MS500i vs MS462 vs 572xp vs PS7910 (all stock)
HTML-код
- Опубликовано: 13 авг 2019
- The new fuel injected (first ever) MS500i has some impressive stats on paper, 6.8hp/5kw with 79.2cc by only 6.2kg/13.6lbs powerhead weight. A lightweight powerhouse! I wanted to see how the saw keeps up against some comparable contenders. (Also, check out my test against some ported saw's. ) Now it's finally time to squeeze a bit more out of the 500i ;)
Fairest test I have ever seen. You are consistent. Well done.
thanks!
@@Dechsi87 I agree. Best test on RUclips by far. Great technique and very consistent.
Nice to see someone warm their tools up first for once
Warm up is at least 40-60 seconds. To each there own. Jim Tree
When the cooling fins are too hot for my finger its warm!
Absolutely. Although I usually let them warm up for a minute or so, especially when it’s cold. Just like to have everything get up to temp before working my tools hard. A minute is no time at all and falls into the whole “ounce of prevention” deal.
Ain't that the truth.
I was running this saw for about 2 hours at about a 30-50% duty cycle ruclips.net/user/postUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and it did a great job. I used the lever for the built in sharpener to clear chip buildup out more than to actually sharpen the chain. It managed to cut some hardwood stumps much larger than it's size without bothering the neighbors with hours of 2 stroke noise.
Great video, well edited, no talking trash, good camera angles and the wording was clear and concise. Top quality right there.
I'll subscribe if all your videos are this good. I already did. Thank you, nice saw pants too. Jim Tree
Nice review! I like how you look after your equipment by warming it up properly. Too many pl just come start and rev the crap out of them. Uber you get many years of reliable service from your gear.
Well deserved likes and views on this one. While other reviews rave about how great the 500i is due to being newest, FI, etc. we have a real test here. Not one word spoken or unnecessary fluff, just straight up test and results. It really does help some of us answer the question, "what is [best] for me?"
It's not about the fuel but how good the oil is Stihl runs the best
0.2 seconds is nothing and if this man did the test again the results could've been inverted.
500i is great but so is the 462... Why there has to be a "great winner" and the rest have to be "crappy losers"? I cant understand
Stihl ms462 impressive saw,husky 390 ported is a huge favourite of mine ,also had my ms 460 ported and did that saw do some work.still in my shed ,sold all the other saws.when I was younger hang of a husky 3120 for years ,unbelievable.good review.
Ï
572 19sec $900 70c ,500i 80cc 18sec $1500,462 77cc 17.9 sec $1100
He’s back! Awesome shoot out aaaand 462 for da win, of course!! 💪🏻
I have the 462 and in my opinion it's the best saw on the planet.
Do you also have the ms500i?
I bought a new 462c this spring. Nice and lightweight for the power and cutting ability.. wins hands down... getting stronger the more I use it
@@migm7428 Better than 500i and 562 husky?
@@jacobfurnish7450 a bit more light than ms 500 for the dame use, much more light and compact than 572 XP.
High revving no torque.
I just bought 2-462's and they are screamers with super low weight. Until they get the weight down on the 500I the 462's will get the nod. A 1/2 lb. heavier for the 500I but try lugging that extra 1/2 lb. around all day bucking limbing logs through the brush. It does make a difference.
Very good comparison.
I bought the ms 462 cm, it is an absolute beast. I work with it often and nearly every day definitely a keeper
I love mine!! Ported by stump shot wi
That 390 was on a mission! Nice!
Klasse Video und ein toller Vergleich zwischen den Sägen.
Ich überlege mir gerade eine Säge in der Klasse zu kaufen.
Grüße aus dem Ruhrgebiet
Niko
The last Husky is a freakin beast !!!!!
Trim saws such as a 201 top handle Stihl, the 261, 362, are good better than husky but once you get into the big 80cc and above husqvarnas fuel response makes them better.
That was are great comparison video TY!!!!!!!!!!!
That 461 stihl and big 390 husq cleared the area!!!!
Very much appreciated, thank you.
The best simple comparison I've seen, bravo!
Just one small point, to eliminate doubt set camera to avoid loss of sight of the chain and bar for some changes.
sincerely
david
Nice Job 👍🏻
Awesome great video chain made my day.
Danke für das Video überlege zwischen 7900 und 462. Konnte dem günstigen Kurs bisher standhalten und werde wohl bei stihl bleiben 👍
The 390 husq really cleared the area.
390vs 661 dann werden wir mehr wissen
Immer Äpfel mit Äpfel vergleichen nie mit birnen
Aber der eigentliche Geheimtipp is doch nach diesem Video die 461
It better, it's 88cc - lol.
Weight is king when working, given reliability is there. Who cares about tenth's of a second. Stay safe out there
Actually power and knowing what sharp saw means is the king.
@@austindenotter19
Laws of nature rule and govern all things in a dynamically interactive manner. So, weight, power, reliability, chain sharpness, etc all combine in causality. Ya all already know this.
Sir that 390 is a beast
Good that the same bar and chain was used on each saw used!
That smaller Husqvarna 572 impressed me.. Strong contender when ported 👍
I bought one in the spring. Love it still. A second doesn't bug me much. It was half the price of the 500.
Ms 460 king my favorite
What’s a freakin saw collection you got all the best saws
Super tare clipu....imi place ...
Einfach tolle Sägen... Jedes mal, wenn ich das Video wieder anschaue beneide ich dich um jede Einzelne! :-)
Cool video!
Awesome video!!!!! I would love to see these times with muffler mods also
461 My favourite saw on the planet.
Great to see a ported version destroy the 500i.
The 462 and that last Husky.
I was speechless 🤔
"Destroy"? really? 0.2 seconds? Both Stihl models are fantastic machines
You're excited to see a ported saw beat a stock saw that's basically in the same class - lol.
Excelent video!
Would be nice now to put same amount of fuel in each one and count the cuts :)
But im waiting for husqvarna with injection
Great video I'd love to see a 395xp video.
Do you guys switch bars and chains like this or ea saw have its own???
Nice job showing us. I'm hoping some hotshot crew starts using the 500i when they become available in the States so we can get an idea of durability.
Was apart of the crew in sitgreaves, AZ. A long time ago. The old O models still hold their own, but are heavy as crap. Be safe.
Jim Hubbell I had one in my hand this past Friday. It’s heavy ish, but its a freakin beast. People say it feel like the 462. I can’t confirm that, because I have never used a 462. Yet ;) All I know its a beast!
2002 carried a 460 with 32” bar up and down that mtn, Navajo ihc 2002 that 500i is looking good
372 xp 04 and under has the durability . . same as a stihl . . 04 and under. . . new models cant handle the heat. . .
do you have any data on durability of 500i?
I am thinking og getting 2 of those, but they are mighty expensive and I dont want to make a mistake. I use chainsaws to cut firewood, like 15m3 of beech cut each day to lenght of 33cm. So that is a heavy use.
Great vid thanks😀😀
Great video.
Парень молодец , все четко и понятно без лишних слов , лайк.
all good saws :)
Totally
✝️🇺🇸👍 thanks for the video god bless and stay safe
Man that thing is a beast. My 461 can't keep up !!!
great video 10/10. Who did the port job on the 461 and the 390 ? thanks
It was me ;)
Nice job. Do you port saws for costumers ? I have a new 390 I would like to get woodsported. If you’re interested -> kimschlebaum@yahoo.dk
@@kimschlebaum did you get your saw worked on?
Rather than show the ported saw's I would have like to have seen the stock saw have three cuts in succesion and see an average. We are human and I doubt we run the saw the same every time, we are talking 1.2 seconds difference between the three fastest which is pretty hard to see in real life. Very good vid. Apparently the 390 is a salty dog, I wonder how my 394 would stack up with the same length bar and step up the sprocket a notch?
Stihl ms 462 cm is really good chainsaw
Nice‼
Good afternoon, or maybe evening.
In your opinion, which model of chainsaws is the best and most reliable between two brands Stihl - Husqvarna.
Thank you.
Great comparison. Would have loved to see 3 cuts and a new chain or sharpen each time. Otherwise great job. Thank you!! In the end they are all great saws! The 462 surprised me over 500. Knew they were close, but expected 500 to barely win. Still debating on either a 462 or 572 for my next saw.
462 is the best saw in the known universe, peroid. Nuff said
Awesome comparison. How long will the ported saws last for an every day logger? Great to see them all running and what times they all did.
Its not a problem. Keep the mix and mixture right and they will last well. Once you use a ported saw you don't go back to stock saws the difference is huge.
Ported saws are noisy - but run just as long as they run a lot cooler.
Would you recommend the tsumura bar? I’ve been looking at buying that exact bar for my 362.
I'm running a 28 on my ms 661 month old now 3 days a week solid work haven't buried up yet I'm very impressed and happy with it
Yes I will highly recommend it!! about $45-$80 depending on how big.
The best Stihl! 💪 👌👌 😘
Cool video. I still vote the 500i because it has more torque and can handle a 32” bar like the 462 with a 28” bar
Is that a 24 or 28inch bar buddy?
Nice :)
👍 çok başarılı teşekkürler
Nice Steph. That 390 is a weapon!
Legendary saws... hard to accept that these saws are gone in europe...
@@Dechsi87 Yes. So many saws went to the guillotine within the last couple of years. Sad to see.
Cc to cc ported pretty sure stihl takes it
@@Dechsi87 We can still buy them in Belgium, but with some ridiculous prices
Loved this video, was leaning towards a MS462 C-M anyway because I still love to be able to maintenance the saw and I feel the electronically controlled carbs are proven by now on Stihl. The new fuel injection sounds amazing but I just don’t feel like being that close to the bleeding edge of technology before it’s had a few years of manufacturing to prove they didn’t have design problems.
They’ve had it in their concrete saws for many years
The 461s are a hard saw to beat
Is a echo 680 in this class?
Hallo,
ich hatte dir Mal bei Facebook geschrieben (sonstige). Wie hoch ist der Aufwand die 462 zu Porten, auch preislich. Und was für Leistungssteigerungen erreicht man, wenn man berücksichtigt, dass die Säge weiterhin täglich laufen soll.
Schau nach hotsaws101. Der baut jede Sage um zu verschiedenen starken.
How much time is on each saw? The 7910 time is totally out to lunch they are not that slow carb adjusted what air filter is on it? never have seen a 7910 get beat so badly like that before. How about 3 cuts each? If the 462 beats the 500i what is the point? Thank you for that, can you revisit this competition?
Those last 2 started to remind me of that zombie series 28 days later
Greetings from Dolmartown- Hamburg/Germany
Do you port for hire?
nicely done!
What do you think? The 500i i thought should be quicker than the 462, makes me wonder why I would bother upgrading? Maybe after 10 tanks of fuel it will losen up a bit?
By all accounts and comparisons i have seen, even after a lengthy break in period, the 462 is faster. There is another vid of both professionally ported with aftermarket carbs and the 462 still beats it.
I've had my ms441cm for 10+ years and it's been flawless. It's only had a muffler model done to it,but I cant see the fuel injected saw have any real advantages over the mtronic saws as far as reliability, so unless theres significant fuel savings I'll stick with carburetors. My only complaint about my 441 is the weight, but that's probably got more to do with my aging than it does the saw
where is the dolmar saw from
What are you going to do do with those pucks?
I run a ported 460 for felling and a stock 460 for bucking the hot saw is a beast I bet it would put up a 14 sec number
Nice👍
I log everyday with these Saws all Stock Stihl is my Favorite but I sure wish they had the Husqvarna Gas& oil caps
ported Dolmars are no joke when you let them breathe, may be the fastest saw in your comparison. nice work on the vid
Yes. For the ones that know, Dolmar comes heavily restricted on breathing.It even has a metalic piece that restrict the cylinder!!! Take just this out and you have a different saw. Also its muffler is heavily restricted.Fix these two issues and then make comparison. You will find it impossible to beat the Dolmar-Makita on the same cc.
@@giannistsoukatos4205what metallic piece are you talking about? Just curious cause I have a makita 7900. Thanks
Saw are good it depends on the sharpest chain
462cm stihl is a masterpiece to me and I dont own 1 stihl.
Yup. A pretty impressive machine and even a step fwd in terms of power-to-weight ratio. Makes it somewhat desirable
Ever notice nobody ever puts a Poulan Wild Thing in these competitions? Just think about that for a minute🤔 There’s only one true king💪🏼
Its been banned. Steroids.
My old pioneer partner 5000 plus can still do this!
What were the stats on that stihl That won? Didnt think you had the rpms up on the dolmar! I'm a husky guy but I'm pretty sure that dolmar shoulda walked all over them
agree
Dolmar comes heavily restricted from factory. A ported Dolmar against a ported anything on same cc will bury them.Huge difference.
Lol you brand fanboys are hilarious🤦🏽♂️
Gotta love the EPA..
I have a 500i. Absolute beast.
140psi Good compresion 372xp oem?
Where'd you get those saw dogs on the 461?
Great video.
custom made, laser cutted ;)
500i great saw, but what you think about durability?
Listerr looks promising , the tests I’ve seen they run the saw with zero maintenance and were instructed to abuse them... just oil and fuel and let her rip
Time will tell.
The 462 🔥
I have the 661, but I've been looking at getting myself a 500i or 462. I might get both...
What is the weight difference between 572xp and 390xp? must be small?
572 way smaller and lighter than 390.
Молодец, всегда смотрю твои видосики, все просто и интересно, удачи.
The 462’s are game changer for stihl never mind the 500i that sounds like an oleomac.
That stock dolmar 7910 seemed slow, yet that 462 was faster🤔? Kinda strange, How much run time is on them?
500i has 6-8 tanks. The Dolmar was about a year in use. The 462 is from 2018. In my other video the ported 7900 and the 681 spanked the 500i
@@Dechsi87 I guess you would expect that, but can you do any work to the 500i? Will you be limited by electronics? Didn't think a stock 462 was that much faster than 7910, not from what I've seen on here(youtube)🤔. What about a stock 7900?
Ill second that this seems to be the weakest 7910 I've seen. I'm not saying it should run faster than the 500i, 572, or 462, but every other one I've seen will at least run WITH them. The only thing I took from it is that the chain actually looked kinda tight on the 7910 at the end of the video, maybe it wasn't oiling quite right?
Q marca de espadin es?
I thought that ported 461 was fast but Holy Cow... That ported 390 came in at 13.4. That's Ripping!
Jxhddhdh'etty7e0000so
It better be at 88cc
I’m a Stihl fan 100%
Great video but I don't think it will ever make it as a logging saw due to how complicated it would be to have to rebuild. I've not tried any of the new stihls but I know my 460 mag will never get replaced.
What's so complicated about rebuilding it ?
A question. When did a Stihl bar start fitting a husky?
I did not ;) but you can use an adapter to make it fit 😉
What makes a saw cut to one side or the other? Any ideas? Thank you
Dull teeth or not right Raker height
Your sharpening the chain unevenly.
Also your bar might be worn more on one sided. Just needs to be ground straight again. That's the most likely.
The old 390 compare to the new oncec is a difference i can see but for just a hobby and wood for own use 60 cc is enought for me i think but have some of u here exsperiance with husky 359? And an awsome video greate work
The nicest thing about the 462 its like holding air how long it will last is another question .
Year 3 on my 572 logging.
140 psi is good compression for 372xp 2003?
Thats awesome but not uncommon