370Z-G37 Long Tube Header Install (STEP BY STEP WALK THROUGH) (STEP TIMESTAMPS IN COMMENTS)
HTML-код
- Опубликовано: 11 окт 2024
- This video gives you a in-depth and entertaining step by step walk through on installing your headers onto a VQ37VHR engine. The cars that share this engine are the 370Z, G37, Q40, Q50, Q60, and M37. This installation video also applies to the VQ35HR engine in late model 350Z and G35 cars.
Nisformance upper o2 extender: www.nisformance...
Step 1: 00:38 - Disconnect Battery
Step 2: 00:54 - Remove Stabilizer Bar and Intakes
Step 3: 02:45 - Remove Heat Shields
Step 4: 03:53 - Remove Exhaust Manifold Nuts
Step 5: 07:03 - Unhook Upper O2 Sensors (AFR sensors)
Step 6: 07:40 - Jack Up Car and Remove Knuckle From Steering Rack
Step 7: 08:25 - Disconnect Cats or Test Pipes from Y-Pipe
Step 8: 09:57 - Removing The Steering Knuckle From Steering Rack (Revisited for emphasis)
Step 9: 11:37 - Swap O2 Sensors from Original Pipes To New Pipes
Step 10: 12:24 - Extend Upper O2 Sensors
Step 11: 13:52 - Put Header Gaskets On Studs Between Engine Block and Headers
Step 12: 14:40 - Tighten Header Nuts Down
Step 13: 15:40 - Put Gasket Between Headers and Y-Pipe and Tighten Exhaust
Step 14: 17:30 - Plug In All The O2 Sensors To Their Connectors
Step 15: 18:09 - Put Steering Knuckle Back On Steering Rack
Step 16: 18:26 - Reassemble The Intakes and Stabilizer Bar
--------------------------------------------------------------------------------------------------------------
Cobalt SS Giveaway Video: • I'm Giving Away My Sup...
IF YOU WISH TO DONATE:www.paypal.com...
www.salvobrothers.com
Follow Us On Instagram: @salvobrothers
#headers #isr #vq37
definitely a mechanic when i catch you using a 1/4 ratchet for everything no matter how torqued down it is. also great video for beginners dope!
This gives me so much more confidence to do mine! Awesome video! Thank you!
awesome, glad we could help.
@@salvobrothers5928 thanks for the video! I just installed my isr headers myself without any help 💪🏿 lol
Which is the correct upper o2 expression for a 2019 370Z? I have Isr y pipe and long tube headers waiting to install but I don’t know which is the correct o2 extension I need
you'd have to look that up i don't know
I have a G37 and I installed the long tube headers however I was told I need O2 extensions so the check engine light goes alway I just don’t know which ones to buy. Can you help me ?
What did you do with the ground wire that was connected to the heat shield
honestly don't remember
What do you guys charge to install these isr headers on my 370z
Hey! Glad to see our video piqued your interest! Here is our phone number: 610-384-1352. Give us a call if you want to get this quoted out and scheduled.
How bad is the exhaust smell/fumes know? Great tutorial!
considering no cats its fairly smelly but not crazy
@@salvobrothers5928 thanks bro!
@@robertbraithwaite5873 no problem
I took my car to a shop to get headers put on and they messed up the alignment with the steering column.. what should i do to fix it help !!
go back tot he shop and tell them its not right and needs to be fixed, any reputable shop will own up to that small mistake
A lot of people report that they get 02 sensor CELs on after installing these headers. Did you have that happen?
not on this car, not sure if they are installing them incorrectly or if they got a defective header
New video on how to install headers thank you! Will be doing this soon just waiting on the extension
Also tips on the driver side? I know it’s hard on that side what did u do to get easy access?
Awesome dude
Just watch that part of the video its nothin too special just different combinations of extentions short and longs sockets and open ended wrenches.
Hey bro I need help bad
We’re can I find the upstream extension?
That sounds absolutely sublime ! Makes me want a VQ powered unit
dude they are growin on me, his brothers sounds amazing check it out on the gram if your curious
I got some and about to install. Should I wrap or coat them?
wrapping them would be good especially if you have ram intakes
How long did the install end up taking you guys?
with filming about 7 hours
I want to get long tube headers but I am wondering if you get the check engine light on and if you can still pass emission test?
the headers have the exteneded bungs so it wont throw a light, you'll have to check with your state if it'll pass or not
Hey man so regardless I’d would need extensions for my 370 for the 02 to work ?!
for these headers yes
Yo yo yo brothers!! That engine pizza looks delicious!!! F- ing nice tutorial for real
Thnx bro!!
What brand of O2 sensor extensions did you use? I didn’t see any link in description
Type 2
I have a g35 coupe 2006 but i can't find a o2 sensor for this headers the only o2 sensors i find is a 2003 2004 can someone plz help me
where are you looking?
@@salvobrothers5928 enjuku racing and i found a page that makes them for hr engines and vhr but thats about it
if your just talking about the sensors themselves have you looked in your local parts store?
@@salvobrothers5928 i need a extension i have the o2 sensors but their not long enough the ones that isr make its only for the 2003 to 2005 g35
@@urielcastorena6094 ill get corlan to chime in on the subject
Which number type connectors do I need for a vq37vhr
not sure you'll have to look it up.
So how old was your z when you done this. Mine is 10 years old....just did catback. Rusted bolts but they came off....just wondering how durable those header studs are on a 10 year old car. Hate to break one off.....
We got warmer weather today...whoop whoop.
Right on brotha!
How the hell do I remove the driver side header middle nut underneath the runner
I have a 2016 370z nismo do you think those headers would fit my car ?
for sure
@@salvobrothers5928 I unfortunately bought isr longtube headers, super excited. The only thing that's holding me back is the o2 sensor extension. I've seen three videos including yours having a type 1 o2 sensor. You think I have the same o2 sensor as yours?
@@HectorGonzalez-fi7me i woudn't guess, id pull the sensor and double check the plug, nothing worse then having the wrong parts
On the sensors extension what “type “ do I get for a 370z
well have to check
Anybody know what “type” would fit a 2018 370z ?
We're you able to clear the check engine light after install I added non faulers and still had the code.
yes, the extensions help with that
get a tune
@@IamRokis its not necessary but will greatly improve the car
i have a 2015 3.7 Q50 will the O2 extensions fit?
yes if you get the right ones
what’s the piping size for the headers?
@@sadgxs8495 not sure
Do you need one or two extensions
one for each side
I just bought these headers. Would these work with the stock exhaust?
yea they work with the stock exhaust
Will the o2 extension cable fit my q50?
you have to check with your plug style I'm not sure
What would happen if you put the upper 2 sensor on the headers extensión?
im not quite understanding your question
@@salvobrothers5928 do you have Instagram?
Are those the oem header gaskets that you reused?
you can definitely reuse them if they don't get torn in the process
What type extension 02 sensor is for the g37 sedan?
your talking about the extension harness?
@@salvobrothers5928 yessirrr
@@matthewgomezzz5103 ill have to get corlan to chime in, im not sure which one it is, he may have mentioned it in the video
All the extensions were back ordered when I did my install I just used crimp connectors and heat shrink data logs look great
What type extension you ordered?
we explain it in the video
@@salvobrothers5928 no u didn’t
Does this fit AWD models on q50 some sites say not for AWD ?
not sure, i would follow what ever the sites say so you dont get any mix ups
It fits q50 awd 3.7
@@tleoipl37 thnx
How much do you charge to install them?
depends on how crusty the exhaust is, this fortunately came apart really easily. if your serious message us through our website.
what would give you more horse power gains, long tube headers or short headers with test pipes?
long tubes for sure but its not much
@@salvobrothers5928 by how much?
@@randygonzalez2266 could be 15 whp
Nice vid but OUCH that poor bumper is getting slashed my your jeans😲
By*
haha project car
Do I need a tune once I put these isr longtube headers on ?
no but you'll benefit from one
Okay thank you 🙏🏽
@@HectorGonzalez-fi7me no problem
That's cap it's required to run a tune
100% get a tune
Where did u put the ground wire that was on heat shield
its unnecessary
Will this fit with a tomei y pipe?
it should, it mounts up to the stock location after the test pipes
How is the drone?
it has some drone but its not terrible
do you think they will get in the way when doing transmisson work later on? you know how the clutch master likes to go out in them
of course you dont have as much access now but its not impossible
Does anyone know what type sensor is on a 2013 370z ?? Thanks
hopefully someone will chime in
Did you ever find out what type sensor it is?
@@tamlopez67 it’s a type 1
As far as types go what Ive found is that most years for the 370z have a type 1 and so does my 2010 but you can check for yourself by scrolling down on the link given it has instructions on how to check.
thnx for that
My 08 G37 coupe has type 4
Is this stock exhaust?
nah its aftermarket ill get corlan to chime in what it actually is
Has any one on here installed them on a 350z hr I just wanna know if there are any fitment issues with steering shaft and knuckle
What year was the 370z
2009
@@salvobrothers5928 already bought it and installed it on my 2014 thanks!
Emissions?
from a computer standpoint its fine but a tailpipe test it will fail
I'm a life long mechanic my self. but it's soo damn hard towork
its just tight in there
Where are yall?
parkesburg PA