Fence Post SMASH! repaired with PDR!
HTML-код
- Опубликовано: 28 мар 2023
- So my customer accidently reversed into a wooden fence panel which was quite high up and unfortunately the parking sensors failed to detect it was there and then... BANG! Next thing you know the customer has got a very nice sharp crease running through half of the rear panel.
Luckily he had seen some of my repairs on RUclips and had used me previously to repair a minor parking dent on his door, but this time he wanted to put me to the test!
After viewing this damage I knew that it would need a lot of force to pull this hard crease out, so I had to make a bespoke pulling system using some wood, a hydraulic ram and some chains.
Using this system coupled with some Keco centipede tabs and some collision hot glue, this was going to be the only way I could repair this.
Check out the longer more in depth video on my main RUclips page!
Filmed & edited by Jake Quintin
Please SHARE this video and give a LIKE & SUBSCRIBE to keep in touch with all the latest videos…
www.1sttrackdents.co.uk
See you in the next video soon!
-----------------------------------------------
► Tools & Equipment I Use:
• Glue Remover (99.9% Isopropl Alcohol Liquid Cleaner) geni.us/Alcohol-cleaner
• Bosch Glue Gun - geni.us/glue_gun
• Portable Glue Gun - geni.us/Cordless
• Dewalt Heat Gun - geni.us/heat-gun
• Infrared Temperature Gun - geni.us/Laser-thermometer
• Kecotabs UK- kecotabs.co.uk/
• A-1 Tools - www.pdrtool.com
• Aluminium Knock Down - www.pdrprotools.co.uk
-----------------------------------------------
► Polishing Equipment/Consumables I Use:
• 3M Fast Cut Polish(Cutting Compound) - geni.us/compound
• 3M 02085 Trizact Hookit 6 P3000 Grit Foam Disc by Trizact - geni.us/trizact
• 3M Fast Cut Polishing Mop Head - amzn.to/36GisoY
• 3M Ultra Fine (Fine Polish) - geni.us/ultrafine
• 3M Ultra Fine Polishing Mop Head - geni.us/ultrafinemop
-----------------------------------------------
► HEALTH & SAFETY!:
• Ear Plugs - geni.us/ear_plugs
• Safety Gloves - geni.us/workgloves
• My Favourite Safety Glasses - geni.us/eyeprotect
-----------------------------------------------
► My Studio & Camera Gear Set Up:
• MAIN CAMERA: geni.us/bestcamera
• Main Microphone - geni.us/bestmic
• BEST WIRELESS MIC - geni.us/bestwireless
• Lavalier Microphone - geni.us/lapelmic
• Studio Lights - geni.us/studiolights
Note: Commissions may be earned from the links above.
(B) 
Авто/Мото
No fence post is a match for Jake!
😂😂😂
You are a genius for sure
Thank you 😉
Excellent job, I wish you success
Thank you! 😉
Doing that on a curved part is so hard. Masterwork
Thank you! ☺
You are the best
So strong ! you are very strong I watch all your videos being a bodybuilder myself since January it is a hard but exciting job.
It's a real treat to watch your very informative videos, thank you for that! hello from france
Hi Rafi, Merci! Thank you for your comment and thank you for watching 👍
You're a master of your craft, my friend. Where can I learn this skill? I'd love to start a business of my own here in California and give people an excellent service like you do
Thanks for taking an interest in my work and this profession, luckily you have some super amazing PDR tech's over there in the states and several of them offer training, probably the closest to you in California is Myke Toledo of "Denttime" 👍
@@1st_track_dents you're wonderful, brother, thank you so much and God bless you!
@@ulkenstride6964 You're welcome 👍
Abracadabra!
🪄
I bought the cold glue system I managed to use it but I don't think 100% .. it would be really great of you if you have the time to make a complete explanatory video of the use of this system in detail! thanks in advance !!!!!! Hello from France
Hi Rafi, I use the Glexo cold glue and it works great, although firest you need to make sure the panel is clean, then warm up the cold glue and slightly warm the panel and it should work fine. It won't work on very tight dents but it is great for pulling out much larger softer damage 👍
@@1st_track_dents thank you for your answer yes it is true that it is a really pleasant system to use which advances a lot of work on big impacts! thank you again for the great job of sharing! can't wait to see the next video!
Where are you based? Please
@@kevinjohn725 Hi Kevin, I'm based in St Albans, Hertfordshire, there is a map on my website of the areas I cover:
www.1sttrackdents.co.uk/areas-covered
👍
@@1st_track_dents pity .I'm in Manchester