Good clear video with just the right level of detail. I have a 10-reg Astra but my code 16 is intermittent and the brake warning light DOES go off when I release the handbrake. The green dash indicator for daytime running lights also flickers. I can start the car and drive it with no fault, but when I touch the brake pedal, that's when code 16 appears. But sometimes it doesn't! Where should I be looking for a loose connection, especially as the green light flickers too?
I have code 16, 21,22 and back windscreen wipers not working , cigarette port , and water jets... checked all bulbs and changes on rear end , all fuses look fine but still no joy.... any ideas please...🙏
After you replaced the brake bulb then the Brake warning stays on. How did you fixe that and switch off that brake warning lamp (low brake fluid lamp)?
Hi have you Inspected all the bulbs? If then check all of the lamps on your vehicle, including the headlights, brake lights, indicators, and interior lights, position, parking, reverse, fog, registration, daytime running lamp. Look for any bulbs that may be burnt out, loose, or not functioning properly. If you find any faulty bulbs, replace them with new ones. Thanks
Thanks for the vid, mate. Good instructions and detail. Saw everything I needed to see 👍
Thanks for the vid upload gives us a bit more confidence to tackle jobs like this
Thank you very much for the video, help me so much 🎉
Good clear video with just the right level of detail. I have a 10-reg Astra but my code 16 is intermittent and the brake warning light DOES go off when I release the handbrake. The green dash indicator for daytime running lights also flickers. I can start the car and drive it with no fault, but when I touch the brake pedal, that's when code 16 appears. But sometimes it doesn't! Where should I be looking for a loose connection, especially as the green light flickers too?
I have code 16, 21,22 and back windscreen wipers not working , cigarette port , and water jets... checked all bulbs and changes on rear end , all fuses look fine but still no joy.... any ideas please...🙏
Very clear, thank you so much.
Was there a follow up as to why the warning was still there after the bulb was replaced?
Great video, thanks very much
I got a code 16 replaced all bulbs and I only get code 16 when I press the brakes but all lights are working
After you replaced the brake bulb then the Brake warning stays on. How did you fixe that and switch off that brake warning lamp (low brake fluid lamp)?
Good job buddy
Dood clear video. Do the tail-lights on an estate fit in much the same manner?
My lights are workin still get code 16
Hi have you Inspected all the bulbs? If then check all of the lamps on your vehicle, including the headlights, brake lights, indicators, and interior lights, position, parking, reverse, fog, registration, daytime running lamp. Look for any bulbs that may be burnt out, loose, or not functioning properly. If you find any faulty bulbs, replace them with new ones.
Thanks
Last light is handbreak