How To Make Drone With Hand-made Radio Control. DIY Drone

How to make quadcopter with arduino radio controller.
1806 Brushles Motors : s.click.aliexpress.com/e/_DEL...
Emax 12A Brushless ESC : s.click.aliexpress.com/e/_DE4...
PCB Boards: s.click.aliexpress.com/e/_DEq...
Standoff Spacer : s.click.aliexpress.com/e/_DEY...
4045 Propeller: s.click.aliexpress.com/e/_DEI...
3S Lipo (800-1300mah) : s.click.aliexpress.com/e/_DCA...
2mm gold Connectors: s.click.aliexpress.com/e/_DE7...
T-Plug Connector & Cable (Male) : s.click.aliexpress.com/e/_Dl9...
2 Pin JST & Cable : s.click.aliexpress.com/e/_DmR...
KK2.1.5 Flight Controller Board : s.click.aliexpress.com/e/_Dkg... OR s.click.aliexpress.com/e/_DFF...
M3 Screw: s.click.aliexpress.com/e/_DmW...
M3 Nuts: s.click.aliexpress.com/e/_DBW...
Cable Stripper : s.click.aliexpress.com/e/_DD5...
Lipo Battery Charger: s.click.aliexpress.com/e/_DF5... OR
s.click.aliexpress.com/e/_Dlw...
How to make 6 CH Remote Control video : • DIY 6 Channels Radio C...
Thanks for watching. If you want to support, join this channel.
/ @kendin-yap
Connection Schemes: www.rcpano.net/2020/06/18/how...
#drone #quadcopter
00:00 Video introduction
00:09 Making
11:18 KK2.15 Board setup
13:15 Radio control test
14:34 Flight
All of my videos: bit.ly/2Z9QVYK
Thanks For Watching And Please don't Forget To Like, Share & Subscribe For More Awesome Videos.
KendinYap Channel ruclips.net/channel/UCgjJ...

[@juliocesarvelandia3386]

Que trabajo tan elaborado.
Un Dron casero y quedó genial.
Espero que cada ves sea más fácil de hacer.
Saludos desde Cali, Colombia.

[@LucasSantos-zd6sv]

Parabéns, excelente . Eu vejo empresas fabricando drones que não tem 1% da qualidade de voo do seu drone perfeito. muito inteligente

[@SamanKumar-py3kc]

Iwpp2900😅😮❤

[@koraykarakaya5506]

Hocam geçen bu video sayesinde dronumu tamamladım.Mühendislik tasarım ödevimdi ve hocam çok beğendi.Kendimi mühendis gibi hissettiğim bir projeydi.Çok teşekkür ederim size çok şey kattınız.Var olun...

[@huzaifaazhar6285]

Your WhatsApp???

[@batuhan8465]

lisede misisniz

[@Arap_Hoplatann]

Hangi alıcıyı tercih ettiniz ben videodakinden bulamadım

[@Peynir12]

Koray abi 16 yaşımdayım robot yapımı hakkında hiçbir bilgim yok kendi basit fikirlerimi hayata geçirebilecek kadar öğrenmek istiyorum nasıl başlamam gerektiğini anlatabilir misin

[@MehmetEmre_1]

​@@Peynir12Kardeşim seninle aynı durumdayım bende

[@user-rl1si5js7y]

Always wanted to make my own drone, glad I found your video bud! Very well explained, although now that I realize I don't think you said a single word the entire video 😆 either way instant fan of your work and now Subscriber to your channel, Sir. Keep up the awesome work!

[@mehmetbatuhanarslanturk1661]

Harika bir kanal keşfetmenin zevkini yaşattınız teşekkür ederim. Sesinize yer vermemişsiniz ama keşke sesli anlatımınızdan da mahrum kalmasaymışız. Emeğinize sağlık.

[@anatolyivanov890]

This controller board has more settings than iphone.

[@starshiphopper7044]

😂😂😂

[@f.hfarhansiam6589]

😂😂😂

[@sahildvrma8155]

😂😂😂😂

[@Lenstsky]

That's really

[@codinglife4937]

Do you know what an iphone is

[@hughslaven4738]

This is a brilliant video. Makes it very clear how to go about building one.

[@aliyildizcelik4657]

Yine muhteşem bir video. Teşekkürler hocam.

[@ismailkalkan2383]

Hoca ,eline koluna sağlık ,,bizleri çook bilgi sahibi ediyorsunuz ,tesekur ederim

[@omerfarukbuyuk5176]

hocam yıllardır bu işleri takip ediyorum ilk defa delikli plaketten frame yapan görüyorum gerçekten çok etkili , pratik ve ekonomik bir çözüm ellerinize sağlık

[@user-pb4sg3qj5m]

Salut je m'appelle

[@dariuszdabrowski3876]

Świetna robota, jestem pod wrażeniem tej budowy drona. 🤯

[@jefersonbarros4376]

I'm from Brazil, congratulations and thank you!

[@cantorCLAUDIOsallum]

I'm Claudio Sallum from BRAZIL AND I'M ALSO an instant fan of your work and now a subscriber to your channel, sir. Keep up the amazing work!

[@brume1517]

Türkiyede böyle bir kanal olması heyecan verici.

[@mucahitaskan95]

Çok etkili, pratik ve ekonomik bir tasarım ellerinize sağlık.

[@merttekin4085]

Hocam kanalınızla bugün tanıştım. Bir mühendislik öğrencisi olarak takdir ediyorum emeklerinizi. Elinize sağlık, dilerim çok daha iyi yerlere ulaşırsınız.

[@alperengul2578]

ne mühendisliği okuyorsun abi

[@turkeditysf]

@@alperengul2578 sağane

[@AlphaGamersLOL]

starting now

[@AlphaGamersLOL]

Translated Message is Sir, I met your channel today. As an engineering student, I appreciate your efforts. Good luck, I hope you reach much better places

[@Murat13_45]

@@alperengul2578 bahçe mühendisi

[@danielcarlos5285]

Parabéns pelo vídeo 👏🏻, aprendo muito com você

[@samuelanderson2709]

hi daniel carlos
this video is in english,but you speak in portuguese

[@evertspies3345]

Very well done. Using basic components you constructed a great flying drone. I must add that the pilot makes it look easy.

[@willempje65]

You are showing the fun about building from "scratch", instead of ordering something already made or so.
Nice 🙂

[@carleennnn]

It’s more fun and it makes you feel like a nerd (in a good way)

[@keitharoo1962]

That is amazing! The only issue I can even see is accessing the screws to replace a broken arm. Nice drone!

[@NatureAndMusic]

İçerik ve donanım alt yapısı olarak çok başarılı bir kanal tebrik ederim.Basarilar dilerim devam ederseniz daha iyi yerlere geleceğimize eminim.Yerli bir kanal olmanız dolayısıyla ayrıca gurur duyuyorum.

[@innocentdoggo6106]

this guy deserve a medal :D
Thx for tutorial

[@svllal.cornelivs2443]

wow this drone sounds like a Tie Fighter!!

[@meshackcommey5157]

Well done, always ready to learn more from you, great job with yield understanding

[@vinayakk2745]

Wow! That's so stable

[@h7productions286]

Everywhere I go,
I see his face.

[@KG-xo6iq]

eyes: I got it, I can make.
hand: no,you cant!

[@gway_lo]

Süper olmuş, eline sağlık hocam.

[@fefpv5001]

it actually fly pretty decently.. great job !!!!

[@RandomBrainyRecordings]

@kendinYap I love your videos, these are simple but very explanatory. Could you please make a drone or plane which streams live video stream to a mobile app using data cable as commercial drones do. They use the same remote control and a data cable to attach with a mobile phone to record live video. I watched an FPV video on your channel too but it was streaming the video to another receiving screen but not to the mobile app. Thank you in advance for your guidance and help.

[@ggimas]

Cutting and drilling FR4 (pcb board) is dangrous for your health because it produces glass powder (FR4 is fiber glass). If you inhale that, your system cannot get rid of it so it accumulates (similar to asbestos) . In general cutting and drilling FR4 is a "big no no" in elecronic assembly labs(use a PCB gillotine for cutting it). When it cannot be avoided, it is recomended to be done eithe in water, or with wet boards (so that the powder doesn't fly off).

[@user-rk6to3zd7e]

Thanks for reminding

[@thatstupidartist3410]

Thanks

[@raghav1502]

the pcb he is drilling in the video is paper phenolic no glass epoxy

[@rohanhazarika2587]

As an odiance bro i loved your design and tutorial of making aeroplanes with its circuit connection

[@the1andonly]

This is really cool. Now I want to build one too. Your video is very detailed. I would have loved to hear you explain the steps in a voiceover, but this will definitely help. Thank you!

[@oylesinebirhesap211]

He is Turkish. If that guy had done the voice-over in the video, it would have been in Turkish.
Maybe that's why you don't understand conversations.

[@davidogbodo1061]

@@oylesinebirhesap211 why the rude response?

[@AnimilesYT]

If you have some video editing ambitions then I may have an idea for something you could try.
At 0:50 you have the measurements for the board, but you rotate the board while the measurements stay in place. It would be cool if the measurements would follow the board and rotate along with it. This could be done tediously by keyframing every frame individually, but some video editing programs also have tracking features which allow you to make it follow the pcb's position and rotation automagically.
I think it would look cool if it were like that, but it's absolutely fine the way it is. So if you don't feel like doing something like that then that's totally fine :D

[@nusretharisozmen3875]

Bu tür videoları bir türkün de çekmesi bizi çok mutlu ediyor.

[@cagantuanafan3237]

Aynen

[@parasever]

Çook iyi fikir helal olsun 😀👍

[@electronic7979]

Elinize sağlık 👍 mükemmel

[@asadmuqtar2123]

This is a great video and thank you teacher

[@nettypets]

Very clever and good luck on anything you build next. The Hoppers, down under. (Australia)

[@premkumarms1772]

Mannn that is awesome and im following your video to make my own. Ill really appreciate if you could add an oled display to the transmitter really liked it maann

[@crocodile6096]

Did you make it by now?

[@yasincetinkaya691]

Abi mükkemmel çalışmalarının devamını dilerim dolar uçmuş ben kumanda bile alamiyrum

[@efelektriktv2520]

Reis harikasın bee

[@ibrahimasc7871]

Güzel çalışma, beni abonen yaptı.

[@abdullahkarabulut118]

Abi böyle şeyler görmek çok güzel 👏👏👏

[@markcloudchaser874]

I can't believe what I have just watched, That was awesome. Well Done 👍 Good Job 👊💯

[@consolataromano8455]

🖒🖒🖒🖒🖒

[@TheRecep27]

Daha iyi bir uçuş kontrol sistemi ile freestyle drone videosu bekliyoruz

[@arbeliroz]

Damn. I heard they're looking for a new CEO at DJI

[@jjab99]

Very well done indeed!!!

[@kablamaksulin8468]

Bu kanalı 300 abonesi oldugu zamanlardan beri takip ediyorum bu kadar buyuyeceği kalitesinden belliydi zaten yine mukemmel bir iş çikarmişsin hocam kolay gelsin

[@sastrydasigi7010]

Impressive build, educational and entertaining!

[@geberrrrrrrrrrrrrrrrrrrrrr]

vay maşallah bugün başlarsam yaz sonuna kadar ancak bitiririm ben. Kappa :D :ADS

[@talhaserin6109]

Bitirdin mi kardeşim merak ettim 😂😂

[@geberrrrrrrrrrrrrrrrrrrrrr]

@@talhaserin6109 yapamadım :S

[@talhaserin6109]

@@geberrrrrrrrrrrrrrrrrrrrrr sağlık olsun 😂😂

[@josepcivil8090]

Thank you for your generosity in sharing your expertise! From Barcelona.

[@JoaoPaulo-rw8gj]

Gostei!!! Parabens!!

[@tomatnyamuq]

thanks master yoda.. greeting with big honours from indonesia.. 🙏

[@ANDRE-en6nx]

Tenyata ada yg dari indonesia

[@ananproject451]

Aku juga dari Indonesia

[@dostyogurt3294]

all we are muslim brothers

[@shehandevinda2978]

I APPRECIATE YOUR TALENT SIR,RESPECT SIR,I'LL MAKE DRONE BY UR VIDEOS

[@cindybindreiff6886]

Merci beaucoup mon frère adoré tes vidéos 💔😘😉😉😉😉😜😜

[@oguzhanbayram9224]

Hasan Hoca'dan geldik

[@volkandeniz0048]

Emeklerine sağlık...

[@shayandutta10]

really loved it and learnt a lot. One doubt though, whether the transmitter and receiver is the same one that you made earlier in different video(the 6 channel transmitter)? And another question, will you make a arduino based flight controller for the same? thank you for the videos and love from India.

[@Kendin-Yap]

The basic principles are the same for both. But there are some differences.

[@swastikdas1876]

@@Kendin-Yap Can you please elaborate what are those differences? The receiver in this case also doesn't use PPM ouput. I think earlier ( 6 channel receiver in your video) and in present case, both are receivers with PWM output.

[@nidasama]

Hocam esc gibi bazı elemanlar çok pahalı.
eski sayılmayan bir drone inceledim, kücük tek devre ile kızılötesi yardımıyla motorlara bağlanıp kumanda ile kontrol ediyordu.
bunun için detaylı bir video çekebilirmisiniz?
wifi modülü ile olabilir, nrf24l01 ile olabilir, sp8622 ile olabilir.
saygılar

[@CHOUWEAPP]

Congratulations! Good job 👍🏻

[@RudyHermawan]

Please permission, I am sharing this video for learning. Thank you

[@ilhanaltntas6106]

Abi 3D yazıcın varsa kendin bir özel tasarım yapıp rc uçak yapabilir misin

[@maketci3d366]

Aynısını dicektim

[@deepL0]

Aynen 3d yazici boyle maketlerde cok is gorur

[@turkeditysf]

Rc yapmak öyle kolay değil mesela f22 raptorun rc sini yapacak onun için mini turbo jet motoruna ihtiyacın var anladığım kadarıyla reis elektronikden anlıyor motordan pek anlamıyor

[@elishama_]

Cool tutorial thanks bro!

[@Potso0217589R]

You truly deserve a medal Sir. Fantastic work. 👌

[@tabutcureis7039]

It's a bit difficult especially the body lol

[@mehershah3240]

Very difficult

[@gurkanarkas2374]

Hocam merhaba, videolarınız çok kaliteli yürekten tebrik ediyorum. Ben internette bu eski oyun kolları (joystick FT Aviator gibi) ile drone kontrolü yapmak ile ilgili araştırmalar yapıyorum ancak bulamadım. Bir örnek çalışma yaparsanız harika olurdu. Başarılar dilerim 👏👏👏

[@mehmetbatuhanarslanturk1661]

Eski oyun kolları ile olur mu bilmem ama Unity oyun motoruna biraz hakimseniz, Arduino ve Unity arasında Serial Port üzerinden entegrasyon yaparak modern oyun kolları ile kontrol sağlayabilirsiniz. Ben de taze bir yazılım mühendisi olarak tamamen el yapımı bir drone yapma işine merak saldım. Yazılımını yazmayı gözüm kesiyor da işin donanım kısmı, uçuş fiziği vesaire falan hala soru işareti. İyi çalışmalar dilerim.

[@yunusbilece8690]

@@mehmetbatuhanarslanturk1661 usta uçuş kontrol kartının frameworkleri filen internette var mı ? kendi kendine rota belirleyip bu rotayı gidebilecek bir drone yapmayı deniyorum da nereden başlıyim ?

Harika, elinize sağlık

[@rcmodelucakhk8017]

Tebrikler eline emegine saglik👍

[@koolgadgetsreviews1200]

No GPS? Why the setting is loaded with lots of info than huawei 😂

[@ribikabasumatary8045]

Good morning boys

[@architabiswal5020]

I suggest that if anyone want a drone, then buy😂🎉
That is easy and less expensive than it 😊🎉
But the man did amazing work 😉👍👏

[@DungarooTV]

Just simply amazing!

[@telum2265]

Maşallah harika olmuş abone oldum .

[@kmhooibg7577]

huh where do i find these pro materialsssss 🤣

[@Morkorio]

Thank you for this video. I really got inspired by your work and want to make one for myself!

[@unclemarky3]

hola muy buen video espero que permanezcan haciendo este metarial... Voy a seguir mirando sus creaciones. Les mando un beso nos vemos luego ❤️👍🏽

[@mohamedhaidara9886]

je teme

[@vdm7776]

Thanks for amazing tutorial!

[@bluemaz6]

Dang, still using a KK board....

[@181730]

The drone is SUPER cool

[@salihyildirim704]

Merhabalar, Receiver'ın olduğu plaketin bağlantılarını detaylı anlatabilir misiniz?? Teşekkürer ederim, çok güzel olmuş. İyi çalışmalar

[@danielagbaiokorie5288]

Nice. I'm trying to make mine too.

[@AftabKhan-pv4xm]

All the best

[@ittachidz5371]

Can you explain to us the way to make a drone with Arduino Uno and the code?

[@yassineseghrouchni8175]

The code is easy you can code it yourself

[@ittachidz5371]

@@yassineseghrouchni8175 hi can you help me ?

[@l-l-k2186]

很厉害啊!!!!

[@DoItYourself-DIY]

Great Drone

[@chinthajeewani6459]

Kendin yap,
Teach me how to make a remote control submarine, only you can do it , no one else can do it ,
I hope you will make it beautiful with diagram like you other videos
THANKS 🎥🎥🎥🎥🎥👌👌👌👌👌

[@user-no2hp9sr3l]

very very very very god

[@afdsd]

Sir, your videos are amazing, love everything here

[@mofaksalman3391]

well-done, great, fantastic, superb, amazing and fabulous work, you should modify it and make it more commercial and really you are great and smart engineer, Elina saglik, Saygilart, Irak, Kerkuk

[@angelbythewings]

Range 130-150 metre, flying duration ~5-6 minutes with 800mAh, up to 1300mah can be used. Found it from the answers in comment section

[@funnyman6050]

Hi

[@techdatamexico4530]

FASCINATING !!!

[@user-qu6cn6jo2h]

Great work and effort behind the project ....

[@rowanberino838]

Can you build cheaper than this cause i can't afford this pls
Then give me a link

[@sajalacharjee7008]

You can order this from jlcpcb .

[@user-watermeloncat]

ძალიან სასარგებლოა ჩემთვის, მადლობა

[@tiefsoftwarelab]

hello new friend thank you for share have a wonderful day

[@ati8322]

Seni tebrik ederim çok faydalı video.demeki bizim insanımızda böyle şeyler yapabiliyor.senin videoların örnek olsun bir çok faydasız ve boş işler yapan sosyal medya daki avanaklara

[@ENES-ce8js]

hocam çok güzel yapıyosunuz biraz daha kolay malzemelerle yapsanız olur mu

[@agentc6317]

cool dude love the saw how did you make that ? id like to build one :oD

[@bayramefebozac681]

reis bunun malzemelerı zaten bir dron fiyatı eder elıne koluna sağlık türkiyede teksin seviliyosun

[@gokturk7914]

Kanka amaç dronu ucuza getirmek değil.d

[@droneorstudy6044]

i love ur all videos thank u