I looked all over for a decent explanation on how to remove the cowl... I'm so glad I watched your video first before I started off on my own. The pointers were awesome. Thx for the video!
So this ended up showing me that I don't have the patience for a job like this. BUT I thoroughly enjoyed this video! Gonna be checking back for other videos to help me with my 2019 Nissan Rogue! 👍
After removing the cowl it would have been a good time to cover the openings the biggest for the cabin air filter. I have used hardware cloth and gutter grates securing with self tapping screws or JB Weld putty
You must press a few time onto the short arm at about 4" from the location of the nut - but only after you taken out the nut. Its like pressing onto a fulcrum.
I’m just trying my best to find what the part is called on the sides of the cowl. Can’t find it but my vehicle is out in this Texas heat and it’s a 2015. Those plastic side pieces have crumbled into tiny pieces and need replacing.
Currently trying to get mine off of my car so I don’t have to take the entire air intake off the top of my engine just to replace a thermostat located on the rear of my engine
I looked all over for a decent explanation on how to remove the cowl... I'm so glad I watched your video first before I started off on my own. The pointers were awesome. Thx for the video!
You are the best!!!!! Finally someone who shows in detail how to remove everything 💝
THANK YOU THANK YOU THANK YOU!!!! For 2 days I tried different ways and your way, literally 2 seconds and it popped off. MA'AM YOU ROCK!!!!
Great camera - I could actually see what was going on!
Now I have a better idea of what to do.
Thanks so much for the video! 🤩🤩🤩
Nice I needed this today too! Thank you for making the video.
Your Welcome 💪
Same here
Great job lady, thanks ❤
So this ended up showing me that I don't have the patience for a job like this. BUT I thoroughly enjoyed this video! Gonna be checking back for other videos to help me with my 2019 Nissan Rogue! 👍
Best example on the net 💯
Great vid. Your instructions were on point. Thank you.
After removing the cowl it would have been a good time to cover the openings the biggest for the cabin air filter. I have used hardware cloth and gutter grates securing with self tapping screws or JB Weld putty
You must press a few time onto the short arm at about 4" from the location of the nut - but only after you taken out the nut. Its like pressing onto a fulcrum.
Thanks! Great tips!
Well done video! Very helpful.
Great video, thanks for sharing!
Great Job !
Thanks a Million !
Great video I'm bout to this to my car so thank you...
Good insight on things to help with this job..
Appreciate it you got to the point great video
I enjoyed this video
I’m just trying my best to find what the part is called on the sides of the cowl. Can’t find it but my vehicle is out in this Texas heat and it’s a 2015. Those plastic side pieces have crumbled into tiny pieces and need replacing.
Nice how to vid
Fantastic video
This video helps me allot
How did you get the wiper arm off. I took the nut off and it seems like the arm is pressed on.
You gotta push down (put preasure) on the bladed side and lift on the nut side simultaneously
For what car is this video ????
DAMN good job!
Currently trying to get mine off of my car so I don’t have to take the entire air intake off the top of my engine just to replace a thermostat located on the rear of my engine
Nice shortcut without buying special tools or banging it with a hammer.
thanks
You must peoples know what name of ur car and model
CPR. Dude-thank