Wow, I've been working metal for 30 years, and that save, and understanding of the plasticity of sheet metal is amazing. I don't know how old you are, but the only people I know with that understanding, is old timers. We didn't have lights back in the day. Great job man, continue crafting your skills
Hi Mike Great job I always thought when dents are stretched you need to use a sharp tip to gather the metal, to do it with blunt tips is truly amazing and proves that I learn something new every day. 👏👏👏👏👍
Thank you. To be honest, I passed on it at first. But client says he had nothing to lose by me trying. I didn’t want to drill for nothing but client really wanted to roll the dice. Luckily it was a win. Appreciate your attention. Thanks 🙏
That's great. Perfect example of when to drill. Way more informative than some load mouth call making an access point vandalism. Great finish. Nice work.
После града мой автомобиль был весь в таких вмятинах, и крыша, и бока. И мастер всё выправил. Теперь я понимаю, какая огромная работа была проделана❤❤❤ Но капот пришлось заменить: лунная поверхность лечению не поддалась😂😂😂
Honestly I can’t remember. This was like 3 years ago. So I’m guessing it was in the $500-$700 range. I also believed I wasn’t going to get it out. So I had to charge for what my time was worth whether I was successful or not. Thanks for asking too. 👍
Hi, your videos are great. I am a manufacturer from China specializing in various car dent repair tools. We have our own factory and can accept customization. Are you interested in considering products from China?😊
Have you ever worked on a super deep dent on this model in the same area? To answer your question, there wasn’t any backside access by removing the interior panel. I went between the brace and the skin. Thank you.
Wow, I've been working metal for 30 years, and that save, and understanding of the plasticity of sheet metal is amazing. I don't know how old you are, but the only people I know with that understanding, is old timers. We didn't have lights back in the day. Great job man, continue crafting your skills
Well said! I’m 53 but this video was shot a few years ago. Thanks
That was deep enough to get lost in! Great, intricate work; thanks for sharing your process. Fascinating to watch 👍
Hi Mike
Great job
I always thought when dents are stretched you need to use a sharp tip to gather the metal, to do it with blunt tips is truly amazing and proves that I learn something new every day. 👏👏👏👏👍
Thanks I’ve been a pdr pro for 25 years now I would have passed on that one great job bro
Thank you. To be honest, I passed on it at first. But client says he had nothing to lose by me trying. I didn’t want to drill for nothing but client really wanted to roll the dice. Luckily it was a win. Appreciate your attention. Thanks 🙏
Amazing! I have hard time fully grasping concept of the tapping down part.
Well where dents go that was a bloody crater , absolutely first class job, patience is key and you have it in abundance.
Thanks mate. Cheers 🍻
That's great. Perfect example of when to drill. Way more informative than some load mouth call making an access point vandalism. Great finish. Nice work.
Thanks I really appreciate your response. 👍🙏
Damn fine work. Thanks for the info
My mind is blown👌👍.
Well done sir.
No way ur an artist 🎉🎉🎉 excellent work
Loving the return of these videos
Heck yeah! 👍 thanks 🙏
Fantastic result as usual and very informative
Thank you. 🙏
Holy crap that thing was deep! Amazing job as usual Myke!
Appreciate it. Thanks.
Nice work. I've been doing collision work for over 20 years and always wanted to get into this
Nicely done Mike! Thats a tough DEEP stretched dent. 😳
Yes it was! Thank you 🙏
Esse amassado nessa região é um desafio! Parabéns pelo trabalho sensacional 👏⚒️💯
Obrigado! 😊
Wow magical work 👍
Appreciate the compliment! 😊
Omg😮 i like that way how you work pdr soo loved it❤❤❤ u r my hero
Thanks appreciate it
Wow , that is simply amazing!
amazing job , how much do charger for a dent like that ?
very nice as a dent guy in his fifty's I love the magnifying glass where can I get one???
That's impressive work. Talk about focus
Yes thank you!
Good information.thank you
That as inspirational. 😁
I have a dent about 1/2 that depth in the tailgate of my truck.
I would like to ask if you use this type of lamp, is it enough to do it from one angle or do you have to do the repair from several sides?
Wow, That was an amazing job, and one of the biggest mistakes I observe is when techs try to get it done quickly!!
Thanks Steph. You couldn’t be more right on rushing. 😉 👍
Amazing repair and without the paint letting go... cool..
How many hours/minutes did this repair take approximately ?
Woooo that was Deeep! Good work
Hello, how many centimeters are the lines and how many centimeters are they apart?
Perfect 👍💪!
Thank God you work in America, I've been in PDR for 20 years, if you made a hole in that position in Europe the client would shoot you for it.
I was thinking the same thing
Beautiful job. How long did it take you
Thanks. About 3 1/2 hours.
Очень хороший результат. Знаю что говорю. Сам занимаюсь 10 лет. Есть только один вопрос, сколько времени ушло на ремонт?
Thank you. 3 1/2 hours.
I’m interested in taking one of your courses.
Really amazing work!
Thank you! Cheers! 🍻
You can still see the line in the paint, good job removing dent
Amazing work
Wow that was amazing!! Coudl You tell me what board line do You use? Where i can find it?
The one I use is custom made but you can get one similar from Elimadent.com
What type of glue/gun do you use?
Bravo! How long did it take?
Thank you. About 3 1/2 hours.
Still see it but definitely saved a lot of time versus paint time
Yep but that’s the cause and effect when you get blasted from a shotgun coming through a wall with pieces hitting the car. 😉
Great job , I would have put a grommet on the other side as well so it looked factory for the nosey people asking questions
How much did that cost to remove that dent?
Heck yeah!! 🤩
Thanks Brandon.
После града мой автомобиль был весь в таких вмятинах, и крыша, и бока. И мастер всё выправил. Теперь я понимаю, какая огромная работа была проделана❤❤❤
Но капот пришлось заменить: лунная поверхность лечению не поддалась😂😂😂
😉 yes indeed. Lot harder than it appears 😉.
Increible trabajo.que bien
Can this be done with just glue pull?
Unfortunately no. It was way too deep.
How can we learn
Thats fkn amazing 👍
Glad you think so!
YOU ROCK BRA
Thanks! 🙏
4:05 the metal is tin canned ?
What did you charge for that ?
Отличная работа Майк, ты как всегда на высоте дружище 👍👍👍
Thank you very much. 👍
How long does it take to learn PDR?
It can vary. Usually about a year to get consistently good.
Your Videos 🙏 Are As Good As Your…Talent
What’s the silicone for?
Keep moisture from getting in.
Once I get the money I want to train with you one on one so bad.
Parabéns 💯
how much did you charge the client for this work?
Honestly I can’t remember. This was like 3 years ago. So I’m guessing it was in the $500-$700 range. I also believed I wasn’t going to get it out. So I had to charge for what my time was worth whether I was successful or not. Thanks for asking too. 👍
How to use the reflector in the sun when we don't see the lamp
I’m making a video about that soon.
@@denttime gracias
Masterful! That was a deep old dent and yeah, I figured a firearm was involved!
Thanks 🙏
Remove a dent, dig a crator 😅
What can cause this
You didnt use heat on this dent. How did u know that the paint aint go to crack on deep dent like that?
Türkçe anlatımlı video larınızdan atarsanız çok memnun olurum selamlar saygılar sunarım
Coba ada di indonesia...😢😢😢
Резальтат прекрасен, но дыра в кузове 😢негодится
Show me how there was another way to access the backside of the panel?
Todays 2k paint is hard and brittle.. it will crack. Acylic laquer was better paint 1930 to around 1985
Hi, your videos are great. I am a manufacturer from China specializing in various car dent repair tools. We have our own factory and can accept customization. Are you interested in considering products from China?😊
🔝👍👏
Exccelent!
Thank you! 🙏
可以拆飾版，為什麼要去鑽孔
Have you ever worked on a super deep dent on this model in the same area? To answer your question, there wasn’t any backside access by removing the interior panel. I went between the brace and the skin. Thank you.
A Chrysler 300 ? I thought it was a Porsche or Ferrari at first lmao