Although not in English, I was able to follow the steps in the video and reset the DPS6 transmission adaptations on my 2014 Ford Focus. Great video and thank you for making it. Please make some of your videos in English. You will get more likes and I am sure more subscribers.
Salut merci pour la vidéo si j'ai bien compris autel maxipro gère tout la programmation ? Le nouveau tcm est venu avec des informations oubien il vient vierge merci j'attends la réponse
Hi, thank you for sharing this experience. I now have one from the junkyard and I have a question. Thank you for responding in advance. - Does the transmission fluid start to drain out from these two holes when you pull the TCM from the transmission? I am going to drain the transmission fluid prior to attempting this replacement if it's the case.
Thanks, oil will not drain though this two hole. Better you remove the drain plug close to CV axel. Am not sure the size. Remove there and you can refill from the breather hole, slowly put oil so you will not get messy.
Sir mac pede magtanong san naakabili ng tcm? ang case naman po ng akin parang napansin ko pg tumatakbo na po ng mga 1km or 2kms nagccheck engine tapos hinde na pumapasok sa 3rd gear at reverse. Pero pag napahinga or lumamig na ulet mga 30mins o 45mins papasok na ulet 3rd gear pero once uminit ulet wala nanamn 3rd gear at reverse. Sana mapansin mo message ko sir
Hola amigo. Felicitaciones por ti explicación. Me puedes dar el modelo exacto del escáner? Qué número de Maxi pro? Puede reprogramar TCM Ford sin la licencia Ford?
Kapapalit lang po ng tcm and oss sensor, di pa nga 200km natakbo, nasa 3km pa lang ng ginamit ko ulit pag start ayaw na mag reverse and drive then ayaw na mag start, after ma mga ilang oras pina start and gumana na ulit tumakbo na ulit ng mga 2km, then hindo ulit and palamig ng ilang oras saka naman sya gagana, ano kaya problema mga sir? Thank you
@@Macgarage08 sir magkano pa program sa inyo? Gawa kasi nung fiesta ko pinalitan na ng forkshift at lamng loob. Tapos na linis na din. Pero pag tumatakbo bigla nalang namamatay po. Tapos mawawala na drive at reverse.
Sir chat tayo sa messenger kasi gusto ko sana malaman if gumagawa din kayo ng ganun or may kakilala kayong marunong regarding sa problem ng ford fiesta 2012 automatic ko
Pag not moving pag linagay mo sa drive or reverse, and pag pina rest mo ng ilang oras gagana na naman, then after makatakbo ng saglit, balik problema na naman biglang hihinto and di na namn gagana drive and reverse.
@@Macgarage08 ganon din ang issue ng ford fiesta ko pag tumakbo ng mga 3km lalabas na Yong transmission hot wait 5min. Iilaw na din transmission sa dashboard
yeah bro I change whole transmission of ford ecosport 2015 but after that I try to reprograming with my autel maxisys ms906 pro but can’t successful can you help me to fix that issue
@@Macgarage08salut pour la programmation du tcm avez vous utilisez otre appareil pour le clonage, oubien c'est avec maxipro vous avez tous géré merci pour la vidéo
Hello I got ford focus 2012, I have problem with my transmission sometimes the reverse not working, sometimes R D N showing on car board, I have took the car to server shop it shows this code p0606. The told me u need to change TCM. Can your help what exactly the best TCM for my car and how to install the software? Thank and if you have whatup give me ur number? Thank you
Although not in English, I was able to follow the steps in the video and reset the DPS6 transmission adaptations on my 2014 Ford Focus. Great video and thank you for making it. Please make some of your videos in English. You will get more likes and I am sure more subscribers.
Thank you ❤️
Salut merci pour la vidéo si j'ai bien compris autel maxipro gère tout la programmation ? Le nouveau tcm est venu avec des informations oubien il vient vierge merci j'attends la réponse
Ayos na master hehe swabe na ulit yang ford mo,👍👍
Thank you so much for share knowledge. Love you from Cambodia❤️
thanks for tuning in 💕
Lupit Ganda NG Obd MO idol Mac.
Hi, thank you for sharing this experience. I now have one from the junkyard and I have a question. Thank you for responding in advance.
- Does the transmission fluid start to drain out from these two holes when you pull the TCM from the transmission? I am going to drain the transmission fluid prior to attempting this replacement if it's the case.
Thanks, oil will not drain though this two hole. Better you remove the drain plug close to CV axel. Am not sure the size. Remove there and you can refill from the breather hole, slowly put oil so you will not get messy.
When doing adaptive learning on tcm everything passrs besides one that says gear select failed any ideas on what it could be?
Why isn't there a video for a 2008 Ford Focus for the TCM removal and installation
ayus nanaman, ganda ng obd mo mac.
yung obd nayan pwede my bleeding ng break boss mac?
Do I follow all these steps to program a new tcm on my Ford focus?
Yes you must. Otherwise you cannot run the car.
Sir mac pede magtanong san naakabili ng tcm? ang case naman po ng akin parang napansin ko pg tumatakbo na po ng mga 1km or 2kms nagccheck engine tapos hinde na pumapasok sa 3rd gear at reverse. Pero pag napahinga or lumamig na ulet mga 30mins o 45mins papasok na ulet 3rd gear pero once uminit ulet wala nanamn 3rd gear at reverse.
Sana mapansin mo message ko sir
Which model is the Autel? There’s different MP808 models
This is MP808. There is another MP808BT
Hola amigo. Felicitaciones por ti explicación.
Me puedes dar el modelo exacto del escáner? Qué número de Maxi pro?
Puede reprogramar TCM Ford sin la licencia Ford?
I try to understand bro, I understand small since i am filipino.
May scanner is maxipro MP808 this maxi pro can program all of vehicle. Thanks
Sir mac pede po ba sa inyo magpskabit at pareprogram ng tcm ng eco sport ang case ay mataas ung idling nya taas baba ung anadar tsnx po
Hi sir, good pm saan po location nyo.
Nag basic check naba kayo check nyo po air filter nyo baka madumi lang and trottle body need cleaning.
Or baka po may shop po kayo na mairekmenda sir
Magkano po abutin ng gastos, kc ganyan din po problem ng ford focus hatchback S 2.0, wala po reverse tas mahina sa drive
Nasa 45k po ata gastos kasamana parts
Sir good day Po. Saan nyo po nabili autel maxipro
Nabili ko po sir sa ebay.
boss pag hindi nagpalit ng TCM pero na remove sa pwesto nya,kailangan pdin ba reset,sir
Yes po.
Hello how do you take the bottom connector off the tcm?
Hi, the same as the top connector. But you need to remove first the TCM itself to have better space. Or you can remove it under the car. Hope it helps
Hi , May i ask that my product cannot be used after I bought it, the dealer said that the TCM is bad, do you know what the problem is?🤔
Sorry I didn't get your point. the TCM that you brought from dealer them is bad? Or the the car itself has a problem on TCM?
Kapapalit lang po ng tcm and oss sensor, di pa nga 200km natakbo, nasa 3km pa lang ng ginamit ko ulit pag start ayaw na mag reverse and drive then ayaw na mag start, after ma mga ilang oras pina start and gumana na ulit tumakbo na ulit ng mga 2km, then hindo ulit and palamig ng ilang oras saka naman sya gagana, ano kaya problema mga sir? Thank you
Original TCM ba Ang pinalita sir? Kasi Yan issue nayan pag hindi orig TCM Ang pinalit.
@@Macgarage08 sa kasa sir ginawa
Sir online din ba yang gamit nyo? Or offline programer po siya?
Offline lang lods
@@Macgarage08 sir magkano pa program sa inyo? Gawa kasi nung fiesta ko pinalitan na ng forkshift at lamng loob. Tapos na linis na din. Pero pag tumatakbo bigla nalang namamatay po. Tapos mawawala na drive at reverse.
Sir pag p2932 code eh passible ba na TCM din ang prob po?sana po matulungan ty
Need mopo itroubleshoot may na dedetech syang fault. Pwedeng sa TCM or ibang issue.
Ty po.ang fault nya po ay shift fork A position circuit range/performance.
Sir normal lang ba na di mo malilipat ang gear pag kakapalit lang ng tcm?
Not normal sir, kahit dipa na rerelear yung shifter dapat nagana parin
@@Macgarage08 thanks po sir..
Sir saan k d2 sa middle east
Sa khobar sir
Boss, san location shop mo?
hm po sir ganyan scanner?
Sir chat tayo sa messenger kasi gusto ko sana malaman if gumagawa din kayo ng ganun or may kakilala kayong marunong regarding sa problem ng ford fiesta 2012 automatic ko
Pag not moving pag linagay mo sa drive or reverse, and pag pina rest mo ng ilang oras gagana na naman, then after makatakbo ng saglit, balik problema na naman biglang hihinto and di na namn gagana drive and reverse.
Pwedeng TCM issue. Or sticky na Ang dumi sa loob ng bell housing kaya nag iistock Ang mga shifter fork.
@@Macgarage08 kapapalit pa lang sir ng tcm
Kailangan ba sir , ibaba transmission pag lilinisin bell housing?
If kapapalit lang ng TCM tapos same issue. Faulty Rin siguro napalit sayo.
Yes need ibaba Ang transmission para malinis.
@@Macgarage08 ganon din ang issue ng ford fiesta ko pag tumakbo ng mga 3km lalabas na Yong transmission hot wait 5min. Iilaw na din transmission sa dashboard
Yang adaptation sir, yan na ang sinasabing reprogramming?
Yes po sir.
What tools do I need to remove the tcm
Plier, screw driver , 10mm ratchet. Deep socket is much better.
Sir sa third gear lng Hindi pumapasok
Nice mark
Sir magkano po Tcm.ty
Boss san k bumili tcm?
Magkano bili mo sa maxi pro brother.
Umabot din ng 60k kasama na yung set ng pin.
Great video thank you
Thanks
What kind of Autel are you using
This is online programming or what can you tell bro
No bro. Tcm adaptation is just offland
yeah bro I change whole transmission of ford ecosport 2015 but after that I try to reprograming with my autel maxisys ms906 pro but can’t successful can you help me to fix that issue
And I do the same procedure but can’t successful
TR(Transmission range) Sensor Adaptive Learning ,,,when I reach here then showing unsuccessful from the park writing in red
ipapaayos ko po sana TCM ng ecosport ko ano po kaya number nyo?
Sure po kaso nasan po ba kayo? Nasa middle east ako
@@Macgarage08salut pour la programmation du tcm avez vous utilisez otre appareil pour le clonage, oubien c'est avec maxipro vous avez tous géré merci pour la vidéo
Hm po control module
Hi sir may contact po kayo yung barkada nyo sa zamboanga? Taga zamboanga po ako
GG autoclinic. search nyo nalang po sir sa Facebook active naman Yan lagi. Salamat po
Hello, what's the name of the scanner?
Thanks.
Hello, is a autel maxipro
Paano kung walang scanner
Di po pwede, need i relearn
Hello I got ford focus 2012,
I have problem with my transmission sometimes the reverse not working, sometimes R D N showing on car board, I have took the car to server shop it shows this code p0606.
The told me u need to change TCM.
Can your help what exactly the best TCM for my car and how to install the software?
Thank and if you have whatup give me ur number?
Thank you
Hello brother ahamd, buy the original one only, don't buy anything other than that.
@@Macgarage08 where can I find the original one?
And how much you think it cost?
Thanks you