Removing Large Bodyline Crease Dent with PDR! | TIPS & Techniques!
HTML-код
- Опубликовано: 5 фев 2025
- Today removing a large complex damage dent crease on a Honda Accord. Keeping the original factory finish using PDR to restore the vehicle back to its factory finish. Now its time to watch Ken perform the art of Paintless Dent Repair.
Training email me on this site
tinyurl.com/36...
PDR Training secretpdrpaintl...
Collision Tools
pdr-training-t...
Auto Body Suction Cup Slide Hammer for Dent Repair
amzn.to/3tBPtj3
Dewalt 20V Cordless Polisher
amzn.to/3QjM2aH
Plier for rolling sheetmetal edge
amzn.to/3mP5pegn
4oz Ballpeen Hammer
amzn.to/3mOL8p4
Gorilla Tape
amzn.to/3aViJLf
Soft Hammer
amzn.to/3mOnHMw
PDR Knock Down
amzn.to/3aYS5Bo
www.39-mobile-...
/ dentdiscountmobile
dentdiscountmo...
www.yelp.com/b...
www.yelp.com/b...
reviews.birdey...
www.manta.com/...
dent-discount-...
www.yellowpage...
www.angieslist... 
Авто/Мото
PDR Training Message Me Here!
www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/
Why you little cone man
Please give me some advice 2011 Tsx Only damage is what you see the rounded From the flare is okay except For the far rear
New subscriber I have a audi tts that was hit on drivers rear panel. I hit right above the tire. Would love to hear how you would tackle this beast of a dent Mr. Man of steel
Belíssimo trabalho! Ótimo profissional parabéns 👏⚒️💯
Sou do Brasil
Man, if you are not the best, I’m not wrong when I’m saying you are one of the best, your work is incredible, but even better than that, you are the type of person that is willing to share your knowledge, thanks
He played the video in reverse 😂😂😂
I'm a 30-year truck driver, and because of you, I think I just found the second chapter of my life. Very cool.
Pdr guys around York and surrounding counties in Pennsylvania don't know what they're doing at all. So as years went by I started doing it myself at my collision repair shop and watching your videos only made me get better by saving me time and money and increasing my profit. You definitely are the best. Thank you
I really appreciate your videos , I’m amazed at how you do these repair , as a retired body man , I will be trying this method on my cars ...you learn something new everyday ....Thankyou
Eating breakfast and drinking coffee while watching this video. My new routine.
That’s one of my favorite comments thank you Steven
Don’t drink and drive
This dude knows his job and perfects it daily
Damn this dude knows his s***.... I've been an aircraft sheet metal/structures mechanic for 35 years and I've never seen anyone like this guy... Dude is definitely one of a kind😮🎉❤❤
Thank you, my friend. I appreciate that.
I'm not at all in this field of work, and I don't have any dents on my car but you are a wizard at fixing dents! So entertaining to watch, thanks for going through all the work to share this with everyone!
Curtis Welcome to my channel thank you for subbing
@@DentDiscountPDRBodyShop nice job easy to learn from you
New subscriber.
Been doing conventional bodywork for 39 years. Know a good PDR guy for close to 30 of those.
Your skills are incredible. I know the damage to integrity of a car by replacing a weld on panel and you are a true talent in your repairs. I use a lot of glue tabs myself and they are amazing for repairs and still being able to watch progress. Too many techs still remove paint to start a repair and its not neccessary.
I will be following your work and try to learn some new things.
Thank you
Manofsteelpdr.com
Thank you for subscribing
I appreciate your comment
Bro, you just hypnotized the hell out of me.
I'm amazed, been an auto body tech for over 45 years, never thought you could have fixed that quarter panel, just really amazed, beautiful job.
Manofsteelpdr.com
I appreciate your comment James
Your a PDR beast man. Ive been slathering bondo and replacing panels since 1977. I sure wish they taught me PDR in trade school back then. But it was unheard of back then. Thanks for putting these out there for people to learn from. I’d pay just to stand and watch you for a week.
Sam Welcome to my channel thank you for subbing
Im watching again. Not only are you great at your work but your narration is top notch. Even non car guys could understand how you do it
New subscriber a panel beating student from Zimbabwe I enjoyed your lecture sir keep on sharing
The eagle I like it!! welcome aboard!!
I have three videos I need to edit
I have been a car painter since 1987. I’m 51 now and I am still in Awe of PDR. You are amazing at your trade. Love your positive energy. You go boy!! 💪. New Subscriber.
incredible work, been a tech for years doing heavy repairs, and this is amazing. instant replace at any body shop. Respect 🤙🏽 first time subscriber too
Welcome aboard Junior!!!
Thank you for your comment I appreciate it..Clark Ken
secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/
Never in the face of complexity! Have you ever not pulled off the impossible to most!
Your inner mind is focused as is your spirit and soul!
The man of steel has perfected with excellence! The ability to manipulate steel to your will!!
Again I’m blown away with the size of damage and the quality of repair!!
Looking forward to the next one bud!!
Thank you Robert
Hi, man of steel. Thank you for the straight to the point, deep core body repairing lessons. I am new in your channel. I learned well by your way of teaching.
Welcome aboard Arlie!! Thank you for your comment
Hii sir
spent 40+ years in the auto industry and I love seeing a master at work! you are amazing!
John thank you I really appreciate that.
That’s amazing to watch you do your magic on that panel. Great job.
Thank you David!!
Hi, Mr Clark i am Shekar from India, Bangalore. I follow most of ur video's
And have learnt few techniques of PDR
Thank you to be my mentor. 🙏👍
Manofsteelpdr.com
I appreciate your comment.
New subscriber!!! This is the best Channel with this kind of content, i really enjoied your work. Im from Uruguay
Marcin welcome to my channel thank you for subscribing
@@DentDiscountPDRBodyShop Benötigen Sie einen Autobeschichtungsfaktor?
He is a Pro in removing the dents. We really learnt a lot from his videos.
Manofsteelpdr.com
I appreciate your comment.
New subscriber! Really enjoyed learning from the man of steel! Keep on sharing plz
Torab welcome to my channel thank you for your comment
I told a PDR class in 2008, but you are way way better than I am. You rock!
New subscriber. 21 year tech here. Amazing job!
Welcome aboard Niels.. 21 years you’re probably pretty good you might even be better than me.. thank you for your comment
I’m a hail tech. I just like your videos man. You keep it simple. And from the looks of it you do some clean work!
Thank you Sam for your comment I appreciate it..Clark Ken
secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/
Great job on the huge dent and also your video is great too. Love what you do. Keep it up 👍🏼
Thank you Kurosh I really appreciate your comment. Clark Ken a.k.a. Man of Steel
secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/
Man of Steel , that’s my favorite superhero. I’m not a body man , just a firefighter working on my truck . You’re awesome bro , glad I stopped by 👍
Orlando thank you for your comment
New subscriber here. I’m working on my fleet of dented up old trucks with a porta power and came across your vids. I’m completely blown away by your talent and am watching and learning sensei.
You sir, are a skilled magician! Beautiful!
Thank you David for your comment
Dent Discount - Online PDR Training mom a new Subscriber my name is Johnnie Welch
All of your videos are incredible. Ur best man and thanks for sharing your skills !
First time watching it’s amazing what you can do. Thanks for sharing.
Welcome aboard Bill and thank you for sharing your comment.. it helps my channel grow I appreciate it.
True artist! : )
Just found you on here while trying to learn a little bit about body work. Thanks for the Videos they have given me some other ways to try to repair a dent in my truck.
Mullens thank you for your comment
This guy is unbelievable makes me wanna put dents in my car just to see him fix it 😂
Laugh out loud that’s a funny comment
incredible, im hooked ! been custom painting for years, what your doing here is truly art! im watching for entertainment yes i am strange . but seriosly concidering this. the worst part of what i do now is bodywork and prep to finish, so i can do my art. but this!!!! your awesome thank you so much !
First time watching you have skills. Thanks for sharing hopefully i can learn alot from you
Regards Ash
Thank you Ash for your comment I appreciate it..Clark Ken
secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/
I'm a newbie and i watch all your videos, don't watch TV anymore,you are the best here and i leared a lot from you,you explane everything so well,its unbelievable the damage you fix,i want to learn and start my own business,i have a crease in my quarter panel,i'm going to fix it .Thanks a lot/ Man of Steel .
Manofsteelpdr.com
I appreciate your comment.
Well it’s an honor to get your first comment from you thank you.
When you hit the like button and post a quick comment it really helps propel my videos on RUclips
Keep me posted I do one on one training my emails in the link on my website
New Subscriber from Spain! Hello to everybody!
Welcome aboard Andreas!! Thank you for your comment!!
Very very impressive. Btw week ago I bought first PDR tools and now I watching Masters of PDR . There is long way from begginer to advance
Thank you Ola for your comment
New subscriber. I was so impressed How you managed to get The Huge dent out
Welcome aboard Dalton thank you for your comment
First time watching. New subscriber as well. I Inherited a shops worth of body tools/equipment from my Step-Dad who ran a shop for 30 years. I'm trying to learn as much as I can about the trade to prepare for a post retirement income. I can tell by just a couple of your videos that I have found the perfect place to start my journey.
Bjack welcome to my channel thank you for subbing
What was the cost of this larger pdr repair..?? Great job..!! Thank you..
Something like this when I’m saving the paint keeping the value of the car I charge right around 2K
That’s awesome, PDR is my passion, love the way those dents comes out smoothly.
I appreciate that Luis for sharing on my channel
New sub! You've got an amazing eye for detail and I appreciate your minimalist approach to replacing stuff when doing body repair.
Welcome aboard Rick.. thank you so much for your comment
Wow this guy is a miracle worker. Nice work.
You got my respect.
Thank you
I’m a new subscriber and when someone quotes me an outrageous amount of money to do a job I know I’m smart enough to do if I just had the tools, I buy the tools and do it myself. That happened today you’re saving me a bunch of money I can already tell you. And will be ordering your stuff. Thank you.
I'm new to your channel and after watching 2-3 video's, I'm totally impressed. Getting dents out is one thing, but even more impressive is how you remove the tabs, which are there for the purpose of pulling the dent's and yet, they're removed without further damage. Also, surely these panels must suffer some sort of metal fatigue of sorts, as you've no way of truly annealing them without damaging the paint. Still mightily impressive stuff.
Thank you Adam Orna for your comment.
You have a one time opportunity to get that panel straight you definitely don’t want to start warping it.. The manufacture paint is really durable it handles the hot glue really well
@@DentDiscountPDRBodyShop Hey, the 'man of steel', is a man of his word. A reply back straight after your working day is done. Maximum respect to you sir. Also I've recently had my historic Alfa Romeo, Berlina fall of the trolley jack only to be caught by the same jack and totally crush the sill on the front wing. I'm kind of certain that PDR can't be utilised solely, as it's actually torn the steel at the bottom point. By chance are you operating out of Florida? Just curious, as I spent a lot of time in Miami and Pt. St. Lucie.
Good day sir I'm pdr from Qatar can I know the name the type of glue you use
Awesome repair would like to see more repairs
Thank you Jessy for your comment it helps my channel grow. The more you comment the more videos I want to put up..Clark Ken a.k.a. Man of Steel
secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/
Sure do wish I could do that, I am a body man.forty three years and I have to say that you sir,,, ARE THE BEST,,,, I have ever seen.
Thanks for the invite...
Manofsteelpdr.com
Jeff I appreciate your comment.
Love it can you tell me where you got your pulling frame and tabs. Thanks so much unbelievable repair.
New subscriber. You are the man of steel . Best, most instructive vids on the web. Just getting started . Just got my tools, waiting for my rods. Planning to do this after I retire in about a year. Can't wait to get started. Got a bunch of stuff to practice on around here. Don't have your guns but then I'm 67 years old. I'll make out somehow. always do. Keep the videos coming and thanks.
Greg Martindale.
Manofsteelpdr.com
Very nice Greg I appreciate your comment.
lol bro! You can’t call this a dent! This is PCR!! Paintless Collision Repair. Crazy!
Thank you for your comment great comment I really appreciate it.
Clark, Ken Aka Man of Steel
Hi the man of steel honestly you’re the best trainer and the best teacher we respect to your skills and I really appreciate that you share your knowledge and skills with everyone
Have a good one
Perfekt. From Russia vith love.
Welcome to my channel thank you for your comment
Fantastic work. You’ve got a lot of skill and patience for this. Thanks for sharing your talent!
Thank you for your comment
I've subbed twice!! :) Nahhh kidding! Great work Pal, again!! Wouldn't mind trying my hand at this type of work, if only to mend my own VW, it attracts all kinds of idiot drivers and cyclists.
Again, great work!!
Manofsteelpdr.com
Thank you for subscribing
I appreciate your comment
Respect for this technique!
What surprises me however how it is possible to get a dent this big without any scratches?
It takes a very comprehensive approach to produce such perfection. I watched a few times before I appreciated the importance of the 3-tube light for inspection, for example.
Manofsteelpdr.com
Robert I appreciate your comment.
NEW SUBSCRIBER... dnt know anything about body work but enjoy your vids 🦸♂️ man of steel
Jeffrey welcome to my channel thank you for subscribing
New subscriber from Costa Rica !!!
Excellent job my friend !!!
I own an small auto body shop and your tools and skills make a huge difference !
Congrats !!!
Francisco from Costa Rica thank you for your comment
I'm highly impressed you are very skilled I've been doing body work for 35 years and I have never been able to master this skill you've mastered,I'm highly highly impressed, I will be watching much more of your videos. I've shared your page with all my buddies at The body shop and trust me we're all in aw. God bless and keep them videos coming
Manofsteelpdr.com
Robert I appreciate your comment. I just posted a really good new video. Thank you for sharing my videos
New subscriber. Unbelievable how great auto body repair techniques have advanced. I wouldn't have believe anyone could have repaired that dent to such perfection.
Manofsteelpdr.com
I appreciate your comment.
Thank you for subscribing
Much less environmental impact by saving those panels. No scrap metal, no new paint job. And a wonderful result. I subscribed.
A I'm a filipilino....also learn for pdr ...now I had a idea from..ma of steel...were open here in Saudi....of pdr.....your the man..of steel....
Personally, I appreciated your videos and way you are repairing car'dents
Man of Steel thank you a lot you are talent person GOOD LUCK
First time here. Good job. I couldn't even imagine how good it will came out. Now my turn.
Welcome aboard!! good luck my friend thank you so much for your comment
I am a new subscriber and my damage to my car is on my driver side quarter panel from top to bottom enough where it's pushed in on the bottom to the point my car is literally hitting and running my tire when I drive it when turning or hitting bumps I wanted to do my own pdr just because not of money reasons but I'm a diy love to learn need some or quite depends on tequnics to right tools for pdr kits I can get locally in phoenix arizona autozone or at harbor freight I have here or can I get it at a body shop supply chain here is my email carterbarbara47@gmail.com subject my name with pdr I'll send you a photo of my problem I know you prob busy not enough time but I hope to hear from you it's a doozy aka fucking challenge
Also I see you use glue what is the time on waiting before you do all the pulling is it right away or wait I'm a newbie
Nice work, sir. You know, the one whose name is on your right arm is going to fix this damaged world with similar passion as you do with this dent. Keep up the good work.
Manofsteelpdr.com
Thank you for your comment I appreciate it
New subscriber! Been doing bodywork for thirty years and ive always been intrigued by paintless dent removal. Maybe old dogs can learn new tricks. Thanks and Great job!!
Welcome to my channel thank you for subbing
Check out my new video. ruclips.net/video/uaYYtaU_dOY/видео.html
New subscriber!!! RUclips algorithm guided me to the master of pdr repairs. Keep up the great work in learning a lot from your videos and your techniques give me the confidence to tackle a big dent that I have on my personal vehicle.
Manofsteelpdr.com
I appreciate your comment
NEW SUBSCRIBER…I am absolutely AMAZED at the way you fix these dents to PERFECTION!!!
Sir ...my name shaji from India.I am dentar.... my experience 25 years denting and modification vehicle's...car and bus.....I not trying PDR.....I enjoy your videos great job..congratulations....God bless you
I can see why you are the man of steel nice work
Farty Marty thank you for your comment I appreciate that
My second video in and about to watch getting glassed, You have shown me the light, I;ve been making so many time and quality related mistakes. Thank you good sir
Very detailed,all the way to dismantling the tail lamp and bumper. Great video and dialogue
Thanks alot. Nice work and am I ever learning a ton and becoming more and more reluctant to practice on my favorite car. I am at the point of lacking confidence due to probability of using wrong tool with wrong technique.
PDR Trainer - Does it help to run your hand over the surface to determine what is needed or is the light all you need?
This man is a artist.
Thank you John
Amazing!!! I used to do body work and this is a new level of body work for me!! I am going to try to do that on some small dents that I have on my pick up.
Beautiful work . No holes drilled no heavy pushing . Definitely not a hail chaser
Clark, I just started viewing some of your clips. Your technical skills are exceptional. It takes many trial & error to master this trade, I know. I've been a collision tech for over 40 years, I've bought some of the PDR tools and still can't get it right. The key is Patience & lots of practice, which I have neither. However, It is awesome to see it done. Thanks for sharing...
Manofsteelpdr.com
I appreciate your comment.
Jazz hog thank you
My brother you are an absolute genius. Incredible skill. WOW>
Im impressed 💪🏻💪🏻💪🏻 Pdr for 22 years and no chance i will get that result 🙏🏻🇩🇰 Ricky NOPAINT from Denmark 🇩🇰
I've watched I few of you videos now. I'm extremely impressed. I've got a pretty rare car here in North America, common as dirt in Eastern Europe, but it's got al sorts of little dings that need this treatment.
Awesome PDR will be the way to go
Amazing work. Retired now, so would love to learn this for a hobby
You can always order a set of Tools and practice to see if it’s something you want to do
new subscriber. just sent you a message about learning so i can fix my wifes car. youre doing awesome work!!! thanks
I’m a new subscriber. I really like the way you explain things. I also like when you shoot videos from inside the panels so we can see what’s going on from the inside of the panel. I’m from Ontario Canada.
Manofsteelpdr.com
Thank you for subscribing
I appreciate your comment
The man of steel is a true craftsman. Holy cow, what a transformation.
Debndave thank you for your comment
New subscriber here!! I do body work for a living just wishing I could do what you do !! Simply amazing work !! I can’t stop watching !!
Scott welcome to my channel thank you for subscribing
incredible.. i never knew this art existed but you are a master
Wow tht was a big a dent!!!!!! U definitely get super hero status for saving tht dent
Right on thank you for your comment
I hope to learn alot off this channel my dad wants me to learn auto-body work I definitely will be tuning in thanks for your services n time
Welcome aboard my friend
I am a new subscriber and very fascinated by your artistic creative work and your selfless sharing. Deep gratitude
This repair is absolutely ridiculous, I can't believe you managed to get that damage out... incredible work, subscribed.
Manofsteelpdr.com
Thank you for subscribing
I appreciate your comment
I love these videos of dent pulling gives me faith with future projects
Thank you Old Boy for your comment I appreciate it..Clark Ken
secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/
New subscriber. I am getting ready to get into PDR repairs. I am working on building my way up to a shop. You are awesome your techniques are Heroic Man of Steel
Manofsteelpdr.com
Jeremy Thank you for your comment I appreciate welcome to my channel
Im a new subscriber... Ive seen a couple of your videos and your work amazes me. I learned auto body in high school in the votech venter and this pdr stuff is new to me. I wouldve been one to cut out replace the panel and do a traditional repair on this 1/4. I dont do body work anymore as Im a computer tech but I just did a diy job on my 11 impala that was totaled out. instead of using a chain to pull out the corsair, i used a scissor jack chained to a tree. i didnt want to risk doing further dmg to the airbags system and didnt want the curtain bags or others to be set off while tugging one out. Welp cheers nice to meet ya and congrats on those elite dent skills.
Like from Argentina. I thought it was harder. but you, you made it look easy.
. thank you Yoely for watching my videos.. your comments and likes really helped my videos propel to the next level
@@DentDiscountPDRBodyShop thank for you .for information
Man you're the king of dent removal
Egidio thank you for your comment
That was mint work! Had a couple of attempts on a beaten up track car which have turned out ok. I've attempted going from behind before but thats harder. Glue repair though, yeah. That job was fantastic.