DELETING the GAS TANK on a Jeep Wrangler JL!
HTML-код
- Опубликовано: 8 июл 2023
- After breaking the factory 4:1 transfer case on our Jeep Wrangler JLUR, we’ve decided it’s the perfect excuse for a total Jeep rebuild. So we’re swapping from the 3-link rear suspension to a triangulated 4-link, which means…we have to completely delete the factory gas tank and install a relocated Motobilt fuel tank instead! Easy enough…until we get sidetracked by all the additional damage and surprises our Jeep has!
To check out more Lite Brite Nation content & merch, click here → linktr.ee/litebritenation 
Авто/Мото
![Finesse2Tymes - Pretty Ricky [Official Music Video]](http://i.ytimg.com/vi/xIoP_mhYRT0/mqdefault.jpg)
For anyone else that does this kit in the future, I used the Diablo brand oscillating tool adhesive scrapers to remove that rear tray (found them at Home Depot). Took 10 minutes with minimal mess. I also had issues with the push to connect fittings Motobilt supplied, so I switched to AN line as well. I used Vibrant Performance Fuel Adapter Fittings 16921 for the fuel pump to AN line, and Russell Fuel Rail Fitting Adapters 640940 to go from AN line to the stock fuel line "quick disconnect." Final comment, I *think* the stock JL fuel pump evap fitting is a SAE J2044 QD connector. I have not confirmed that, but it seems to be close.
It's finally happening 😃!!! So glad the parts finally came in, have a blessed Sunday guys ❤️❤️💯🤙
this has been a fun build series to watch!! the end will be sweet!
Another great segment guys. Thanks for sharing.
How do these guys only have 250k subscribers? I watch million plus channels that can’t keep my attention like this group of people.
Quality over quantity!
A lot of people watch the videos but they don’t subscribe
Stepchild 3.0 is going to be even more awesome than it was before! And as I recall from a previous video, you were thinking the stepchild was pretty close to perfect. So it will be very exciting to see how much better it is at the 3.0 version.
Hey Chris, remember the first time working on a non-NY vehicle!! It was almost as pleasant as an orgasm!! Lmao.. not having to replace all bleeders on the calipers, or replacing all the fuel/brake lines everytime you had to work on something. My first time was replacing rotors and pads.. i had the grinder, the drill/tap set and then.... everything broke loose and worked as it should!!!! It was amazing.
I sold all the vehicle's i bought down and bought new/used southern vehicles.. never again will i buy a rust bucket. Ppl ask me why i crawl below every vehicle i look at.. i was shocked they said they never have before and never thought to look under the vehicle!!! 😂😂 oh how the times have changed from having to bondo the rockers, fenders and all that, or if you were broke like me, zip tied and tuct taped everything after filling it with Great Stuff to keep the form!! Lmao
I'll miss seeing Bec doing the tech and build videos with Chris. Loved those videos with Chris and Bec, too bad she's gone from Lite Brite Nation!
They tell anyone why Bec is gone?
There’s no future for bec on the channel. She was an apprentice, has taken what she’s learned and now has a good paying job. We’re no longer taking in any builds so there’s no way for her to make money. We will be focusing on our own personal builds which was always the original plan. We had to take customer builds in so she could get paid and during that time ALL of our vehicles got neglected and that’s not acceptable. So we went back to the original plan of just having chris as our friend and personal fabricator. Bec was never in the plans and we tried to adapt to make it work with 2 people but that’s didn’t end up working out so now back to the original plan. Bec had 4-6 months notice of this change and that time has now come and gone.
I know I’ve missed seeing y’all’s rigs getting built or worked on during that time. I’m glad and definitely understand y’all’s decision. Glad to see (y’all’s rigs back into the shop spot light”
Thank you for an actual explanation to why she was poof gone .
That makes more sense, and answers most of the What Happened To Bec.
So, she was Chris’ girlfriend until she was not and shit got weird. Someone had to go and it was not gonna be Chris. Too bad it did not work out. Still love the channel.
To think about all of the places that the StepChild has taken you and then seeing that bed pump 🫣. That looks great, thanks so much for sharing this!! That EVAP filter , poor little guy 😂. Much love guys ❤️❤️💯🤙
This is going to be one heck of learning curb and rebuild for all of us! Thanks for bringing us along! Happy Trails to all at LBN!
C-U-R-V-E, as in learning, not "curb". It's a learning curve, which can be shallow or steep, but there is NEVER a learning CURB.
@@johngalt7733 ...guess he's not invited to the "Gulch", eh?
Chris could totally fab up some old school fender headers that run into side pipes that double as rock rails
Build 3.0 is coming together nicely. Can't wait to see more of the Build.
Thanks Chris.... for reminding me I live in the rust belt and you don't. :)
That was fun! Awesome! Thank you so much for sharing.
Love this kinda content from you guys. Everyone chipping in on the step child is just a warm fuzzy feel, once again gold as always! Stay safe and Crazy :) #LiteBriteNation
I have this setup and it's awesome. I did do the Motobilt frame chop at the same time. Mine is a JKU and double triangulated. Lesson learned with this setup protect you driveshaft yoke because it hangs there as a target.
Thank you for the more indepth videos. I commented a while back about doing this and I don't know if this is why or what but it is much appreciated.
The in-ur-end-o counter flat-out melted down around the 32 minute mark. Well done, Chris. Well done.
It's interesting to watch the rabbit hole of a build of this level. Pretty surprising that tank kit still fit it as well as it did. The stepchild is a JL only in theory at this point.
Great Upgrade Guys!
More fun in the DayCare! Y’all are so silly sometimes LoL! Need a power wash? Chris, you are a fabricating and innovating genius. So much dirt, so little time! Only five years of accumulation. That sound! The burble of the open exhaust is Killer! Nice outfit Brit! LiteBriteNationFlagsAnew!
Whatever you’re paying him, it’s not enough!!! Great video and even more awesome engineering from “The Mechanic” aka Chris the machine!!!!
If we could pay him a million plus a year, we would. ❤️
3.0 is coming along great!! Very nice tank setup they have and could be used as a second tank! Definitely need exhaust cutouts!!😃
I enjoy all of your builds and videos. I would like to give a shout out to my good friend Tony Pellegrino of GenRight who came up with the concept of putting aluminum gas tanks in our Jeeps. He started out in 2006 and built the first tanks that would allow you to go to about a 100 inch wheel base on your YJ and TJs. These tanks included a cut in the tanks for the rear end to fit. This was the start of his very successful company. So many companies have followed with his designs. By the way, I do not think that is bad.
Honestly, I am now more interested in getting some of that rubber mounting tape that held that tub in place. That's good stuff.
Chris, thank you for your “training” info update. Oh and you need another “protégée”. Y’all could call it the Lite Brite Nation Joat (Jack of All Trades) School. 😁
So awesome to see that rig getting rebuild! I believe that mystery stuff is actually dog food 😂
Thank you I love all you videos and you guys are awesome
Im glad yall came back to the build, cars are cool but this channel was built on off road adventures and upgrades welcome back
We haven’t done a car video in like 8 months. 🙂
This tank works great on the diesel as well. The fittings that Motobilt supplies don’t work. You can order more fuel line and actually use all the factory fittings. They are push in style fittings. Takes some force but doable. I cut the tray out leaving the glued in edge. Then came back with a thin scraper that I heated up and melted to glue to remove the remaining plastic lip. That glue is no joke!
@Motobilt really well made products. I wish they supported us guys with the old CJ jeeps. I do envy you guys with the newer rides' parts availability.
Rear mounted cell is badass! Seriously makes me want to do that to my JKU!!!
Great video thank you!
Yes, do the exhaust with the valve for loud and normal.
For my installation, i just cut out the bottom part/tray itself and left top part of the tray attached to the metal bidy alone. Placed silicone under the metal fuel tank plate in the trunk and its working fine for now.
The stepchild growls like a lion. Sounds mean.👍
Its going to look awesome guys
@21:45 I don't even remember how to GET to my cabin air filters on a JK lol
Mel from Brooklyn no need to apologize its true
These thumbnails recently are killing it. Automatic Like everytime. 👍
Although the sound without headers is awsome, a large diameter set of exhaust pipes would make much more sense. Winter and mud are real.
You are blessed to have Chris and Bec to rebuild what you damage and make it better. Lite Brite Team.
Just chris. Well chris and Kevin.
Is Bec no longer on the channel?
No, she’s gone.
@@LiteBrite That's too bad, she was awesome!
@@LiteBrite Hey Brittany don’t be a Blonde and Bring Becky back
Kev I would check with Next Venture and see if they can make a plastic skid for the tank and just glue it on the tank skid with body panel glue it’s super strong
...you can't have enough skid plates under that 'exposed' tank.
you guys need some ice cold beers, this a total Saturday beer drinking project.... lol love it
Let’s think about this for a minute… how did Kevin get a woman like Brittany to live in a Jeep for 3 years?
Let me flip the question, how did Brittany get lucky to get a hunk like Kevin and a sweet jeep?
I’d say we’re both pretty blessed to have found our ride or dies & built a rad life together. 🥰
Match Made in Heaven
@@GetOutThereToday Kevin has Money
@@gregoryh4601 that will do 8t every time
I love how the tank sounds like a drum
As usual, came for the thumbnail and stayed for the video 😂
You guys need to get a transmission jack to use when on the lift.
lol @6:25 "We are so far off..... to a great start." hehehehe
For that tub an oscillating multitool would cut that right out, I work on houses and use one to cut into tight spots and they cut wood, nails, metal studs all clean cut and with no problem. Blades add up quickly tho.
Edit: oh you guys got one anyway lol
Great 👍 content and Thanx for Sharing
Have a Great Day 👍
God Bless America 🇺🇸🙏🇺🇸
Looks like guitar string or the harbor freight window removal tool would help a lot with that. After the center is cut out.
i liked this vid lots of stuff goin on. i was talkn to u guys to use an OSCILLATING tool lol!! i oike the rhino liner but would have used on outside as well thats what its for, n used the left over rubber n glued inside, nice touch usin on the straps tho!
Britney.... This jeep has been through hell and back.
Kevin.... This jeep let me go up the back door and didn't resist!
I love my Handy Flag. I have it because of your channel!
If you have a P00546 code it happens when you change the battery for some reason, I learned that after i deleted the auxiliary and replaced the main. Deleted the DTC with the tazer. My 18 has 82k miles and i need to upgrade do much. Right now i live through you guys lol
That's so cool need to replace the sending unit in my yj. Any recommendations. God bless take care.
Getting that tray out was quite the undertaking, lol
That thumbnail got me clicking sooo fast.😂😂😂😂 I say go for it!
Sweet flag definitely getting one since I know I’ll need one anyway.
Living your best lives!
Kevin’s face when fired it up at the beginning! Like a kid who got his first BB gun for his birthday. Loved it!
I'm curious why you didn't fix the rust 2" away from where you deleted the tank and primed and painted the open area? Love the vids!
Can't wait for the video where Kevin knocks a hole in the fuel tank. Or hangs up so bad he has to be winches out. Going to order my popcorn now for this coming event😂😂😂😂
I rarely watch youtube on headphone, but I choose the good one to do so 🔊🔊🔊💯
I wonder if I gotta do that to my tundra since I added a 42 gallon tank 🤔🤔
The gold is an anti rusting coating metalcloak uses on alot of their products
Hope motobuilt works out a gas tank relocation for the new broncos… besides being in a shitty spot, the 2-door tank is only 15 gallons 😑
And here I thought 17.5 in the 2 door Wrangler was bad...My Corvette holds over 18 gallons. There is no excuse for vehicles like these to have such small fuel tanks.
@@ZboeC5 couldn’t agree more, especially when they get less than 20mpg
For future reference I used a Sawzall with a scraper blade on it the rubber and storage pan came right off
Nice pole
On another note.. isnt Kev the one ALWAYS preachin about cleaning a cabin air filter😂😂😂
Was it skittles that ate the paint?
Those small round clusters looked like old M&Ms or Skittles.
9:45 - does that mean this Jeep is a “candy ass?”
Hi all, I noticed that you used coolant hose on the fuel fill hose, It's going to deteriorate from the fuel and will be a terrible problem later on. I would hate to see fuel leaking all over the trails, or worse catching on fire and burn down the jeep!
Sorry to hear about Bec.. But that's Life
Put some of that plastic on the bottom of the tank shield just in case
You should get a plexi cover to show off the bling
Where is the Beer fridge and couch / TV / Stereo system and Grill ?
I vote for open headers 😊
That 2 minutes was not wasted. Lol
41:10 the look on the face of a child when his expectations are exceeded
Nice!
Millermatic for th win every time
Mentos... The Fresh Maker!
Have you ever attempted the Mackenzie trail?
Hey Kevin, just run the exhaust up through the hood. Zoomy style with flappers. 🙃
*Cleetus style lol
NICE WORK WHERE IS BECA ?????
Bec is gone, as there’s no future for her on the channel. She was an apprentice, has taken what she’s learned and now has a good paying job. We’re no longer taking in any builds so there’s no way for her to make money. We will be focusing on our own personal builds which was always the original plan. We had to take customer builds in so she could get paid and during that time ALL of our vehicles got neglected and that’s not acceptable. So we went back to the original plan of just having chris as our friend and personal fabricator. Bec was never in the plans and we tried to adapt to make it work with 2 people but that didn’t end up working out so now back to the original plan. Bec had 4+ months notice of this change and that time has now come and gone.
The exhaust sounded like that ferrari in the movie Feris Bueller Day Off
I have an EcoDiesel and that tank would be perfect as a water tank in the fuuture once i delete the def tank. I can laways get a secondary fuel tank to fit underneath since im not planning on going so crazty on the suspention. Its ao grat to see these products coming to market. I cant wait to build my Jeep out..... Now, to sell an organ to pay for everything. 🤣
im dying right now its a multi tool or a reciprocating saw
strange how they make a place to put the tank but terrible plan on where to run the fill hose
You could have used the multi-tool to scrape up everything.
You sure that radiator hose is gonna last? Doesn't that have to be fuel resistant hose?
We’ve ordered some. The hose will be ok for now
@@LiteBrite 👍👍
See you at the Jeep invasion, Ronnie from Georgia.
3.0 is looking good. But I wonder if Kevin ended up on the floor after some of his comments to Britney.
We were doing this 10 years ago.
Don't forget to clear out and paint corroded spots where you guys found antacids or candy or whatever that was.
Wonder if you guys saw my video on the tank install? I came to the same conclusion on the vibrating cutting tool…
I think we did actually! It’s what we were thinking and then that kind of made up our minds! Nice work
Now that’s some tough gorilla glue 🫣