How to Make Super Simple RC Airplane With Handmade RC
HTML-код
- Опубликовано: 11 фев 2024
- I used 3 servos for this model. The model can take off and land from short distances. That's why the nose wheel is fixed. A rudder is also not required on this model. Since there is no rudder, servo cost is reduced. And the flight weight is also slightly reduced. The model is structured as simply as possible. But it has a stable flight. It can also fly at low speeds. It is also suitable for beginners.
If you like my projects and want to support me to make them sustainable...
Patreon: patreon.com/KNDYP
2212 1400 Brushless Motor: s.click.aliexpress.com/e/_Ddc...
Propellers: (2-Blade 8x4) s.click.aliexpress.com/e/_Ddl... OR (3-Blade 7x4) s.click.aliexpress.com/e/_De5...
30A Brushless ESC: s.click.aliexpress.com/e/_DED... OR s.click.aliexpress.com/e/_DCg... OR s.click.aliexpress.com/e/_Dej...
LiPo Battery 11.1V 1300-2200mAh: s.click.aliexpress.com/e/_DBm...
35-40mm wheel (3 pcs): s.click.aliexpress.com/e/_DlC...
Micro servos (3 pcs): s.click.aliexpress.com/e/_DmZ... OR s.click.aliexpress.com/e/_DlZ...
Gold Connectors 3.5mm: s.click.aliexpress.com/e/_Dmx...
Wheel stopper (3 pcs)(2.1mm): s.click.aliexpress.com/e/_DCc...
Y extension cable: s.click.aliexpress.com/e/_Deg...
Adjustable Linkage stopper (3 pcs)(1.8mm Easy Link): s.click.aliexpress.com/e/_Dkv...
Pushrods: s.click.aliexpress.com/e/_DFa...
Canopy Hatch Lock: s.click.aliexpress.com/e/_DE3...
Fiber Strips Adhesive Tape (25mm): s.click.aliexpress.com/e/_DlM...
Fastener strip: s.click.aliexpress.com/e/_DnN...
M3x8mm screws: s.click.aliexpress.com/e/_DCB...
5mm Kraft Foamboard (2 plate)
Lipo Battery Charger: s.click.aliexpress.com/e/_DF5... OR
s.click.aliexpress.com/e/_Dlw...
Runcam Camera: s.click.aliexpress.com/e/_DkH...
Hot melt Glue Gun: s.click.aliexpress.com/e/_Dln... OR s.click.aliexpress.com/e/_Dl2...
If you don't want to use handmade RC:
4 or 6 channel radio control system: s.click.aliexpress.com/e/_Dkv... OR
s.click.aliexpress.com/e/_Ddu... OR s.click.aliexpress.com/e/_DCP...
Some of the shops that sell Kraft Foam Board:
www.amazon.in/Pacon-Water-Res...
pacon.com/board-480/water-res...
tinyurl.com/4ups272k
www.foamboard.shop/en/foamboa...
www.enasco.com/p/Pacon-Water-...
www.mwmaterialsworld.com/es/p...
How to Make Remote Control (VIDEO): • How To Make 6-Channel ...
Thanks for watching. If you want to support, join this channel.
/ @kendin-yap
DIAGRAMS and DETAILS: www.rcpano.net/2024/02/12/how...
Technicial Specifications:
Lenght: 86 cm (33.85 inc)
Wing span: 88 cm (34.64 inc)
Flight weight: About 419gr + battery weight
Center of gravity: 6.9 - 7cm from the front of the wing
Required control system: Min. 3 channels, 3 micro servos
Suitable battery: 11.1V 1300-2200Mah
Suitable motor: 2212 1400KV Brushless Motor
Suitable propeller: 2-Blade 8x4 or 3-blade 7x4
Flight Time: Approximately 10-20 minutes
Vbar: 0,701
My Web Site (KendinYap): www.rcpano.net
All of my videos : bit.ly/2Z9QVYK
Thank you for watching. Please Remember to Share and Subscribe for More Amazing Videos.
#rcairplanes
#modelairplane - Хобби
🙂If you like my projects and want to support me to make them sustainable...
Patreon: patreon.com/KNDYP
RUclips JOIN: www.youtube.com/@Kendin-Yap/join
Hangi linkler ile sorun yaşıyorsunuz? Malzeme linklerini kontrol ettim ve hepsi çalışıyor. HTTP ile başlaması ile ilgili sorunu anlayamadım. Bunlar Short URL lerdir. tinyurl nin kısaltmaları http ile başlar. Sorun nedir? Detay verebilir misiniz?
@@Kendin-Yapis it ok to use ams117 on ebyte mdl05? I just add 2x 100uf?
❤❤❤❤❤👍👍👍😍😍😍
How big is 1 plate of foamboard plassen respont and i wil build it
50x70 cm@@stanbosgoed03
what a time for a RC hobbyists has the last 15 years been when RUclips has provided a platform to hobbyists share all kind things they do to others...
Thank you for publishing this! I have tried this design. Of course, mine did not work as good as yours but I am making a second try. I suspect I had a faulty wiring, and one of the servos for the ailerons got disconnected. I had a bad crash at a second attempt of flying but it was my fault. Anyhow, it is a fun design and for me, a junior in this hobby, is a great example of how to create something that flies. Best of luck and thank you for the work you publish!
Very cool! Reminds me a little of the OV-10 Bronco. Greetings from Switzerland.
i love you for this,, true DIY heaven
finally the rc plane builds are back!
Very much low budget plane bro thanks for 💡 Idea and support from India 🇮🇳
Как же это здорово, когда есть время и место для изготовления и запуска моделей! И самое классное, что чуть ли не за пару часов можно собрать подобные модели!
Great Skill, thank you for your brilliant constructions !
Nice OV-10 Bronco! 😁👍👍🇺🇸
Brilliant design and simple.
Thanks👍
Wow this is amazing aircraft ❤
I love your tutorials. I'm so glad that you wrote in the description all things needed to know. Thank you for yor adventage. I will use your project in a tournament in my school. ❤😅
Great,new model
Crazy that plane is crazy man
selam abi senin bu uçağın ölçülerini 1.6 ile çarparak 140 cm bir kanat uzunluğu olan halini yaptım ve çok güzel uçuyor
kullandığım motor 2217 1250kv 10x6 parvane 3s lipo pil ama karbon boru ile kanata ve arka kuyruğu tutan yere güçlendirme yapılması lazım
Very simple aeronautical engineering. I like ur landing too, I was expecting the wheel to come off. Better than BOEING.
Brilliant as always thanks the great ideas.
Très bien fait
Absolutely smashing.
Awesome!! 🎉
eline sağlık harika olmuş,kontrol mesafesi ve havada kalma süresi ile ilgili bilgi verebilir misin
Kumanda menzili yaklaşık 2km. Uçuş süresi pile ve kullanıma göre değişir. 10-20 dakika aralığında
Her zamanki gibi mükemmelsin hocam
amaziiiing👍👍👍
Wow.. really nice 👌
Nice sir I am from Punjab. India
very useful thanks
Her zamanki gibi mükemmel olmuş
Use magnetic suspension in wheel for soft landing 👌
I love this
More videos for beginners too
Amazing
Good man
Hay và được đó bạn
How very cool!
could you please give more info about the RC and the electronics thankyou
impressive
Abi eline sağlık idolümsün
Great skill sir, very ecco projects 👍from:India 🇮🇳
Kral❤
Aferin sana! Cok guzel bir proje! Tebrikler!
Good🎉
Hay quá bạn
Nicely done
great video.
awesome
Just subcribed your channel...pls continue on making the video. It's very helpful
Thanks. All links are below the video. Click "more" or "show more"
Nicely done! :)
Achei muito bom o projeto... Vou tentar fazer, mas no controle penso em colocar potenciômetro deslizante pra controlar o motor, o joystick é muito cansativo e tem mola, não fica numa posição só.
amazing
looks like TB-2 ;)
Harika bir video daha kral abim
Wow😮
thank you!!
Bravo
Now make a mq9 reaper with fpv turrent
fantástico
amazing.. reminds me Bayraktar TB2
Just scale to 10 times
Great @
Hocam yine fevkalade bir video❤
Top👏👏👏👏
Hocam sözleri örnek alarak kendim de bu alana atılım yaptım. Kanalında sizler gibi paylaşımlar yapacağım. Teşekkür ederim buna sebep olan kişilerden oldunuz
videolarını çok beğeniyorum her videonla ufkumu açıyorsun.Hocam youtubede bazıları fırçasız esc devreleri yapmış ırfz44 mosfetler ile bunun hakkında bir video yapabilirmisin
❤
❤❤❤❤
👍👍👍
great@
nice !
muito bom
❤❤
That's cool. Hiw high can it fly ?
Kendi yaptığımız kumandalarda E01-ML01DP5 modülü antensiz ne kadar çalışır? Anten elime henüz ulaşmamışken denediğimde 1-2 metrede bile aşırı sorunlu çalışıyordu. Veri gecikmesi ve elektriksel gürültü gibi sorunları nasıl çözebiliriz? Bunlar hakkında video gelirse harika olur!
Antensiz menzil son derece düşüktür ve antensiz uzun süre çalıştırmanız tavsiye etmem. Bu aşırı ısınmaya ve bozulmaya sebep olabilir.
First🤟
You are my best channel from RUclips
I'm impressed you
👍👍👍❤️
Best project that I have ever seen. Can I use 1000kv brushless motor with propeller 1045 in this model ?
10 inch propeller is too long for this model. But you can use 1000KV and 9x6 (9060) propeller.
Kiidna looks like the turkish tb3
Guessing this is still the cheapest way to get into RC 🙂
Great.
What autopilot did you use?
I don't use autopilot. Manual flight.
abi mükemmelsin
Çok güzel olmuş emeğinize sağlık. Bu uçağı orantılı bir şekilde büyütebilme imkanımız var mı?
Daha güzel böyle model uçaklarınızı bekliyoruz.
Evet büyütebilirsiniz. Ama kanat tek bir katmandan oluştuğu için çok büyürse bükülebilir. Ekstra destek ihtiyacı olacaktır. Karbon çubuk gibi.
@@Kendin-Yap klasik model uçaklarda yaptıpınız kanatlar olur mu
Evet olur. Ama düz kanat, airfoil e sahip kanat kadar verimli değildir. Bu yüzden büyük uçaklar için tavsiye etmem. Burada amaç hobi amaçlı basit ve motajı kolay, düşük maliyetli bir model yapmak. @@the_Efe
@@Kendin-Yap biraz daha gelilmiş bir şelilde olmasını istediğim içim öyle yapmak istedim düz kanat yerine başka ne önerebilirsiniz
Your project is very very GOOD and the plane fly with stability , what is the maximum RANGE for your transmitter ? It's fly sky or what? ...
About 2 km .. ruclips.net/video/dWq09vtc0WM/видео.html
🎉🎉🎉❤❤❤👍👍👍
Hey guys if you are having problem with motor mount you can even use a pvc pipe snd straighten by it to make the motor mount
iyi video.
Little tb 2. How do you create lift? Your wings do not have airfoil shape.
Nice project ! Can we use 2 motor to x2 speed ?
There may be some speed increase, but not 2 times. For high speed, a slightly larger motor with a higher KV value can be used. But this model is not suitable for 2 times the speed anyway.
Have you ever thought of making some flying wings?
Can I replace the 2300kv motor and still keep the 30a esc?
Yes you can. And the propeller must be suitable for 2300KV motor.
uçak yapısı gereği fpv için uygun gözüküyor içine takılacak bir fpv sistemini taşıyabilirmi düşünceniz nedir?/// it looks like this plane is suitable for a fpv system can it carry the weight of the fpv system
Küçük bir kamera ve fpv vericisini taşıyabilir. Üzerine koyduğum RunCam II kamera yaklaşık 50gr dı ve uçuş karakterini etkileme di. FPV kamera ve vericileri genellikle toplam da 25-35gr dan fazla değildir. Yani sorun olmaz.
Can you pls make the tx and rx on a zero PCB board 🙏🙏
Bro plz make a 8ch transmitter useing stm32 microcontroller
Çok beğendim. hemen like atıp abone oldum. Kumanda mesafesi ne kadar?
2000 metre+
If only they told me that this is what you use those small engines you get in 5th grade physics class for...!
Yeah bro
Hey according to you what is the range of flysky ct6b? and which is better to make nrf based radio receiver and transmitter or to buy one commercial and only one more question is their mix setting in flyksy ct6b thanks.
This is a great video. I just have one question. How do you generate lift with a flat wing (not an airfoil)?
Airfoil is very important for increasing efficiency, but it is not essential for flying.
Hey, I am a begginer, and I have never made a rc plane before. Which video you recommend I watch and make using cardboard
First of all, it would be useful to watch this video... ruclips.net/video/zf1eud0LRKc/видео.html . For basic terms, equipment, etc.
And it is one of the models suitable for beginners.. ruclips.net/video/LzZ4Oqk_J1Y/видео.html
@@Kendin-Yap what can I do when the plane gets really heavy?
اخوان اتعلموا وهاجموا 😂😂😂
Can use depron instead of photoblock?
Yes it can be used.
I have built 6ch transmitter and receiver with Arduino and I'm also thinking to build flight controller with Arduino can i use both in same drone? Will it work? Or not? I'm confused however I'm gonna try but I'm just curious 🤔
Next time CESSNA 182 rc plane build video please 😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😊