New Stihl MS462 "stage 1" ported for a quick test to check how the saw responds to some mods. Yes, I was super throttle happy that day, only for testing for sure :D
I was running this saw for about 2 hours at about a 30-50% duty cycle ruclips.net/user/postUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and it did a great job. I used the lever for the built in sharpener to clear chip buildup out more than to actually sharpen the chain. It managed to cut some hardwood stumps much larger than it's size without bothering the neighbors with hours of 2 stroke noise.
Dechsi87 I can see that. How much did you advance the timing? I just opened up a 462 and smoothed out the exhaust port and opened up the muffler. Was thinking of removing the base gasket but hadn’t seen anyone do it yet. Easy enough to do though if it improves things a little.
how durable ist this thing? by that i mean, how long can it take full on forestry abuse, before some internal stuff goes wrong? any of that occcuring during use?
That's a sweet saw time will tell how it holds up i suppose. But i bet it will be like most of the rest of the family hard wearing. Thanks for showing what its like now I want one ...lol. That 325 chain is for experienced users only...on a saw like that for sure.
Right now, i'm super impressed by the 462. The saw is light as my 560xp, but with 72ccm power. Even stock with 6hp by 6kg, it is hard to beat at the moment.
supperterofsanity only someone that doesn't cut firewood would use 16 instead of 24. Run that thing all day lol lol. My 372s and 460 do the same thing with a 16 in bar which has no business on it by the way.
@Dechsi87 I was serious. I’m located in Denmark and can easily ship my saw to Germany. How much do you charge for a port job like this ? You can contact me at kimschlebaum@yahoo.dk
you prolly dont care but if you are stoned like me atm then you can watch pretty much all of the new series on Instaflixxer. Been binge watching with my brother for the last days :)
325 chain makes the whole test pointless. Same with that short bar. Probably rips stock with that setup. Put a 28” or 32” and burry it. That’s where gains can be seen.
Yes it rips stock with that setup, it was only for testing to check out if the saw runs right or not after my changes! I don't use 28" for such small wood, i have another videos with the 462 and bigger bars, this was only for personal testing, check out the thread on OPE.
@@steppoffaith8426 It was only for TESTING!!! Not to see any gains, why should i use a bigger bar in that small kind of wood? It was fun to use the light 462 with a big 9pin rim to cut my firewood, nothing more. I have enough other videos on my channel with bigger bars on the 462.
Dechsi87 Sorry... In some countries MS 462 is sold with and without M-troning feature. I'm not so familiar with the M-troning carbs, but hitting a Rev limiter on a 2stroke is not a good idea. Maybe the software can't catch up with the modifications that you did to the saw.
No problem! ;) It was only for short testing. In my experience, the mtronic copes very well with the porting. The saw runs now for weeks fully ported and daily by a professionel logger. Personally I would love to have non-m-tronic saw! It gives me more options.
I was running this saw for about 2 hours at about a 30-50% duty cycle ruclips.net/user/postUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and it did a great job. I used the lever for the built in sharpener to clear chip buildup out more than to actually sharpen the chain. It managed to cut some hardwood stumps much larger than it's size without bothering the neighbors with hours of 2 stroke noise.
I can’t get enough of this! It cuts like a laser and sounds like a really pissed off hornet. Bad ass!
I just came back to watch this video again. I love the saw. Listen to that thing hit the rev limiter!
that thing is increadable! how many degrees did you advance the timing?
462.💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪👍👌👍👌👍👌👍👌👍👌👍👌👍👌👍👌👍👌👍👌👍👌👍👌👍👌👍👌!!!!!!!!!!!!!!!!!!👌👌👌👌
That things running good I want to get one now
You need one. Can't wait to see that video.
You n me both
I am so jealous . I'm awaiting the 462 here in the U.S.
Good work,nice strong saw with sharp chain.
Thanks!
I'm a stihl fan for many years, i have more than fourteen stihl equipment. Next purchase will be ms 462.
LOVING THAT BEAST! WHAT A TOY,, SO, SO. SMOOTH,,, THATS BEAUTY,,,, Nice,,, play away,,
What do you suppose the power gains are after porting? 40% more power? That thing is scary powerful! Please do a port job on a 572 xp and film it!
Brutal!!! 👍👏
Dammit. Now i want one 😀
Simon Nejst is most evil!
Stihl💪
Look how far it's throwing those chips
What kind of wood but it rocks even with longer bar in big wood good job
Big saw small chain!
and it works perfect with the 9pin in that kind of smaller wood 😉
Dechsi87 I can see that. How much did you advance the timing? I just opened up a 462 and smoothed out the exhaust port and opened up the muffler. Was thinking of removing the base gasket but hadn’t seen anyone do it yet. Easy enough to do though if it improves things a little.
That is insane...nice job!!!
how durable ist this thing? by that i mean, how long can it take full on forestry abuse, before some internal stuff goes wrong? any of that occcuring during use?
Need to try it on some Aussie hard wood
Man, that thing rips!
That's a sweet saw time will tell how it holds up i suppose. But i bet it will be like most of the rest of the family hard wearing. Thanks for showing what its like now I want one ...lol. That 325 chain is for experienced users only...on a saw like that for sure.
Right now, i'm super impressed by the 462. The saw is light as my 560xp, but with 72ccm power. Even stock with 6hp by 6kg, it is hard to beat at the moment.
stihl is the best
You rigth!
Of course it runs good. It’s a .325 chain for one and it’s a 15 inch bar. What the hell do y’all expect
Nothing but fun :D and better than stock
Hi. Nice Content! 462 vs 572xp. Which saw would you prefer ?
Nimmst du auch auftrage an oder portest du nur fuer dich selbst ? Beinflusst porten eigentlich die lebensdauer oder saege ?
What kind of oil do you use for mix?
What is that a 16 in bar should do good put a 28 on it try again?
No problem ;) but why in this small kind of wood?
He had a 24 on it also.
Dechsi87 why 70cc with 16 in bar lol. why 70 cc saw is the question. Every 70 cc saw will cut just as good lol.
supperterofsanity only someone that doesn't cut firewood would use 16 instead of 24. Run that thing all day lol lol. My 372s and 460 do the same thing with a 16 in bar which has no business on it by the way.
Hey man, can tou show us how tou sharp your chains? Thankssa! Its so good 🙂
How much du you charge for a portjob on a 462? And where are you located :-) thanks
this.....
@Dechsi87 I was serious. I’m located in Denmark and can easily ship my saw to Germany. How much do you charge for a port job like this ?
You can contact me at kimschlebaum@yahoo.dk
kimschlebaum t hff at saws not much more that stock lol.
@@steppoffaith8426 Im positive that the sav isnt stock. I ovn 4 of those 462´s and im a professionel
Najjača mašina stihl 462
Hey bro, would you be so kind and point me in the right direction on how to do a muffler mod properly for this one? I'm over in Australia. Thanks
Alex Swan check out on OPE Forum, thread "Inside the 462" 😉
Dechsi87 Thanks legend, will do! Cheers PS: I love the 462!!! Picked it up yesterday and I’m blown away. Yew
Dechsi87 just found the picture, awesome. Just wondering if you modified the exit port of the muffler as well or removed the screen? Thanks so much.
Dechsi87 Stupid question... I have worked it. Haha All good. Will have a crack at doing this mod. Cheers 👍🏻
Hey mate, muffler mod was easy enough. All you need is a dremel with a good carbide bit to get through the stainless steel. Most awesome saw hey!
dude does that have a turbo?!
Great video! I have a question if you don't mind... Where did you get those cool aggressive looking dogs / spikes on the Stihl saws? I like those.
phi376 custom made, laser cutted ;)
Dechsi87 I am jealous! Nice set!
What’d she do after stage 2? Light saber on meth pipe hits?
Not a namebrand 70cc that won't cut right with it with 16 in bar.
yes, for sure
Şu ara ses mükemmel. stihl alman harikasi
That setup rips
What is meant by the term transfer ports “leveled”?
you prolly dont care but if you are stoned like me atm then you can watch pretty much all of the new series on Instaflixxer. Been binge watching with my brother for the last days :)
@Koa Alijah Yup, been watching on instaflixxer for months myself :D
It is like a hot knife in butter
Stihl bravo 👍👍👍👏👏👏
325 chain makes the whole test pointless. Same with that short bar. Probably rips stock with that setup. Put a 28” or 32” and burry it. That’s where gains can be seen.
Yes it rips stock with that setup, it was only for testing to check out if the saw runs right or not after my changes! I don't use 28" for such small wood, i have another videos with the 462 and bigger bars, this was only for personal testing, check out the thread on OPE.
Saw Greater thank you sir lol.
Dechsi87 I got ms290 that cut right with it 18" bar.
@@steppoffaith8426 It was only for TESTING!!! Not to see any gains, why should i use a bigger bar in that small kind of wood? It was fun to use the light 462 with a big 9pin rim to cut my firewood, nothing more. I have enough other videos on my channel with bigger bars on the 462.
Dechsi87 it would be fun to run for sure.
Stihl zegt dat uw 24 bar zwaard alleen geschikt is voor stihl ms 441 460 en 660
NOT ms 462 🤷🏼♂️
Raar waar zaagt u mee dan??
Like a hot knife through butter ha nice
Geht ganz gut 😉
ı just came back
how much to you charge to port a husky 390
what oil do you use and how ratio?
daniheres mostly aspen premixed alcylate two stroke fuel with a tad more oil added (stihl ultra) 1:40
What's that a 16in bar
hello any link for chain?
Too much fun in cutting. The painful hauling part gets too big with that saw. Run a -261 in all factory settings.
really? 6kg isn't to much for an allround saw
Dechsi87 , lol. What I tried to say is that with such an efficient saw, there will be a LOT of trees to haul to the truck / transport out of the wood.
haha, ok that's true :D now I understand it ;)
Dechsi87 👍🏽😂
How much mony.?
That is fast
haulin!
Is that rev limiter at 3:57. I think that its better to enrich it a little.
Konstantin Dimov it's an Mtronic saw 😉
Dechsi87 Sorry... In some countries MS 462 is sold with and without M-troning feature. I'm not so familiar with the M-troning carbs, but hitting a Rev limiter on a 2stroke is not a good idea. Maybe the software can't catch up with the modifications that you did to the saw.
No problem! ;) It was only for short testing. In my experience, the mtronic copes very well with the porting. The saw runs now for weeks fully ported and daily by a professionel logger. Personally I would love to have non-m-tronic saw! It gives me more options.
HELL any MS462 with ONLY a 15" bar will cut REALLY FAST !!!!!!!!!!!!!
So fast, 👍
RPM?
👋 👍💗
Шина 37 см?
Look how fricken short his bar is!!
was enough for that piece of wood
18' Bar
You tubo the chainsaw 😉😉
Mi. Montre es. Patricio. Yo. También. Trabajo. Con motosierra