Can You Add Pearl In Base Coat? - Automotive Bodywork And Paint Tips
HTML-код
- Опубликовано: 20 окт 2014
- “Tony, I want to put Pearls and Flakes in my paint, should I just mix them in my base coat? Can I just basically pour pearls or flakes into it, mix it up, and then spray on the car?”
So, can you add pearl in base coat?
Well, if you’re looking to do that metallic pearl-ish look, I really recommend not getting a flat color like the Inferno Red that I show in the video. Instead, why don’t you just pick out a color that’s already a metallic pearl. The thing is, you really don’t want to go mixing pearls and flakes directly to base coat because you’re going to have to put a lot of it in there to get any kind of effect.
And most of the time, it just gets buried in the paint and you can’t really notice it showing in the paint.
If you ask me, the best way to do it is to really go to the paint shop and have them mix it for you - so it’s formulated properly and it’s sure to come out looking like a really nice metallic finish.
But, the other way to do it is to mix in intercoat. You will basically have a clear base coat on top of your base - like a DBC/DBU500. You would mix your pearl or flake in that.
Finally, you can just mix the pearls or flakes in your clear coat. The dangerous part about this option is, if you run it, you will have that pearl/flake run. And even if you sand it out flat and buff it, you’ll still see that run.
So mixing it in clear coat is more for someone that already knows how to paint well and lay the clear on glossy without running it. If you could do that, by all means go ahead and use just a basic clear coat to mix your pearls or flakes. Make sure you watch the video because I show you how it looks like on some clear coat with Gold pearl - Silver flake that has already set.
You can use a metallic base coat or even a flat-color base coat, lay the intercoat or clear coat with pearls or flakes on top of it and get an amazing finish.
Watch the video now because I also include a clip of a pocket bike project that I just did. I laid the clear coat mixed with Gold pearl and Silver flake on top of the Inferno Red. It turned out looking really cool.
I laid on two coats of the clear coat mixed with some Gold pearl and Silver flake and you will see how it changed the Inferno Red color to an awesome Burnt Orange. It started out as a faded, ugly, chipped up, cracked fiberglass pocket bike.
It’s the same clear coat we used on the Harley Davidson Yellow gas tank project.
In a nutshell, you’d want to mix your pearls and flakes in a clear coat or an intercoat base coat. An intercoat base coat is basically just a clear base coat. You first lay your base coat - it could be metallic or flat, then you would mix up your intercoat - a clear base coat WITH any kind of pearls that you want - violet, blue, green, etc…mix it up, spray it on. Give it two coats, 50% overlay. Let it dry, then put two coats of clear on it.
To skip that, you could just put your pearls or flakes right in your clear coat. Spray on two coats of it over your base coat. And you’re done.
Looking For Automotive Painting Tools? ⬇️⬇️⬇️ With Great Deals and Discounts
▶️ Spray Paint Gun (ATOM X Series): www.zoolaa.com/
▶️ Spray Gun Light (GUNBUDD): www.zoolaa.com/products/gunbu...
______________________________________________________________________________
Other content:
➡️Get complete auto body and paint DOMINATION and training here: vip1.learnautobodyandpaint.co...
➡️ The R.A.D.S. Paint Formula Video Training: vip1.learnautobodyandpaint.co...
▶️ Learn How To Make Money With E-Commerce: ecomdomination.tonybrichie.com/
▶️ Learn How To Flip Cars For Profits: howtobuyandsellyourcars.com/
▶️ Discover how to make money with crypto: cryptowaters.com
______________________________________________________________________________
More DIY Auto body Videos to Watch:
🚘 The Basics: Auto Body And Paint Your Car Yourself Without Spending $1,000s: • The Basics: Auto Body ...
🚘 Proven DIY BODYWORK Tricks - Easily Body Work & Paint Your Car at Home! Part 2: • Proven DIY BODYWORK Tr...
🚘How To Spray 2k Filler Primer and Apply Glaze Putty Before Single-Stage PAINT!: • How To Spray 2k Filler...
______________________________________________________________________________
Social Media Links:
🔗 Connect on Facebook for More FREE Updates: / paradicegarage
🔗 Follow me on Twitter for more Project updates: / thetonyrichie
🔗 Instagram: / tonybrichie
______________________________________________________________________________
Special Training Videos and Guides On How To Build Your Wealth With Cryptocurrency:
🪙 Crypto For Beginners - How To Get Started: cryptowaters.com
🪙 Subscribe To My Crypto RUclips Channel: / thetonyrichie 
Авто/Мото
Good stuff. Exactly what I was looking for.
been watching your videos for the longest their are very informative
great information thank you
Really liking the intercoat idea Tony! My stock color is ford grabber blue, but maybe after the base coats, one intercoat that has violet blue pearl would be cool to add some mysterious depth. Then finish up with clear. It would either be insanely awesome or totally suck - either way you've sparked some cool ideas here!
Hi Great Video i am painting a 1960 XK falcon Velvet green i am going to drop some Pearl in to my topcoat before i spray the clear on, would that be ok.
Hey Tony.....great videos on DIY projects. Just one question for you.
If you use intercoat base coat mixed up with Pearl's or metallics, and you get a run or orange peel can you still wet sand it out??? Then apply straight clear coat will the run or orange peel still show up under the clear????
Kool tip I used 3 coats of intercoat and one layer of flakes in the clear and layers of clear now I am recoating with clear
thanks for watching!
Great tips and tricks as usual 💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾..
Appreciate it!! Get your free training on "How To Spray Like a PRO Without Orange Peel, Dry Paint, Nasty Runs & Tiger Striping by Modeling
The 5-Step R.A.D.S. Paint Formula!" www.radspaintformula.com/rads
Can you dilute the pearl and binder with reduced?
Is it possible to spray a pearl clear coat over a raptor liner paint job?
Sweet man
Can pearl be used with Matt clear or it has to be added only in base coat and can clear Gloss be mixed with clear Matt for satin finish or sheen for better durability and better looks? Here in India clear base is not available so is it possible to add a colored base and then mix the pearl in clear gloss for second coat and then add the third coat of matt and gloss mix for the sheen? Really looking forward for that pearl effect in satin or sheen finish...
Plz help how much pearl powder pigment do i add to 29ml of natural paint plz help
How can I dilute binder with pearl?
Nice video, Tony, I just finished doing a Epoxy Carbon Fibre model, and I need to seal the Epoxy with Polyurethane..... Sense the Carbon Fibre is BLACK, can I spray 1 or 2 inter coats of Chameleon Red-Green Pearl Pigment on, then come back with 1 or 2 coat of Polyurethane Clear? I have a smile HVLP gun and very little experience. I'm kinda learn on the fly. Thanks in advance
Why can you buff out a run in intercoat but not clearcoat?
Good tips thanks!
Do I have to take off the filter at the botton of the paint container to spray metalflakes (.008 size)?
I would.
Thank's!
Hey Tony!
I was wondering, is it possible to paint a HD sportster gas tank with a deep red, and then give it 2k clear from a spraycan and the "throw" by hand flakes on it? Could you make a video og how to flake paint a tank with spray cans and flakes by hand? Or will you just recommend visiting a pro painter instead.
Regards
Lasse
Denmark
Well, I am not sure how it would look if you threw flakes on it lol...
thanks for sharing, can you tell us how to recreate mercedes silver with flat base coat and pearls? would be interessting to know how it works without paint shop
Very hard to show you something like this through text. There would have to be some experimentation with shades of colors and pearl.
Hi complete newbie here. Can you use a normal 100lpm spray gun for flake spray painting?
Depends on the type of flake and tip size! grab your free manual and get a lot of information on auto body work and paint: www.learnautobodyandpaint.com/vip-offer/
🥰🥰🥰🥰thank you for the knowledge ❤❤❤❤❤
Hey bro! Check out our R.A.D.S Paint formula training this is a 5 video series that will teach you on "How To Spray Like a PRO! radspaintformula.com/
Hi brother good morning I like your video
Nice work, I wanna know what is nozzle size for spray gun for spraying pearl in clear.
1.4 for spraying mini flakes
I have a problem I’m trying to match the color of my car into my engine and transmission so I went and got single stage ppg concept paint but I wanted to add flakes and pearl but as is a single stage I don’t know if they have high heat clear
Hey Paulo, send us your question through email at ninjasupport@learnautobodyandpaint.com with pictures or video of your project so we can send you a more accurate recommendation on your project!
Question can you add pearls to 2k paint ?
Question. Can I skip a basecoast and INSTEAD use an INTERCOAT over my primer with enough pearls to kind of make my own color.. I use plasti dip pearls, they have so much variety. I would then clear coat it
+Randy Meneses You would still need a basecoat color as pearls are semi transparent you would still see the primer under the pearl
Nice valentino rossi decal!!! 👍🏽👍🏽👍🏽👍🏽
ALL HAIL LORD ROSSI!!! Lol
Can you mix 3 different pearls colors in your intercoat clear ?
Yes of course you can!! Learn more at learnautobodyandpaint.com
One question I have about your comment of putting pearl in your clear coat and the possibility of a run with the pearl in your clear coat and not able to sand out. Wouldn't it be the same possibility with intercoat and having a run it?
Hey Man! You can use a clear coat as a carrier or a clear base coat. They sell certain carriers for certain custom projects but you don’t have to use what they sell. And yes, you can use a clear coat as your second stage, as a carrier to carry pearl, flakes, or candy. The only thing is when you’re using a clear coat and you screw up on that stage, you have to do the paint job over. Like if you ran pearl, flake, or candy during that stage. Hope this helps! Grab more free auto body trainings and videos at www.learnautobodyandpaint.com/
So if I use pearl in the midcoat instead of final clear coat and I get a run in that midcoat are you saying I would have to start all over? What would the fix be for a run in the midcoat?
Tony, I’m a guitar maker and want to have a real over the top finish on a telecaster I made. I don’t know what I’m doing, but here is what I want to do: metallic gold base, gold flake rustoleum rattle can glitter blast, covered in candy apple red duplicolor paintshop, but I would like to have pearl in it. Are there any problems here? I was thinking about adding the pearl in the candy.
Hey man! join my live streams and let's talk more about your questions in painting!
BOSS PAINTER - Learn Auto Body And Paint! I'm sorry, I'm in my 50's and have no idea what a live stream is
Lol! Ok, I know what they are now!
Daddy #53 hi I do a good bit of custom painting on Cars , Motorcycles and many other random things people challenge me with. Here’s my Email address..
Robert.wes@aol.com
Maybe I could help as well
Hey tony
Quick question I want to repaint my 93 Audi S4 . its factory tricoat pearl white but I want the pearl to have more effect in the light and I don't know what Pearl to pick for this . please help
Like I want to have double the pearl effect
Plus the front bumper is going to be CF so what would I do for that .
So, if its an intercoat clearcoat, going over the 1st color, how is it also a basecoat?..(im asking for the confused listeners).
There is a BASE version (DBC500) and you can also use a clear as an intercoat. learn more by here: learnautobodyandpaint.com
@@HowToPaintYourCar gotcha. :)
Loved your video. Me and a buddy of mine are gearing up to paint our cars early this summer. I have a particular look and color I'm going for but it was from ruclips.net/video/utR8dNm5MY0/видео.html for dipping cars. In your professional opinion, can I use their method of with conventional paint and still get the same look they were able to produce?
Dbc dbu-500