392 HEMI SWAP on a 3.6L Jeep Wrangler JLUR!
HTML-код
- Опубликовано: 19 ноя 2022
- The Lite Brite Garage (aka The Daycare Center) takes an America's Most Wanted 4x4 Hemi conversion kit and swaps it into at 3.6L Jeep Wrangler JLUR! It's the perfect way to experience the power of a 392 Rubicon without having to sell or trade in your current Jeep Wrangler!
You can check out all of AMW4x4 Jeep engine conversions here - www.amw4x4.com
To check out more Lite Brite Nation content & merch, click here → linktr.ee/litebritenation Авто/Мото
I like the Chris/Bec build job videos over the regular travel/outdoor LiteBrite vids. Don't hate me people.
+1
Definitely better for me to
100% agree
Same
It’s refreshing. I even like the fact it’s not just off-road. Super cars, drifting and auto parts. I’m wondering about the Audi. Perhaps a rally car build?
I see Chris and Beck working on an engine, I hit like before even watching. The tips from Chris are so useful and show his attention to detail
Another Sunday morning. I got my coffee and sat down to watch and learn from another Lite Brite video. Then Chris said he had a big package and I laughed so hard coffee came out my nose. Thanks.
These guys are on another level when it comes to turning wrenches. Chris's tips are brilliant!
funny part is that chrysler now makes a 392 jeep wrangler rubicon but it’s way cheaper to do it this way. average cost for new 392 jeep is about $31k and a crate engine(for what i could find) is around $10k
I really appreciate how much you guys care about your clients/ friends vehicle's!
I've done engine, transmission and drive train swaps they are no joke. Most people watching this have never even felt the weight of a wrench.
Awesome job.Chris and Beck you made that 392 Hemi and trans swap look so easy it seemed more like you were just replacing a bad 392 with new crate engine... And seriously you both did a crazy bad butt job can't wait to see the next video with both of you Working on Beck's jeep
When working with at least one other person, the duo + can experience quite a few laugh moments; especially with parts and tools naming, (double understandings) - Assembly is another possible 😳 opportunity, (for those who understand automotive work and talk). Glad you both keep it funny, much appreciated. Thanks tons!
You can use a hose clamp instead of a 13mm wrench and silicone spray on the rubber hangers instead of WD40. I love watching the builds, being a tech myself i love the technical vids. One day im gonna use all your tips to build my own jeep. Great vids as always!
Great video, been wanting to see you doing one is these!!!😃 You and Beck made it look so simple!
This is a great channel. I really enjoy the variety of stuff you guys put out.
Another great Chris Bec video as always , thanks guys 👍
Lite Brite Garage is my favorite by far. Thank you for your time.
The Dynamic Duo are at it again!!! Thank you both for such an entertaining and informative video. Until next time... Wrench safe.
For those bolts you couldn't get loose there's an impact driver that's made to go on a pneumatic/air hammer. It has a handle to turn the bolt in either direction in conjugation with light to start impacts from the air hammer. Works quite well.
Love seeing your builds. So cool. Love how seeing Kevin and Britney do work in there drive way to now seeing Chris and Beck. God bless take care.
I dig these vids, keep them coming!
Great vid. I am really liking the wrenching and fab vids. It's a great way to start Sunday morning, my daughter and I are going to be replacing motor mounts and alternator on Mama's XJ. She really likes you Bec, you have become one of her hero's!!!!🤘🤘🤘
America's Most Wanted is the absolute best !!! Chris and Bec, love the shop videos ❤❤💯🤙
AMW would be proud! Great job y’all! Much love from Louisiana
Good morning Lite Brite Nation, Much love from Montana. Hemi swap the world.
Awesome video. I'm getting ready to do my own semi swap. This was very helpful, thank you!
I love watching these two I learn a lot from them
Bec’s smile is awesome!
I just so love Chris and Bec builds and workshop time. Freaking awesome team, love your work.😊🎉😂❤😊😂🎉❤
Great video! Using the seatbelt to prevent the steering wheel from moving is a great hack, thanks for sharing.
Beth's welding is breath taking(ly) impressive!!!
You two are amazing! Doing a whole AMW 392 swap yourselves! Bec with the welding, Chris with the wiring corrected - great team! I would have loved to help video this process. Lucky JLUR owner. LiteBriteNationSwapsRevMakers!
I can’t say how much I appreciate cable/wiring management!!! Proper wiring can eliminate so many future failure points.
I have loved seein the builds that Chris and Bec have done together. Love all the light bright content. Keep up with all the great content. Was also wonderin when is another build video on Bec's jeep?
good to see a couple working together to get the job done cant argue with that at all
Watching you separate the cab and frame is educational. Even makes a novice feel like it is a do able task.
Small inexpensive moving dollies come in handy for moving t-cases and stuff around the shop. This doesn't tie up an expensive creeper for days.
Thanks for sharing.
Heck yea ! Chris we need to see some short vids on your wiring tips . That winch disconnect is super sweet !
Happy Holidays!!! Kevin, Brittany, & Chris & Becky, & to your families!!!🐊😎🍻🤙
Looks like we have the same temps here in New Hampshire. Love you two turning wrenches!!! Great team!!!
bec is so flipn awesome. love how you two work so well together. awesome job chris/bec
Good stuff you guys work well together
Amazing job looks so clean
We just finished mine Friday. It's a beast for sure.
Another great video! Keep them coming please!
Yaaaaay happy Sunday to us!
Chris and Bec Rock! Happy Trails to you all!
Chris the coolest guy on youtube , keep going Lite brite nation 😁
You Two (Beck n Chris) need to do the next King of Hammers! I see chemistry unstoppable 👍 Love these how to vids !
Been waiting for one of these
I so want to do a 392 swap on my 2020 JT. AMW's conversion is really top notch.
Love the install! Wish AMW setup was CARB legal. Awesome to see most of the work it takes to do it.
Would love to have that in my 2018 JL. Nice work!
Nice work you guys!
Back in the day that squish nut was called a squish nut. No, no, it was really called a "Nutsert."
While working on aircraft I learned to make "nut plates" that typlically have three holes usually in a line, but can be in a tryangle formation to place the nut plate in a corner. In my experience and observation, nutserts tend to be good one time. If the end of the bolt gets too dirty or rusts you must apply more torque than the squishy part of the nutsert as it can tighten/squish only so much. Then you must drill it out and the original hole of the nutsert can be damaged and unuseful especially on sheetmeatal.
Usually the center hole on the nut plate is drilled and tapped for whatever fastner you wish to use. The other two holes are for rivets, most times I use 1/8 inch pop rivets as they only hold the nut plate in place and there is no need for a socket or wrench. Personally, my limbs can flex and pronate only so many ways and I rarely have someone to hold a wrench on the other side where I cannot reach.
Most plates I make are from 1/4 inch steel, but can be made of aluminum and can be thicker depending on how much torque or whatever other detail you need to deal with. I made nut plates to fasten older Toyota mirrors to my truck by boring and tapping the bolt hole pattern on the nut plates and bored two 1/8 inch holes for rivets between the two bolt holes to keep the rivets out of sight.
The mirrors come with gaskets that seal not only the fastening bolts, but hide and seal the rivets also. Most times I smear a coat of body seam sealer on the nut plate to seal the matting surfaces and I put some in the rivet holes for good sealing. Silicone is kinda good for that, but I would rather use Pipe Dope over silicone when I have no body seam sealer.
Seam sealer and pipe dope can be clean up for a nice looking "seam" around the nut plate for a clean look that I will not be able to see from my house, but a real Marine will always know he left a good seal with a professional looking finish. Remenber to paint the nut plates to prevent rust. I typically use "rattle can" paint-primer to speed up my work.
I yield back the soap box...
LMFAO!! Brit was not happy with you!!! amazing job as always and top notch work from the both of you!!!!
Now I understand what makes a Master Mechanic. Love to Watch you guys. Bad Ass welding too! #truetradesmen
Fabulous jeep journey & transition .🥂🏁🥂🏁. One hell of a fashion bug thriller👀. Good for 150000miles. Another life time treasure for some one 🏁
HELL OF A NICE JOB!!
Amazing job. well done guys
You guys are doing awesome job ❤❤🎉🎉🎉
The outtakes...lol...Coffee just shot out of my mouth hahaha
love the break line tips .
Keep rocking it middriff!! I think you could lift that engine on your own btw. NEVER MISS LEG DAY!
We need more of this
love seeing the 32 in the back ground
Yes without doubt my kind of people, Chris and Bec's your a brilliant team,
Brittany did you have to steal it ?? 🤣😆🤣😂
Wow the seatbelt thing is a huge help
Thanks!
Yo love these videos dope job
A 392 in our Gladiator would be really cool.
"The body from the 'Chassidy'....."🤣😅
i was all waiting excitedly i might add for the test drive but nothing lol. still was a good vid
Hey kids! Always great to see the goings on in Lite Brite Day Care w/ Chris & Beck entertaining us via smooth /smart / skilled work. I'm surprised though. There's the lift; but garage is minus a, "cherry picker"... . You're going to need it when the really bad snows hit & the forklift will cram the garage space... . Well, something to consider..., okay? So now on to (patient(?) Brittany's Corvette? Otherwise as always..., be safe out there &... America First! 🚙👍
Have a picker. Just harder to deal with in the shop, fork is faster for sure. 😁
Yes I can watch Chris all day freaking great Mechanic!! Go Chris Bec you are awesome!! Great team!! You all need a body shop on that place and guy like me work his butt off ,,paint some beautiful jeeps !!😊
Great video thank you!
Thought that was for Beck's jeep at first, was like heck yeah.
I enjoy watching the builds also more Bec and Chris please
Cool stuff
I love these Bec and Chris builds! Why not drop one of those new 392's in Bec's Jeep? If Bec's Jeep is built to the max, it would be a great advertising project? Keep up the good work!!
Dam Chris, you and Bec make everything look easy peasy lemon squeezey. I almost think it's time for y'all to put up an even bigger shop! Funny that white JL looks just like the white AMW JL my buddy has Kevin has (see my vids). When can you guys work on my rig?
Cliffhanger on the B5 S4 🤣🤣 I've got an '01 love it!
I love Bec & Chris
That’s was quick for that amount of work
You rock Chris
Wish You guys could convert my jl 2 dr from 6 speed manual to 8 auto with that transmission. Great work.
There they are explaining about all the stuff on the table and I’m just trying to peek the LJ 😂
The ending lol , everyone forgets sometimes
Brittany cameo EXTRA to an already awesome video!!!
You 2 rock
Really need you to build my JL
13 fingers huge help
Awe, I thought Bec was getting the new engine. That would have been 😎 cool.
I like seeing the tech videos....
I started watching this video in 2022 and finished in 1979 thanks to that ‘stache.
Y’all should get a gantry for these replacements and since it’s on wheels and they’re adjustable you could use it for all sorts of junk and stow it away nicely some of them are pretty reasonably priced800-1200 if my shop was big enough I’d use it for everything bumpers puttin on tires taking off hardtops basically anything that requires lifting 😂 Also diggin the stache
Lol that was awesome 😂big package lol🤘
Wait you skipped the induction heating the body bolts to cook the lock tite off before removing or you snap them off
“We did some grinding” 😂
For that seized skid plate fastener, a large nut over the head, weld the inside of the nut to the seized fastener head...
Beck&Chris sweet video on making aNice Jeep into bad Ass Big Boy Jeep. Can we see more of the Muscle Jeep in Action? Thanks and Have a Great Thanksgiving Day. Peace Be With You Two. Greg of VanWert
Omg, you two are the best. Bec breaking two nuts...😁 that's one sweet diamond oh I mean 👹
would be cool to see an engine swap from a 2004 jeep Rubicon inline 6 to the v-6 that comes out of the jeeps your putting the new engines in
I would gladly volunteer my jeep 😉😉
How does someone get in touch with you to have you guys do some work? Want to lift a TJ but I don't have the equipment to do the SYE, so thinking about just having someone do the whole project. Watching your work on these projects, it's pretty easy to trust having you guys do it!
Prettiest stuff ever