XPR-10 10k lb.BENDPAK 2 post lift: REVIEW!!
HTML-код
- Опубликовано: 11 окт 2024
- In todays video I’m giving a review on my XPR-10 2 post 10k lb Bendpak lift! I have had this lift for 6 years and have nothing but good things to say about it. I highly recommend Bendpak products to anyone in the fence about them!
Again, thanks for watching! Don't forget to like, subscribe, and share the video!
Also follow us on Instagram and Facebook!
Instagram: business page(@mccarty.speedandfab)
Facebook: business page (@mccartyspeedfab)
Thanks for the review. I’m vacillating between a 10k & a 12k pound lift. Tim in northern TN
No problem! Thanks for watching! Can’t go wrong with either one but if you are doing a bunch of diesel trucks or vans I would definitely go to the 12k!
The problem is, the heavier the rating of the lift, you need a lot more concrete thickness.
Yup! Always go off the manufacturer recommendations on that!
You're right to be concerned, the arms are rated for 2500 lbs each for 10k lift. Some diesels come very close to capacity for the front arms even though truck is below 10k total weight. Check your rig at a scales just so you know how close you are.
Nice installation and shop.
Bingo! Best to always have more than what you really need to do the job!
Thanks for watching!
Will the arms fit under a normal lower car?
For the most part! Every once in a while I’ll have to take my low pro floor jack and jack one up to get the arms under!