@royallclark6331 - Thank you so much for using the “❤️ Thanks” button and sending me $10.00 for coffee money!!! I am so happy that this helped fix your machine!! Thank you again!!
@@amyalbernaz8687…. Hi!! Amy…WHO will send a new machine? “Cs”? Who is that? I can’t get mine to work again after trying everything in all the videos 😭. I JUST WANT SOME COFFEE!!! 🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼
Mine is doing the same thing. Air has gotten sucked into the tube. That’s the reason that you’re seeing condensation in the water reservoir. When you are squeezing the tubes, you’re releasing some of the air. That’s the reason that it works after you move it around.
OMG, worked like a charm! 😮 Literally haven't touched my Keurig in about 2-3 years and searched RUclips for one last chance at making it work before tossing my machine. Followed your EASY directions, step by step, and my machine *magically* was brought back to life. Thank you!!!
I've repaired these for years. Dry coffee will sometimes get blown up into the top check valve (not the one at the bottom of the water tank) eventually plugging it. To keep this from happening, PRESS THE K-CUP DOWN ONTO THE FIRST PEG (using both thumbs), PUNCTURING THE BOTTOM SEAL, and then close the lid to puncture the top. Many K-Cups are slightly pressurized, and dry coffee will blow up and into the check valve if you don't follow my advice. I've seen MANY check valves that are dark brown & plugged with coffee grounds.
Mine was the above (check valve issue) and I don't use it for coffee, only hot water for tea. So, zero K-cups and still it had that issue. It also now growls, and it's only been in use for about 6 months. I had purchased 2 of the same model and saved the second (in original box) for when the first one broke. The first one lasted 5 years without ever having a problem. This one is giving all kinds of problems. Same house, same water, same model. Go figure!
Thank you. You are a genius. Your instructions worked like a charm. However, you did not mention the hell I would catch putting those tiny little screws back in. I am a shaky old lady and I dropped them somewhere in the pot. My shaky little hubby decided to use larger screws and they worked, however, not before dropping a few also. There are several screws floating around somewhere in my Keurig, but darn it, I am drinking my coffee this morning. Thank you.
Glad it helped! But don't worry about replacing those screws. They really don't do anything for you, and likely are only there to ensure the unit stays together while they are shipping it. I am glad you got it working!!!
Lol! I just knocked one off the counter onto the tile. It vanished just long enough for me to say "Come onnnmn!!" out of frustration...and then I found it.
Thanks! I was ready to give up. Tried all the fixes from the other videos. Nothing. Clicked on your video, expecting to hear the same fix again. Pleasantly surprised to see something new- and it worked!
That’s great! Glad it worked for you!! Thank you so much for pressing the “Thanks” button and sending me that coffee money $$$! That was very kind of you!!!
While my issue was even slightly different from yours, your tips for opening the top were invaluable to me! Thank you so much! Just as a side note for anyone with the issue I had, after Apache Ranch opens the top part, there is a clear elbow that goes down to the knife piece that punctures the K-Cup, my issue was that coffee grounds had gotten up into the knife and clogged it. I removed just the end elbow, grabbed a straw that I put over the hole leading to the knife, took a swig of water and forced it into the straw, then I sucked back on that same straw and all the grounds came up into the straw. A bit unconventional but it did the trick, hope this side tip helps someone!
@@ApacheRanch This is what happened to mine too. I just used the tiny screwdriver and lightly pushed down towards the k-cup point and it pushed the grounds out in three repeats while grabbing the grounds from the other side. I set the machine in the sink and washed the whole top after unscrewing the front shield by the k-cup holder. Your post was great it helped me get to where I needed to be.
Wow! Thank you so much for using the “❤️ Thanks” button and sending me $5.00 coffee money!!! I appreciate your generosity and appreciation!! Glad this helped fix your machine!!
All you really have to do is unplug the machine for 5 minutes plug it back in and it resets itself. Every time I clean my machine with vinegar it will not suck water up I tried everything and I thought well why not unplug it and let it sit 5 minutes see if it resets itself. That took care of it problem solved
watched many DIY videos on how to fix - your video was the very first video to show / hear what was going on - until watched this video, wife was already pricing a new machine - can't wait to share with my friend the Keurig you gifted to us 5 years ago - after had to been years before that - is still running like a champ... most excellent tutorial - well documented/detailed. Merry Christmas.
Thank you!!! I was about to trash it when I thought I better check RUclips first. I had to take it a step farther and remove that L-shaped tubing in the front and clean out the coffee grounds and the chunk jamming up the needle that punctures the coffee pod. Not sure if one exploded or was just building up for years. Used a paper clip and small brush for cleaning straws. Good as new - you’re a genius!!! 😅
I have the exact same machine. Tried this and it worked first time. I really appreciate you taking the time to make and share this. Definitely saved me from chunking mine. What an easy fix I had disassembled mine from bottom and found no glaring issues. Didn’t think of this part. Again - thanks!
@@ApacheRanch yeah, the same fix just worked for mine the first time also!! thank you very much as I have the exact same machine. I'm not even gonna put the plastic part back on!! there's no point to it.
Hey...it worked for me. But I couldn't get the top to close after I put the 2 screws back in. So, I just left them out and now it's easier to fix next time. Thanks for you video...u saved me from buying another one...
We have an older K70/ K 75 Platinum brewer. None of the other fixes worked: multiple descales, power resets, and clearing the needles. Your solution worked! Your steps were clear and easy to follow. The quality of the video is perfect. Thank you!! Coffee is brewing faster and the air pump is working normally at the end of the cycle again to clear debris. Thanks!
Did exactly what you so clearly instructed, but I’m still not seeing water coming up through the water tube. I wish I could send you a picture of what I’m seeing. I’ll keep trying. Thanks.
I have a K150 w/water hookup in my office and had the same issue you had with yours. I watched so many videos and heard the same about pulling the water tank out and letting it "reset" and whatnot. I took apart the machine like yours did, and it worked exactly as you said with the same tabs blocking the removal. The K150 is a little bit more tricky as you have to remove the handle to give yourself the clearance to take off the lid. Wiggled around the same tube as shown in your video and it worked. You saved me hours of disassembly and having to talk to my boss about getting a new coffee machine. You are a legend and a life saver. I hope you are still checking these comments and that life has treated you well because this here was absolutely lifesaving! Thanks a million!!!!!!
Legend. I was just about to purchase a new Keurig for my Airbnb and your video saved me 100 bucks. Much appreciated brother for the clarity and brevity of your video.
Thank you for this fix! Between this and needing the paper clip trick done, my Keurig works again!! It's 8 yrs old and going strong! Thank you for this information!!
Thank goodness you had this video up. This fixed a Keurig I was attempting to descale that stopped dispensing. Was about to tell the GF it was time to replace it. Thank you!!
My office "inherited" a "broken" Keurig and this fix absolutely worked. Popped off the cover per the video, squeezed the tubes and valves a few times and for the first time in possibly a year a full cup of hot water flowed through into a cup and I did a little happy dance watching the cup fill. We're going to descale it over the next few days and give it a proper cleaning and it'll be like new and spared from the landfill. (I'll also let people know to puncture the bottom of the k-cup first per the comment below to keep it running smoothly.) Thanks so much for this video!
This video not only help me to get my Keurig pump working again, but it helped me to figure out how to replace the top that someone messed up a while back. Thank goodness I saved that top.
Just bought a Keurig K40 at the Goodwill Store for $8.99. It looked brand new with a extra filter and papers. Even the bottom of the water revivor looks new. When I brought it home it would not pump water into the cup.Saw your video did exactly as you did and now it works perfect. Thanks for the help and a good video😊
ARE YOU KIDDING? It took me SIX minutes to fix mine!!! THANK YOU SO MUCH!!!!! You made my wife happy, so now I’m happy! Tip: Remove the screws with the unit on its side and have tweezers ready to grab them.
Came in clutch AGAIN!! I got a free keurig through work because it wasn’t working. Stumbled across your video and was able to get it brewing. Put it away in storage for a few months and busted it out again. Same issue! Tried a few other things until I remembered this issue. Really pulled through for me TWICE 🙌
Wow! This worked! In addition to the instructions, we also pushed on the little hose that goes into the bigger valve, (working it back and forth just a little bit), and that helped to get it going. You just saved us $150 plus dollars as I was getting ready to order a new one online. Thanks! (We have an older model with three cup sizes)
I just want to say THANK YOU!!!!! My Keurig was doing exactly like yours and your information saved me from doing without till I could afford to purchase another one!!!! As I send this I’m drinking another cup of coffee! Again, THANK YOU!!!!!
one tip that I did but luckily it wasn't a problem.....I put a piece of foil on top of the Kcup holder just in case the little screws fell. Just a precaution that wasn't needed. Thank you for this fix!!!
Like you I was ready to chuck my Keurig into the rubbish bin. . . . Then I found your video. It was clear concise and solved my issue in under 5 minutes. Thank you!
Hello. I'm a female dyi'er and I couldn't bring myself to through mine out as I figured the water wasn't going through. I found your solution and bam! It works great! Definately subscribing! Thank you sooo much Apache!
Add me to the long list of people you've helped with this simple fix. I was about to order a new coffee maker on Amazon when I thought to Google my Keurig problem, and found your video. Your solution worked like a charm! THANK YOU! Had a devil of a time getting those two little screws out, though. I didn't bother to put them back in.😁
Thank you so much. This worked perfectly. I almost bought a new keurig today but didn't. One last search on you tube for an easy fix and your video popped up.
FINALLY! Something went right today. Have been doing DIY projects all day and every one of them was a fail! After descaling my Keurig I was having the same problem, at first I freaked out cuz I added a little baking soda to the vinegar in the reservoir so I thought that wrecked it for good.😮 I was so mad at myself for improvising but then dant da da da… I found my genius knight in shining red armor! How in the hell did you figure that out. You’re crazy amazing!! Not the kinda crazy you talked about in your perfect fix em up vid. THANK YOU a whole heap! New fan, new follower ❤
You must be getting tired of people thanking you, but here's one more. I was about to take the whole machine apart, but I was wise enough to click on your video first. Amazingly easy fix......Thanks!
I Tried to clean the pin and use finger to cover the white pressure valve while brewing, still no water came out. Opening the cover per your instruction, I saw water wasn't flowing to the front when brewing but using your technique of moving and pressing on the soft tubing, water started to flow to the front and dripping normally again. A very informative video with clear instruction. Thanks.
Umm wow! This worked! Like some others in the comments I haven't used the machine for a while. It wouldn't pump this morning when I decided to have some coffee. Well, I opened it up and squeezed the hoses some and now it works. So confused and happy.
Awesome! I just did this for mine that has been in storage for 3 years. Worked like a charm. I had the slightly older model without the 3 cup sizes but basically same internals and it worked for that one too. Did a lot of wiggling and squeezing :) Thanks a ton dude.
So I’m watching countless videos on why our Keurig not pumping and came across your video and I did exactly what you did and low and behold it worked just now! Thank you so much
I know! It’s crazy, but this works for the majority of situations. And further cleaning out that check valve is a good idea for the future. I have a video on that also. Glad it helped.
I spent far too long trying to fix the issue with the tank that you pointed out at the beginning. I followed the steps and the problem was immediately fixed
I have a K-Select that has a slightly different cover for the K-Cup holder assembly. After reading your instructions and seeing the location of the clogged tube, I decided to open and close the cover about five times, to see if I might dislodge the clog. This worked!! Even easier than opening it up. Thanks for the info -- I never would have thought of doing this without your video.
Apache ranch: Thank you, thank you...my wife was ready to buy a new machine but I said let me try this gentlemen's method and voila! It worked. Again thank you!
This is great advice! Worked a treat (paper clip unblocking alone wasn’t enough)! Thank you. The advice from TFSFireman is also very helpful (to pierce bottom of KCup as a separate 1st step to stop coffee grounds being blown into Keurig upper works by pod pressure). Periodic dilute vinegar flush also helpful to breakdown calcium carbonate deposits if you’re in a hard water area. Many thanks again for great advice and great video which fixed our Keurig problem perfectly!
I’ve had my B40 for 10 yrs spitting out at least a dozen coffee a day and when the same problem arises I simply turn the machine off and unplug it for a couple of minutes, it resets it. Over the years I’ve learned to take it apart thanks to videos like yours, much appreciated.
YOU ARE A GENIUS!!! Solved the problem for me, and such an easy fix. I was just about to bite the bullet and buy a new Keurig…saved me a lot of money. Thankyou SO much for sharing this information.
THIS IS THE REAL DEAL!!! I can not say thank you enough. I’ve watched hours of videos and try numerous thing (fill water tank a 1/3 of the way, shake the machine, clean the needle that punctures the pods, etc) ALLL FAILS!! This did the trick!! I can not thank you enough for saving our machine cause I thought it was a motor issue and it was going in the trash. You saved the day!!! All my coworkers are going to be so happy to have their machine back!!!
Fabulous advice! Worked instantly and perfectly! Spent the last 40 minutes doing all of the other fixes - even from the Keurig site! Your advice solved it 100% and it's pumping better than ever! I have one of the original 12 year old units!
This fixed my Cuisinart Keurig SS-700!!! Message said to “descale” but water didn’t come out spout. I also went through a few other RUclips videos, which did not fix the problem. I could hear water was being pumped but it would go back into the reservoir. No water came out where it should. Taking the top off was basically the same on mine as in video. Thank You! Thank You! Thank You!
I want to say THANKS! Your video saved my machine. I appreciate all your tips! I also threw away the screwd even before see your comments about not really needing them. I agree, I think they were there so cover didn’t move during shipping. Thanks again!!
I can't believe it but this actually worked. We have the same older model we use for our trailer and after this winter storage it wouldn't work, same symptom as the video. 2 screws and a good squeeze later and it works!
Thank you! I picked one up for free that the ppl giving it away thought worked but seemed to have a pumping problem. I tried this and now it works! Yay!! I really appreciate you explaining this, it fixed mine!!
Thank you so much for this very helpful video. We are not technically inclined here but we were able to fix it on our first try. Your instructions were extremely clear and thank you for warning us about how to take that little off. Unfortunately I pulled it a little bit too hard and I did break one little clamp but I don’t think it’s going to interfere with the use.I really appreciated that you explained everything so clearly. You saved us a bundle of this morning.
@@ApacheRanchWe are impressed with your prompt response. We are wondering if there is a solution which we could run through the machine periodically to avoid calcium buildup or whatever was clogging the tube. Thank you again. Now we’re curious to see if you have other videos.
@@elainecousineau2404 I have 4 Keurig videos today (this one, fix leaking, clean inlet, clean check valve). I think you might want to see the "clean check valve" video - ruclips.net/video/ScGM6cXBvG8/видео.html
What???!!!! This worked like a charm on my B70 model! I had done the blowing air through the valve in the reservoir tank trick and nothing changed. I was about to give up. Thank you!!!!!!!
why are these machines so flimsy? they are a vital piece to starting one's day. I expect more. Not interested in coffee machine repair as a side gig... Just want something that works. Returning mine for a refund.
Oct 2021, thanks, my friend said fix it and it's yours.. did what you did... Proud owner of the same you shown I been wanting one for years.... Thanks again...
My daughter was about to ditch hers and I was about to buy one. She said I could have hers if I could get it to work. Well, 2 screws and a pinch later I had coffee within an hour of me taking it home. THANK YOU!!
I don't know how RUclips knew our machine just stopped working a few days after a descale and this video pops up as a suggestion just as I was going to leave. I figure what the hell, go outside to the garbage pop the cover off give the hose and valve a few squeezes and BAM we got hot water flowing again. Thank you Apache Ranch not only am I liking this video I am Subscribing and checking out what else you have in the vault. OH. The only thing I did differently was I didn't place the cover back on during the testing so if it wasn't working at first than I could squeeze it while it was running and not wait to take it all apart. Thank you for this DIY fix.
Not technically inclined but want my coffee. Tried your instructions and danced all over the kitchen when it worked!! Then I ran descale cleaning before I enjoyed my coffee. Thank you SO much.
Thank you, My Keurig was sitting in the closet for a few years when I took it out to use I had the same problem you demonstrated and was able to fix it following your instructions. Thought I would have to buy a new one. This was a simple fix that actually worked.
Thank you for the fix tip. Haven’t use my Keurig in four or five months, went to use it today and it wouldn’t make any coffee. Found your video and did what you said and I have nice hot coffee. Thank you sir sir.
My model Keurig is one of the k elites. Following your instruction, I couldn’t completely remove the top because there was a ribbon that I didn’t want to mess with but I was able to see, wiggle and jiggle the waterline, which did fix my problem! Thank you!
Wow... I have tried everything and was ready to toss out my Keurig. I followed your instructions and its working great now. Thank you so much for posting this....
Our Keurig suddenly stopped working this morning but when I went through the steps on this video it completely fix the problem and now it actually works way better than it did before! Thank you so much for making this video. It was very helpful! 😊💗👏🏼
Great Video....This is awesome. I was getting ready to trash my Keurig when I ran across your video. It solved my problem the first time. Easy to follow instruction. Saved me $200. Thanks for sharing.
Your video should be top listed!! Yours was the 3rd video I watched and it worked!! Totally fixed it. Now I will have coffee for tomorrow morning! Thanks!
After all the simple fixes for this type of problem didn't work, I tried yours. Although I have a different model, your suggestion was the one that fixed my problem. Thanks so much.
My thanks, it worked. I actually disconnected the hose on the downstream side of the check valve and lifted it up so I could "massage" it real good. I think the O-Ring may have lost its seal and by "flexing" it, it flows great now! Thanks again for sharing.
I just about killed my Keurig by not descaling it for way too long. Before I watched Your video, it wouldn't work at all, but this trick helped get it to a working state, although undependable at first, I was able eventually able to run enough Vinegar through it to get it to work better and better, and now it really runs great. If I hadn't seen this video, it would have been thrown in the trash thinking the pump was worn out. Thanks so much
Thank you so much for this, I was able to get my machine working again. For those of you with different models that don't have the screws, its still the same thing. Only thing is there are pegs. GENTLY push them back and up so they get past the black base and then carry on with the rest of the steps to get the top off. Super easy, no losing screws, and you just go backwards to replace the top. Just be GENTLE.
Thanks! You saved me $120.00 bucks today. Least I can do is pass some of the savings onto you!!
@royallclark6331 - Thank you so much for using the “❤️ Thanks” button and sending me $10.00 for coffee money!!! I am so happy that this helped fix your machine!! Thank you again!!
Thanks so much for this! Machine working like a charm again.
To register the coffee maker Cs will just send you brand new machine lol $0!!!!
@@amyalbernaz8687…. Hi!!
Amy…WHO will send a new machine? “Cs”? Who is that? I can’t get mine to work again after trying everything in all the videos 😭.
I JUST WANT SOME COFFEE!!! 🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼
I run a tank with water and vinegar once a year to prevent calcium build up.
Not only was this my fix, but the quality of your tutorial was excellent.
Thanks for your comment!! Glad that it helped!!!
Hell yeah! Knew this was gonna be good when you allowed us an opportunity to hear the exact same problem Im having.
Mine is doing the same thing. Air has gotten sucked into the tube. That’s the reason that you’re seeing condensation in the water reservoir. When you are squeezing the tubes, you’re releasing some of the air. That’s the reason that it works after you move it around.
OMG, worked like a charm! 😮 Literally haven't touched my Keurig in about 2-3 years and searched RUclips for one last chance at making it work before tossing my machine. Followed your EASY directions, step by step, and my machine *magically* was brought back to life. Thank you!!!
So glad it helped!!
Register it online then call customer service and they will
Ship you a BRAND NEW MACHINE!!!!
I've repaired these for years. Dry coffee will sometimes get blown up into the top check valve (not the one at the bottom of the water tank) eventually plugging it. To keep this from happening, PRESS THE K-CUP DOWN ONTO THE FIRST PEG (using both thumbs), PUNCTURING THE BOTTOM SEAL, and then close the lid to puncture the top. Many K-Cups are slightly pressurized, and dry coffee will blow up and into the check valve if you don't follow my advice. I've seen MANY check valves that are dark brown & plugged with coffee grounds.
GREAT information!!!!! Many thanks!!!
Mine was the above (check valve issue) and I don't use it for coffee, only hot water for tea. So, zero K-cups and still it had that issue. It also now growls, and it's only been in use for about 6 months. I had purchased 2 of the same model and saved the second (in original box) for when the first one broke. The first one lasted 5 years without ever having a problem. This one is giving all kinds of problems. Same house, same water, same model. Go figure!
Worked. Thanks for the details demonstration and explanation.
Glad it helped!!!
Can the check valve be replaced on it's own? I may be tearing into our Keurig here shortly, and am hoping I dont need to replace that valve.
You saved so many people's coffee maker. Let me buy you one! Thank you so much.
Wow thanks! I sincerely appreciate you buying me a coffee! Glad it helped! Thanks for clicking the Thanks button!!
This was nice, I want to do the same.
@@QueenButtercup Wow! Thank you so much! I am so appreciative of your thank-you gift! I’m glad this helped with your machine!
dummy me... im thinking... he cant buy a Keurig for 5 bucks.
@@bigted1953 Haha, yeah. I meant to buy him a coffee.
Thank you. You are a genius. Your instructions worked like a charm. However, you did not mention the hell I would catch putting those tiny little screws back in. I am a shaky old lady and I dropped them somewhere in the pot. My shaky little hubby decided to use larger screws and they worked, however, not before dropping a few also. There are several screws floating around somewhere in my Keurig, but darn it, I am drinking my coffee this morning. Thank you.
Glad it helped! But don't worry about replacing those screws. They really don't do anything for you, and likely are only there to ensure the unit stays together while they are shipping it. I am glad you got it working!!!
Lol! I just knocked one off the counter onto the tile. It vanished just long enough for me to say "Come onnnmn!!" out of frustration...and then I found it.
I had to use tweezers to hold those pesky devils. A second set of hands to hold the unit stable helps too.
same here
Magnetic screwdriver
It’s rare to actually see the solution to a problem I have after only a couple of videos. Thanks a bunch.
@@TehFreaky1 great! Glad it helped!!
Thanks! I was ready to give up. Tried all the fixes from the other videos. Nothing. Clicked on your video, expecting to hear the same fix again. Pleasantly surprised to see something new- and it worked!
That’s great! Glad it worked for you!! Thank you so much for pressing the “Thanks” button and sending me that coffee money $$$! That was very kind of you!!!
While my issue was even slightly different from yours, your tips for opening the top were invaluable to me! Thank you so much!
Just as a side note for anyone with the issue I had, after Apache Ranch opens the top part, there is a clear elbow that goes down to the knife piece that punctures the K-Cup, my issue was that coffee grounds had gotten up into the knife and clogged it. I removed just the end elbow, grabbed a straw that I put over the hole leading to the knife, took a swig of water and forced it into the straw, then I sucked back on that same straw and all the grounds came up into the straw. A bit unconventional but it did the trick, hope this side tip helps someone!
That’s a great point! Thanks for explaining how you fixed yours!
@@ApacheRanch This is what happened to mine too. I just used the tiny screwdriver and lightly pushed down towards the k-cup point and it pushed the grounds out in three repeats while grabbing the grounds from the other side. I set the machine in the sink and washed the whole top after unscrewing the front shield by the k-cup holder. Your post was great it helped me get to where I needed to be.
Thank you for that tip!
This fixed my problem! Thank you SO much.
Be sure to press down cup with thumbs. And seat it on the bottom knife, before closing lid.
I can't believe this actually worked 😂 thanks!
Very happy for you! Glad it helped!
You're video saved us money on buying a new machine. Here you go. Thanks!
Wow! Thank you so much for using the “❤️ Thanks” button and sending me $5.00 coffee money!!! I appreciate your generosity and appreciation!! Glad this helped fix your machine!!
All you really have to do is unplug the machine for 5 minutes plug it back in and it resets itself. Every time I clean my machine with vinegar it will not suck water up I tried everything and I thought well why not unplug it and let it sit 5 minutes see if it resets itself. That took care of it problem solved
I have unplugged it as well, but still no results, looks like I will be buying a new one
watched many DIY videos on how to fix - your video was the very first video to show / hear what was going on - until watched this video, wife was already pricing a new machine - can't wait to share with my friend the Keurig you gifted to us 5 years ago - after had to been years before that - is still running like a champ... most excellent tutorial - well documented/detailed. Merry Christmas.
@@tonytbd6232 Merry Christmas!!
Thank you!!! I was about to trash it when I thought I better check RUclips first. I had to take it a step farther and remove that L-shaped tubing in the front and clean out the coffee grounds and the chunk jamming up the needle that punctures the coffee pod. Not sure if one exploded or was just building up for years. Used a paper clip and small brush for cleaning straws. Good as new - you’re a genius!!! 😅
Glad it helped!!
I have the exact same machine. Tried this and it worked first time. I really appreciate you taking the time to make and share this. Definitely saved me from chunking mine. What an easy fix I had disassembled mine from bottom and found no glaring issues. Didn’t think of this part. Again - thanks!
Thanks for your comment! I’m glad it worked for you!
@@ApacheRanch yeah, the same fix just worked for mine the first time also!! thank you very much as I have the exact same machine. I'm not even gonna put the plastic part back on!! there's no point to it.
Well easy enough to slide it in without the screws. The screws really don’t do much good anyhow. Very glad it worked for you!
Hey...it worked for me. But I couldn't get the top to close after I put the 2 screws back in. So, I just left them out and now it's easier to fix next time. Thanks for you video...u saved me from buying another one...
That’s great to hear!!
We have an older K70/ K 75 Platinum brewer. None of the other fixes worked: multiple descales, power resets, and clearing the needles. Your solution worked! Your steps were clear and easy to follow. The quality of the video is perfect. Thank you!! Coffee is brewing faster and the air pump is working normally at the end of the cycle again to clear debris. Thanks!
Very happy to hear this!!
Did exactly what you so clearly instructed, but I’m still not seeing water coming up through the water tube. I wish I could send you a picture of what I’m seeing. I’ll keep trying. Thanks.
I have a K150 w/water hookup in my office and had the same issue you had with yours. I watched so many videos and heard the same about pulling the water tank out and letting it "reset" and whatnot. I took apart the machine like yours did, and it worked exactly as you said with the same tabs blocking the removal. The K150 is a little bit more tricky as you have to remove the handle to give yourself the clearance to take off the lid. Wiggled around the same tube as shown in your video and it worked. You saved me hours of disassembly and having to talk to my boss about getting a new coffee machine. You are a legend and a life saver. I hope you are still checking these comments and that life has treated you well because this here was absolutely lifesaving! Thanks a million!!!!!!
Hey, I’m so happy to hear this! Very happy it worked for you. Thanks so much for letting me know!!
Legend. I was just about to purchase a new Keurig for my Airbnb and your video saved me 100 bucks. Much appreciated brother for the clarity and brevity of your video.
Glad it helped !!!
Thank you for this fix! Between this and needing the paper clip trick done, my Keurig works again!! It's 8 yrs old and going strong! Thank you for this information!!
Great!! Glad it’s still working now!! And thank you so much for your very kind $5 gift!! I really appreciate your thoughtfulness!!
@@ApacheRanch you are very welcome! You deserve it for how much you've helped folks over the years! I wish I could had given you more. God bless! 💜🙏
Yay…it worked! Easy to understand video. I did it myself and I am a 68 yr. old female. Thanks!!
That’s just great! Thanks for letting me know! Glad it helped!
Lol, iam 66 and was happy too. This worked for me too
Thank goodness you had this video up. This fixed a Keurig I was attempting to descale that stopped dispensing. Was about to tell the GF it was time to replace it.
Thank you!!
My office "inherited" a "broken" Keurig and this fix absolutely worked. Popped off the cover per the video, squeezed the tubes and valves a few times and for the first time in possibly a year a full cup of hot water flowed through into a cup and I did a little happy dance watching the cup fill. We're going to descale it over the next few days and give it a proper cleaning and it'll be like new and spared from the landfill. (I'll also let people know to puncture the bottom of the k-cup first per the comment below to keep it running smoothly.) Thanks so much for this video!
Great! I’m so glad this worked out for you and you saved it from the landfill. Thanks for your comment.
This video not only help me to get my Keurig pump working again, but it helped me to figure out how to replace the top that someone messed up a while back. Thank goodness I saved that top.
Glad this helped you!!
Just bought a Keurig K40 at the Goodwill Store for $8.99. It looked brand new with a extra filter and papers. Even the bottom of the water revivor looks new. When I brought it home it would not pump water into the cup.Saw your video did exactly as you did and now it works perfect. Thanks for the help and a good video😊
That’s great!!!
ARE YOU KIDDING? It took me SIX minutes to fix mine!!! THANK YOU SO MUCH!!!!! You made my wife happy, so now I’m happy!
Tip: Remove the screws with the unit on its side and have tweezers ready to grab them.
Great tip! Glad it helped you!
WOW I've literally spent the last hour watching so many videos trying to solve the problem and this worked like magic!!! Thank you so much!
Yeah it's nuts how something so small could actually block that check valve and stop the entire machine from working. Glad it helped!!!
Thanks for posting! This totally worked for me, too!! 😁
So glad it worked! Thank you so much for sending me the $10 Super Thanks!!! Very kind of you!!
Came in clutch AGAIN!! I got a free keurig through work because it wasn’t working. Stumbled across your video and was able to get it brewing. Put it away in storage for a few months and busted it out again. Same issue! Tried a few other things until I remembered this issue. Really pulled through for me TWICE 🙌
Sweet! That’s great that it helped you! Thanks for your comment!!
Thanks! You saved my Keurig😅
I am so glad that it helped! Thank you so much for your generosity.
Wow! This worked! In addition to the instructions, we also pushed on the little hose that goes into the bigger valve, (working it back and forth just a little bit), and that helped to get it going. You just saved us $150 plus dollars as I was getting ready to order a new one online. Thanks! (We have an older model with three cup sizes)
That’s awesome!!! Glad it worked for you!!! Thanks for your comment!
I just want to say THANK YOU!!!!! My Keurig was doing exactly like yours and your information saved me from doing without till I could afford to purchase another one!!!! As I send this I’m drinking another cup of coffee! Again, THANK YOU!!!!!
Glad to help!
one tip that I did but luckily it wasn't a problem.....I put a piece of foil on top of the Kcup holder just in case the little screws fell. Just a precaution that wasn't needed. Thank you for this fix!!!
Good point!
Like you I was ready to chuck my Keurig into the rubbish bin. . . . Then I found your video. It was clear concise and solved my issue in under 5 minutes. Thank you!
Glad it worked! Such an easy fix!
Very clear. Thoughtful concerning capturing on camera with angles etc. Very good instructional video. Thanks for uploading
Glad it helped!!!
Agreed
Thank you!
Hello. I'm a female dyi'er and I couldn't bring myself to through mine out as I figured the water wasn't going through. I found your solution and bam! It works great! Definately subscribing! Thank you sooo much Apache!
Great! Glad you fixed it!!
Just did this in my office and it worked right away. Nice troubleshooting man!
Awesome! Glad it worked! Thanks for your comment.
Add me to the long list of people you've helped with this simple fix. I was about to order a new coffee maker on Amazon when I thought to Google my Keurig problem, and found your video. Your solution worked like a charm! THANK YOU! Had a devil of a time getting those two little screws out, though. I didn't bother to put them back in.😁
@@richlovett6949 great! Glad you saved it!
Thank you so much. This worked perfectly. I almost bought a new keurig today but didn't.
One last search on you tube for an easy fix and your video popped up.
That’s great!!!
Me too!! I looked yesterday but they were out of the one I wanted. Then…. THIS!! GENIUS!! Thank you so much!!
Oh that’s great! Glad you saved your machine!
FINALLY! Something went right today. Have been doing DIY projects all day and every one of them was a fail! After descaling my Keurig I was having the same problem, at first I freaked out cuz I added a little baking soda to the vinegar in the reservoir so I thought that wrecked it for good.😮 I was so mad at myself for improvising but then dant da da da…
I found my genius knight in shining red armor!
How in the hell did you figure that out. You’re crazy amazing!! Not the kinda crazy you talked about in your perfect
fix em up vid. THANK YOU a whole heap! New fan, new follower ❤
Well I’m glad it made your day a little better. Good job fixing it!
You must be getting tired of people thanking you, but here's one more. I was about to take the whole machine apart, but I was wise enough to click on your video first. Amazingly easy fix......Thanks!
Actually it’s really great to hear all the responses and thank you messages! I’m glad it worked for you!!
I Tried to clean the pin and use finger to cover the white pressure valve while brewing, still no water came out. Opening the cover per your instruction, I saw water wasn't flowing to the front when brewing but using your technique of moving and pressing on the soft tubing, water started to flow to the front and dripping normally again. A very informative video with clear instruction. Thanks.
Glad it worked for you!!!
Umm wow! This worked! Like some others in the comments I haven't used the machine for a while. It wouldn't pump this morning when I decided to have some coffee. Well, I opened it up and squeezed the hoses some and now it works. So confused and happy.
Awesome! I just did this for mine that has been in storage for 3 years. Worked like a charm. I had the slightly older model without the 3 cup sizes but basically same internals and it worked for that one too. Did a lot of wiggling and squeezing :) Thanks a ton dude.
Hey that’s great! Glad it worked for you and you saved that old machine!
So I’m watching countless videos on why our Keurig not pumping and came across your video and I did exactly what you did and low and behold it worked just now! Thank you so much
I know! It’s crazy, but this works for the majority of situations. And further cleaning out that check valve is a good idea for the future. I have a video on that also. Glad it helped.
My husband came back with coffee and I said : it’s fixed 😂
I spent far too long trying to fix the issue with the tank that you pointed out at the beginning. I followed the steps and the problem was immediately fixed
That is great! So glad to hear that!
Same - 2 minutes to fix. After trying everything else :-)
Awesome
I have a K-Select that has a slightly different cover for the K-Cup holder assembly. After reading your instructions and seeing the location of the clogged tube, I decided to open and close the cover about five times, to see if I might dislodge the clog. This worked!! Even easier than opening it up. Thanks for the info -- I never would have thought of doing this without your video.
Great! Glad it worked!!
I have added this to favourites, its the best instructions I ever seen on youtube
Wow! Thank you so much for the compliment. I really appreciate it.
Apache ranch: Thank you, thank you...my wife was ready to buy a new machine but I said let me try this gentlemen's method and voila! It worked. Again thank you!
Hey that’s great to hear! Now go buy a nice dinner instead!
This is great advice! Worked a treat (paper clip unblocking alone wasn’t enough)! Thank you.
The advice from TFSFireman is also very helpful (to pierce bottom of KCup as a separate 1st step to stop coffee grounds being blown into Keurig upper works by pod pressure).
Periodic dilute vinegar flush also helpful to breakdown calcium carbonate deposits if you’re in a hard water area.
Many thanks again for great advice and great video which fixed our Keurig problem perfectly!
Excellent!
Thank you, a huge help and we are back making coffee again.
Great! Glad it helped you!!!
BINGO, U NAILED IT!
Thank you so much…Super helpful as the Descaling and vinegar fixes did not work for me at all.
Great to hear!!!
I’ve had my B40 for 10 yrs spitting out at least a dozen coffee a day and when the same problem arises I simply turn the machine off and unplug it for a couple of minutes, it resets it. Over the years I’ve learned to take it apart thanks to videos like yours, much appreciated.
I was just about to throw mine away & then I came across this! Problem solved 🙂 Thank you kindly sir!
Glad to help! And glad to save another one from the trash! Thanks for your comment!
YOU ARE A GENIUS!!! Solved the problem for me, and such an easy fix. I was just about to bite the bullet and buy a new Keurig…saved me a lot of money. Thankyou SO much for sharing this information.
You are very welcome! Glad it helped!!
Thank you so much! This is my trailer Keurig....it worked like a charm!!
So glad it helped!!!!
@@ApacheRanch Just had to do it again......so glad I saved this video!!!!
THIS IS THE REAL DEAL!!! I can not say thank you enough. I’ve watched hours of videos and try numerous thing (fill water tank a 1/3 of the way, shake the machine, clean the needle that punctures the pods, etc) ALLL FAILS!! This did the trick!! I can not thank you enough for saving our machine cause I thought it was a motor issue and it was going in the trash. You saved the day!!! All my coworkers are going to be so happy to have their machine back!!!
Wow that is great to hear! Thanks for letting me know and I am glad it helped you!!!
Followed your exact instructions and solved the issue. Wow. Thank you for sharing your expertise, it feels great to repair stuff. Thanks again!
Glad it helped you!!!
After looking up various videos, I had no luck and thought this was going to the dump. NOPE! Your method worked! Thank you for posting and sharing.
@@smileymonkey10 glad you saved it!!!
This worked perfectly, thank you!! I also tried the water reservoir method first and it didn't work
Happy it worked!
Thanks! You fixed my Kuerig!
Thank you so much for hitting the “❤️Thanks” button and buying me a coffee!!! I really appreciate it!!! Happy New Year!!!
This is the second time this has happened and this is exactly what it takes to fix it! Thanks!
Great!!! Thanks for letting me know!!
Fabulous advice! Worked instantly and perfectly! Spent the last 40 minutes doing all of the other fixes - even from the Keurig site! Your advice solved it 100% and it's pumping better than ever! I have one of the original 12 year old units!
That’s awesome! Glad it helped!!!
Great video!! This fixed my problem without having to rip the whole thing apart.
THANK YOU
So glad to hear that! Happy that it worked for you!!!
Wow....it worked. Thank you very much
Thanks so much
Great!!! I am glad it helped you!!!
Dude! I've gutted these machines without getting them fixed. I had no idea the top would come off. This took me ten minutes! Thanks for sharing, man.
That’s great to hear! Congrats!!!
Can I say I’m mad I’ve been trying to fix my Keurig for over a month and this actually worked? 😭😢😅
You found the fix that works!!! Glad you fixed it!!
This fixed my Cuisinart Keurig SS-700!!! Message said to “descale” but water didn’t come out spout. I also went through a few other RUclips videos, which did not fix the problem. I could hear water was being pumped but it would go back into the reservoir. No water came out where it should. Taking the top off was basically the same on mine as in video. Thank You! Thank You! Thank You!
Well that is great to hear! Glad you saved yours!
Thank you so much! This just worked on mine as well. Great instructions also!!
Thanks for the comment! Glad it worked!
I want to say THANKS! Your video saved my machine. I appreciate all your tips! I also threw away the screwd even before see your comments about not really needing them. I agree, I think they were there so cover didn’t move during shipping. Thanks again!!
Great to hear!
I can't believe it but this actually worked. We have the same older model we use for our trailer and after this winter storage it wouldn't work, same symptom as the video.
2 screws and a good squeeze later and it works!
That’s great!!! I’m really glad it helped you!!
Thank you! I picked one up for free that the ppl giving it away thought worked but seemed to have a pumping problem. I tried this and now it works! Yay!! I really appreciate you explaining this, it fixed mine!!
That’s great! I’m glad to see it worked for you!!
Descale your Keurig! Easy Using just Vinegar! - ruclips.net/video/y_VqM2he7-A/видео.html
Upgrade your Keurig Machine with these new options:
* Keurig K-Supreme Coffee Maker 66oz - amzn.to/2QyYhWh
* Keurig K-Classic K-50 Coffee Maker 6-10oz - amzn.to/3rkhOq7
* Keurig K-Slim Coffee Maker 8-12oz - amzn.to/3tTTmxz
Thank you so much for this very helpful video. We are not technically inclined here but we were able to fix it on our first try. Your instructions were extremely clear and thank you for warning us about how to take that little off. Unfortunately I pulled it a little bit too hard and I did break one little clamp but I don’t think it’s going to interfere with the use.I really appreciated that you explained everything so clearly. You saved us a bundle of this morning.
@@elainecousineau2404 That's great to hear! Glad this helped you fix your machine!
@@ApacheRanchWe are impressed with your prompt response. We are wondering if there is a solution which we could run through the machine periodically to avoid calcium buildup or whatever was clogging the tube. Thank you again. Now we’re curious to see if you have other videos.
@@elainecousineau2404 I have 4 Keurig videos today (this one, fix leaking, clean inlet, clean check valve). I think you might want to see the "clean check valve" video - ruclips.net/video/ScGM6cXBvG8/видео.html
@@ApacheRanch Thank you so much. My husband is 82 and I’m 76 so we’re thrilled to be able to do this. You’re the best
What???!!!! This worked like a charm on my B70 model! I had done the blowing air through the valve in the reservoir tank trick and nothing changed. I was about to give up. Thank you!!!!!!!
That’s great! I’m glad it is helpd. Thanks for the comment
why are these machines so flimsy? they are a vital piece to starting one's day. I expect more. Not interested in coffee machine repair as a side gig... Just want something that works. Returning mine for a refund.
Do this FIRST! I tried everything. This did the trick! Thank you very much for making the video! Almost gave up. Thank you!
Another machine saved from the trash dump! Thanks for letting me know!!
I have the exact same Keurig as you. Nothing worked until I watched your video, and like a charm, your solution worked! Thanks. Thumbs up.
Awesome!
Oct 2021, thanks, my friend said fix it and it's yours.. did what you did... Proud owner of the same you shown I been wanting one for years.... Thanks again...
That’s a pretty good deal!!! Very happy that it worked for you. Thanks for your comment.
My daughter was about to ditch hers and I was about to buy one. She said I could have hers if I could get it to work. Well, 2 screws and a pinch later I had coffee within an hour of me taking it home. THANK YOU!!
Sweet deal!!!
Thanks for a simple, direct explanation of the fix. Wish everyone followed your video technique! Was very helpful.
@@nickdalessandro1191 thanks!!!
I don't know how RUclips knew our machine just stopped working a few days after a descale and this video pops up as a suggestion just as I was going to leave.
I figure what the hell, go outside to the garbage pop the cover off give the hose and valve a few squeezes and BAM we got hot water flowing again. Thank you Apache Ranch not only am I liking this video I am Subscribing and checking out what else you have in the vault.
OH. The only thing I did differently was I didn't place the cover back on during the testing so if it wasn't working at first than I could squeeze it while it was running and not wait to take it all apart. Thank you for this DIY fix.
Great! Glad you saved yours from the trash!
Not technically inclined but want my coffee. Tried your instructions and danced all over the kitchen when it worked!! Then I ran descale cleaning before I enjoyed my coffee. Thank you SO much.
That’s great!!!
Thank you, My Keurig was sitting in the closet for a few years when I took it out to use I had the same problem you demonstrated and was able to fix it following your instructions. Thought I would have to buy a new one. This was a simple fix that actually worked.
Glad you saved it!
Thank you for the fix tip. Haven’t use my Keurig in four or five months, went to use it today and it wouldn’t make any coffee. Found your video and did what you said and I have nice hot coffee. Thank you sir sir.
Glad it helped!!!!
My model Keurig is one of the k elites. Following your instruction, I couldn’t completely remove the top because there was a ribbon that I didn’t want to mess with but I was able to see, wiggle and jiggle the waterline, which did fix my problem! Thank you!
Great! Glad it helped and that you fixed yours!
Wow... I have tried everything and was ready to toss out my Keurig. I followed your instructions and its working great now. Thank you so much for posting this....
I’m so glad it helped you out!!
I just want to congratulate you I was going to throw the pot away, but it really really worked I’m sooo happy. Thank you😄😄😄
Glad it helped! Very nice to hear that!
I just fixed my coffee maker using your suggestions. It worked perfectly. Thank you very much . I love RUclips!!!!!!!
Hey that’s great!! So happy to hear this! Thanks for your comment!
I was ready to order a new Keurig until I found this video. Worked like a charm. Now I'm having my morning cup of coffee as usual. Thank you SO MUCH!
Our Keurig suddenly stopped working this morning but when I went through the steps on this video it completely fix the problem and now it actually works way better than it did before! Thank you so much for making this video. It was very helpful! 😊💗👏🏼
You are very welcome! Glad you got your coffee back!
Sir, you are my HERO!!! This worked on the first try! Thank you SO much for sharing this tutorial!!
Glad it helped!!
YOU ARE AAAAAMMNAZINNNNG!!!!!!!
I was going to go buy a new Keurig but I decided to look up at RUclips. And I found your video. So happy!!!
That’s great to hear!!
Great Video....This is awesome. I was getting ready to trash my Keurig when I ran across your video. It solved my problem the first time. Easy to follow instruction. Saved me $200. Thanks for sharing.
I am happy this video helped!
I was trying solutions for a couple hours before I stumbled upon this video. Worked like a charm and saved me from buying a new one! 🤩
Glad to hear that!!!
This is why RUclips exists. Thank you sir.
Your video should be top listed!! Yours was the 3rd video I watched and it worked!! Totally fixed it. Now I will have coffee for tomorrow morning! Thanks!
Wow - thanks for your comment! Glad it worked for you!!!
Just tried this on mine and worked! I barely felt like I squeezed the tube and now I have water coming out. Thanks so much!!!
I know right? It's crazy. The smallest particle of hard water or other debris can clog it up! Thanks for your comment!
@@ApacheRanch thank you for posting!
After all the simple fixes for this type of problem didn't work, I tried yours. Although I have a different model, your suggestion was the one that fixed my problem. Thanks so much.
Great to hear! Am very happy that it worked for you!!
You just helped me here when I was about to put it in the trash. Had this one for 10 years I think. Great fix!
@@rciorcia glad it worked!!!
My thanks, it worked. I actually disconnected the hose on the downstream side of the check valve and lifted it up so I could "massage" it real good. I think the O-Ring may have lost its seal and by "flexing" it, it flows great now! Thanks again for sharing.
Glad it helped!
I just about killed my Keurig by not descaling it for way too long. Before I watched Your video, it wouldn't work at all, but this trick helped get it to a working state, although undependable at first, I was able eventually able to run enough Vinegar through it to get it to work better and better, and now it really runs great. If I hadn't seen this video, it would have been thrown in the trash thinking the pump was worn out. Thanks so much
So glad it helped!!
Thank you so much for this, I was able to get my machine working again. For those of you with different models that don't have the screws, its still the same thing. Only thing is there are pegs. GENTLY push them back and up so they get past the black base and then carry on with the rest of the steps to get the top off. Super easy, no losing screws, and you just go backwards to replace the top. Just be GENTLE.
Thanks for sharing that!