2000 - 2006 Chevy Tahoe Remote Key Fob Programming - How To Pair Program Chevrolet Fob
HTML-код
- Опубликовано: 21 июл 2024
- A DIY video tutorial on how to program or pair a remote key fob to a 2000 - 2006 Chevy Tahoe. You will need an ignition key and all of the key fob remotes you want programmed to the Chevrolet Tahoe in order to complete this programming procedure.
To program or pair a remote key fob to your Chevy Tahoe:
1. Close all vehicle doors.
2. Insert the key into the ignition.
3. Hold down the power UNLOCK button on the driver’s door panel-continue to hold down until instructed to release in step 9.
4. Perform steps 5 through 8 in fairly rapid succession.
5. Turn the ignition switch to the ON position (as far as you can go without starting the engine).
6. Turn the ignition switch to the OFF position.
7. Turn the ignition switch to the ON position.
8. Turn the ignition switch to the OFF position.
9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically.
10. Hold down the LOCK and UNLOCK buttons on the remote key fob simultaneously until the door locks and unlocks. This step may take up to 30 seconds.
11. Repeat step 10 NOW for each additional remote key fob (including any existing fobs).
12. Turn the ignition switch to the ON position in order to exit the remote programming mode.
This programming or pairing procedure applies to the following models of Chevrolet Tahoe:
2000 Chevy Tahoe
2001 Chevy Tahoe
2002 Chevy Tahoe
2003 Chevy Tahoe
2004 Chevy Tahoe
2005 Chevy Tahoe
2006Chevy Tahoe
DIY keyless entry remote fob and smart key programming instructions available at www.ProgramYourRemote.com/
DIY Ignition key programming procedures available at www.ProgramAutoKeys.com/
Find a Locksmith in your area with www.LocateALocksmith.com Авто/Мото
It didn't work
Thank you worked exactly how explained on my 06 Tahoe
You're Welcome! Glad it helped
Great helpful information. Worked just as video information contained. Thanks
You're Welcome! Glad it helped
It worked! I’m so tickled, 😊
Great information given by you! Thankyou!
You're welcome!
🎉Work exactly as explained on the video ,thanks a lot my new friend 😊
You're Welcome! Glad it helped
This helped me, Good video 👍🏼
Thanks! Glad it helped
Nice, this its the razon why like my old tahoe just simply
Worked perfectly thanks a lot
You're welcome!
👍Very accurate instructions 🌴
Thanks a lot Boss 👍
You're Welcome! Glad it helped
Play video thanks for the info Could you do this if you have a aftermarket alarm that the fob key doesn't work will not unlock doors unlock button broken
Thank you so much 🤗
You're Welcome!
Ok so i just bought the keyfob i need. I put my truck in programming mode, then press and hold both lock and unlock it connects then i put my ke in the on position and it doesn't go out of programing mode
Thanks sr 💯💯
You're Welcome!
It worked!
nice!
I must be doing something wrong? I have a 01 tahoe and when I do the steps I hear the doors actuate and I press the lock and unlock but nothing happens. My new remote looks just like my old one but it does nothing?? Please help and thanks so much!!
if the vehicle is going into programming mode but not responding to the fob - then there may be an issue with the fob
Guess i have bad batts on my 2 other key fobs
Only one worked...
When I tried it it did not work for my why?
Same
Only unlock and horn working put open doesn’t work
It didn't work on my 2001 chevy tahoe
I did the exact thing to program my key fob for my 2001 Tahoe and it did not work, done it over again and again still not programing, Please help, also put new battery in the fob too.
Me to bro
same
Same
Me 3
I'm so aggravated with this fkn remote bs I could rip my steering wheel off!! What are we doing wrong?? Looks like it worked for other people?????
How do you program for drivers?
the order in which you program them in will determine the driver number ( first remote is Driver 1 and second remote programmed is driver 2 )
🔥🔥
My key fob is programming with my new one
If having trouble try cleaning the contacts with a Q tip and alcohol. Fixed it for me.
Doesn’t work
My car horn beeps as soon as I unlock the car
Same thing with mine
Doesn't work 😢
U brain doesn't work 😂
Same problem. Wouldn't reprogram until I popped the fob apart and cleaned the contacts with a Q tip and alcohol. Then it worked!