare the numbers. Anyone having same issue?
That's possible, double check the connection is free off rust if not better replaced from scrap good writing.
@@FixYOURride13 okay thanks for your respond. It works perfect, but when i start the car it starts to glitch and cut out.
@@AndreC1992 make sure you have the correct MPM
@@AndreC1992 I am having the problem currently.. my screen cuts off and turns Grey, and my radio never turns on. How did you fix this?
@@UncBlunt go under your trunk and see if there’s a puddle of water that got to the mpm module
Whats the proper name of the white box, mines not even there
Hi, check from 2:18 video time.
Hello my friend I have cic I drive e90 2011 I drive controller not working after I jump start car... please do u have any solution please
Hi, check all fusses I hope is only fuse blown ;)
Disconnected the battery it works fine
my MPM exploded! I bought another but the system screen does not work! the screen does not ascend the light! what happened?
Hi, Check all Fuses, and camper new MPM with old MPM numbers be sure is currently.
Why it keeps blowing MP model
Just found a flooded MPM module - BMW are stupid for even putting the module there. (no wonder they lost the war lol)
Hi, Where in Ireland are you based ?
Hi, we are based in Galway
A bit out of the way for me, I am down in Cavan. May I ask if it is the fuse or the malfunctioning MPM which causes the iDrive to fail ? Thanks!!
I'm from cavan have the same issue
@@samikpesta2041 hi, .... popular problem
My screen goes white then go black changed the box under spare tire
Ray Hernandez did it work after u switched it ?
4 the MPM module, that part new on Amazon is $209 smfh...
I will b highly pissed if my navigation system still doesnt cut on afterwards smh...
did anyone just replaced that & ur system came back on, plz do tell...
Good question....
Buena tarde tengo un Bmw e60 530i 2006 el tablero no funciona nada la luces lo limpiaparabrisas el radio nada
hello i would have a problem. a bmw 120 will pop up but not show anything in the display! it is just black. and if the battery light is running, can anyone help me?
Hi, we try but we need more details, you have plugin any code readers? You checked battery charger ? You checked all Fuses?Car is running ? How did this happen? Car is after crash accident ? And any car details ?
not the car was accidentally crashed, unfortunately I wanted it, the first time I started it, and the waves were too weak to come to your heels. the display will pop up but it will not show anything but the cd will spin the cd but will not drop anything. it does not give out just bugs for a couple of minutes until the desktop finishes and starts up. the first screen did not want to pop out either. but now it's time to come up. unfortunately does not allow code reading. but I was sick of getting a par code! but I can not find anything! e18d, unknow fault code, 930C, 930A. I think you can get into the battery. since this lamp is cast. I'm starting to replace an acumulator today. if you are tipped to know what to look for I'll help you out! :) 😄
@@horvathzoltan5940hi,the errors comes from telematics module so if all powers, battery and battery charging is ok you have to go to BMW spacialist for try reprogramming ccc system or quality diagnostics . Good luck.
FixYOURride13 thank you
For bmw. X5?
Hi, sorry any videos with X5
Hi i tried to unplug the mpm but it does not get out. What should i do?
Tnx help me out
5:59 0.2mA? Probably 0.2Amps
archerman87 hi, you're right, language mistake :)
2004 bmw 645ci and the screen went out. It was working for the first two weeks then went out. Logo comes on and goes black all day ? Easy fix or expensive ? Help anyone ?
mr. not important same issue
Here's an idea. Don't leave your trunk open when it's raining. Blaming BMW for designing it in such a way ... pfft
Hi, it was not my car, so I have no idea what happens.
@@FixYOURride13 You still criticized BMW for placing such a component in an area where water can seep in. Leaving the trunk open would flood it, but if kept close, would keep the electronics safe.
@@Bruce_T i'd say hes right, the german guy , that is really a bad place to install electronics... Landrovers have same problem with computers mounted low, try crossing Africa with that ...swoosh wet ! stuck... they could have mounted it in the same side panel..why in the boot under the spare where dust and water collects, if a sealing rubber fails ...enough said.. bad design.
So you're saying LOGICALLY it's better to place delicate electronics in THE LOWEST POSSIBLE LOCATION vs above a few inches THE LOWEST POSSIBLE LOCATION?