2012 Opel Astra J FRONT shocks, springs and sway bar links. Step-by-Step
HTML-код
- Опубликовано: 25 авг 2024
- How to change new front shocks, springs and sway bar links to 2012 Opel Astra J Sports Tourer 1.6 T.
This also solved the "klonk" noise problem, which i heard coming from the front suspension. problem was the top strut mounting.
Link to my rear brake job video: • Opel Astra/Vauxhall J ...
Link to my front brake job video: • Opel/Vauxhall Astra J ...
Link to my rear suspension job video: • How to - New rear shoc...
Parts and tools I used:
Bilstein B4 OE Replacement shock absorbers
KYB coil springs
Vaico top strut mounting
Wheel stoppers
Car jack
Jack stand
Breaker bar
Brush for cleaning
WD40 Rostlöser
12mm and 18mm spanners
Socket ratchets
Impact driver
Strut spring compressor tool
19mm, 21mm and 24mm sockets
Open 18mm and 24mm sockets
Torx T40
Angle measuring disc
Plastic mounting wedge set
Hammer
Brake cleaner
metal brush
Long-Term Anti-Corrosion agent
Silicone grease
Silicone spray
Blue thread locker
Disclaimer:
This video is for entertainment purposes only. I'm not a professional car mechanic. My methods of doing things might not be the only way or the right way to do things. Do your own research for the specs and right kind of parts for your car. Always use appropriate protective safety wear and glasses!
#opel #vauxhall #astra #suspension #shock #spring
Sway bar links gave up after about 23tkm. Loud "klonk klonk" noise. Right side was worse. I didn't use originals, when i changed those two years ago. Now i changed original parts, hopefully will last longer.
Thank you for this video. I have astra 288tkm with all original suspension. My model (business) suspension is higher than others (Cosmo) . Replacing suspension I would like to make it more soft. Did your suspension height change with new springs? Is it now more soft or same? Thanks.
@jgoncalodm i didn't notice any height difference between originals and Bilstein B4 shocks and KYB springs. But i think Bilsteins are harder than originals were, it's not a big difference, but especially in cold weather, in the beginning of driving, i will notice a small difference. But I really like, how it is now.
@@kaukolaDIYthank you for the feedback. I will try the kyb springs and OEM new shocks.
I have an astra j 160 hp cdti. Same problem of noise since 150000km. I have 200000 km today and i m on holidays near Barcelone.
Nice car to drive. I ve only lose a rear steel fixing system on the rear brakes i chance before my travel ( it s my fault, i didn t shut it enough). A nice guy put me a récupération screw , and i could start my holidays in spain.
I will change my shocks absorbers this winter with quinton hazell parts for the price ( made in india i think).
Thanks🇫🇷😼😉
Thanks for taking the time to do such a clear video. I have a 2013 Orlando and believe it is very similar to this Opel model.
I'm sure, that many basic car models of that time, use similar brake and suspension components.
A really good vid, i have a classic knock/rattle from the front so this has helped me understand what i may have to do, thank you, Cheshire UK
You're welcome. I've heard that this top strut mount is quite common problem with these to make noise... luckily it's quite cheap fix.
11:06 It's good that you secured this place, the water likes to stand there. Cheers
Thank you.
Good Job! I like your spring compressor. It looks safer than mine, I have the ones that hook over. Keep it up!
Thanks. My biggest concern was, how that spring compressor will work, but it worked fine.
@@kaukolaDIY
Yes, it worked very well..... I've ordered 2 sets of these ( so I can use 3). They are cheap but excellent reviews.... I haven't tried them yet.
www.ebay.co.uk/itm/222382025735
@@kaukolaDIY Hi. Where did u get this angle spanner ??
I bought almost all my tools from our local shops, called OBI or Bauhaus. Tool set that i have, is Proxxon Industrial brand. Some special tools and sockets, i ordered from Amazon.de. unfortunately, i don't have any links to give you.
@@kaukolaDIY Thank u very much i will look at obi. Cheers.
Good job, you dit well, and Nice astra j 👍
Thanks!
Excellent...thank you so much.
Hello, i changed shocks, top mount and springs and now my springs are skipping...what could be the problem?
very good video been doing my brakes but still making a noise with bosch brake pads
I actually also had some noise coming after the brake job, but i can't hear it anymore. I've been now driving about 2000km after the brake job. Maybe also your noise will go away after some time.
@@kaukolaDIY thank s mate
@@kaukolaDIY just took it apart again found out my guid pin has seized and cant get it out have buy new ones
@@craigtrigg4288 ok, that's good that you found what was wrong.
Very good video ...
Thanks 🙂
감사합니다 고생하셧어요 b
Thanks man! :)
for the 2 bolts holding the suspension on the arm, what if you put them the other way around so you can remove them without removing the caliper next time?
Well.. that's a good question. The bolt is not only threads all the way. Other end is kind of thicker and without threads, so it will fit tight to the hole. Is the hole on the other side same size than the other one? I don't know.
Thanks for video. Which shock absorbers are better & comfortable ? GM stock absorbers or Bilstein B4 OE Replacement shock absorbers ?
That's a hard one to answer, i really couldn't feel much difference. But i think, that Bilstein felt a bit harder, maybe because they were new (?). When i drove first time, i had this feeling "these are better than old ones", but there's really not much difference.
what is that orange spray? i could not catch that. thank you! Excellent video!
Nicro 135, It's called "Long-term anti-corrosion agent". Some fluid against rust. Not necessary.
hi, nice video!!!!
can you tell me the firm of Bussole aperte da 18 mm e 24 mm . thanks for your help sincerely marco
This pen sockets (18 to 24mm set) i ordered from Amazon, product is "Sodial 6496". I couldn't find those anymore from Amazon website, but if you Google, it will give some results. If someone knows, where to get similar product, please tell us, those were actually very hard to find.
Can you send link to black socket key you use to disamble spring from suspensor ?
Do you mean spring compressor like this? www.tectake.ch/de/federspanner-set-fur-mcpherson-federbeine-400869
@@kaukolaDIY no I thought about socket key to unscrew nut between spring and plate to hold suspensor in socket. Is difficulty to explain this without experience in writing in English end without knowing technical dictionary :) btw. Thanks for response.
This maybe? www.amazon.de/dp/B08Z3KPQNP/ref=cm_sw_r_cp_apap_Dlmh3ElBclZLR
Hello, It looks like a new car, why are you changing the shocks?
Shocks were original, not broken, I just wanted to be sure. I had vehicle inspection coming...
Actually the reason, why i wanted to check my front suspension, was some strange "klonk" sound, which was coming from the front.
Torx T40 не підходить на шток
Only Jesus Christ can save you from hell.
підійшов Torx T-50
Oops. You didn't change the anti roll bar bushes.
Do you have to change them every time you change the shock absorbers?
@mbz4652 it's not a must, to change them at the same time.. actually I might have a problem with at least passenger side anti-roll-bar bush. I have to change them soon. I've heard that those bolts are pretty hard to reach.