"If it works it works and if it doesn't . . . . I'll let you know . . . " This is my attitude about basically everything. Just do it and see what happens.
thanks for making a video on this!! I went from 17x7.5 to 17x10 on my tC, I rub on EVERY bump and trying this out. never would of thought to use a socket and wrench!
Got 95 Camaro and put some old school I-Roc’s on it and the tires stick out a little but the tires rub.Did mine with a 3inch round pipe about 3ft long and a hair dryer,worked good vato,Thanks for the idea🤛🏽
I'm actually impressed not gonna lie I e always done the baseball bat method but this tops it all ima try this first thing tomorrow morning thanks for the video
Great fookin idea. This may be the safest way to roll better than a phone book between tire and fender and drop the weight of the car on it...lol Thanks for posting this brotha and don't pay attention to the haters.
Holyshit man I wasn't expecting that!!!! it would have went a lot smoother and would have been less risk messing up the paint if you would have had somebody rolling the vehicle either forward or backwards if you started the back you want to roll it forward so that as the tire spins it also spins on the fender instead of grinding on the fender
Hi I have an 88 slammed with the center leaf springs removed. Bought the truck this way. 225 50*16 tires what's the tallest tire I can put on it for a better ride?
This still work 2018 next time use a bigger socket and a long 1/2 in drive and try to park uphill because the weight will goes down on the tire. Baseball is good but u have to go buy a bat some people already have a socket and wrench lying around.
I have a 91 Isuzu pickup truck that I'm sending low maybe you could tell me where can I find reasonable parts foot not so expensive that's going to kill me...
ah the good ole bacon role ..but hey if you're happy with it than you're happy 🤷🏽♂ ...hope you did something about those paint cracks because it makes it susceptible to rust ..but I get it ...its a fun drift truck 😉
I bet you wouldn't have let us known if it didn't work the video probably wouldn't got posted LOL but you are right we're here cuz we want to do it without the proper tools and equipment and when you do it that way cuz I wish I could prices and it never comes out perfect I haven't even gotten into the video yet but that's just my feelings on things either do it right or don't expect it to be perfect
This guy just said a heat gun is like a hairdryer 😂💀💀a hairdryers reaches 80-100 plus degrees and a heat gun reaches hundreds yo almost 1000 degrees I have one
"If it works it works and if it doesn't . . . . I'll let you know . . . " This is my attitude about basically everything. Just do it and see what happens.
Some guyz on here hating on him yet still watching haha no life
Have t you seen how much fender rollers go for, im broke asf I think id rather buy the roller then fuck up my fenders
@@phillies832 if you never used the roller you will still fk up your fenders lmao!
Realest guy on RUclips “that’s why you clicked on the video “ 😂
thanks for making a video on this!! I went from 17x7.5 to 17x10 on my tC, I rub on EVERY bump and trying this out. never would of thought to use a socket and wrench!
That's wide ! No worries man glad you found it useful
Got 95 Camaro and put some old school I-Roc’s on it and the tires stick out a little but the tires rub.Did mine with a 3inch round pipe about 3ft long and a hair dryer,worked good vato,Thanks for the idea🤛🏽
That’s food I never thought about that. I’ll have to give it a try next time !
What size rims and tires please?
Never seen this done like this before. Pretty cool.
Yo mad props that truck lowkey a drift monster
Damn bro thanks a lot . Doesn’t have to be perfect. Just needs to clear! Good video thanks a lot. Gonna do it on my grand national right now
Shittttt the socket is a good ass idea props my guy
yea my nigga
Decades old
@@filiparonsson6824 on folk
I am doing this!!! What a good idea. It was way better than using a bat
Really??
Blessed to see this. I got some 22s on my impala I love this idea ima try it tomorrow bud
Hey did it work?bc I need help with mine?
Yes it worked
Got 285’s on my e46 and rubbing on the rear thanks
I'm actually impressed not gonna lie I e always done the baseball bat method but this tops it all ima try this first thing tomorrow morning thanks for the video
Great fookin idea. This may be the safest way to roll better than a phone book between tire and fender and drop the weight of the car on it...lol
Thanks for posting this brotha and don't pay attention to the haters.
Thanks man !
Ignore the haters they’re missing the point, this is a DIY cheap hack, good job!
Holyshit man I wasn't expecting that!!!! it would have went a lot smoother and would have been less risk messing up the paint if you would have had somebody rolling the vehicle either forward or backwards if you started the back you want to roll it forward so that as the tire spins it also spins on the fender instead of grinding on the fender
Hair dryer will work fine. You won’t burn the paint that way.
I will definitely try this. Just keep going ! Great video!
Gonna try this out tomorrow. Thanks for the video and idea!!
That’s a different but valid approach. Thanks bruh.
Honestly surprised, this is a really good idea
wow this is awesome. I just ordered a fender roller but I'm going to give this a try today!
Get the fender roller you could pull it too
Hi I have an 88 slammed with the center leaf springs removed. Bought the truck this way. 225 50*16 tires what's the tallest tire I can put on it for a better ride?
it's all up to you man
Low key genius
That was pretty slick bro
Hey man, you do you. Ignore the haters.
Thanks man ! Appreciate the support
Your other tires are stretched on that why they don't rub
Does it work when wheels and rims are 1 inch outside the fender limit? I mean should the fender end up exceeding that limit?
I personally haven’t tested this method with wheels that poke but I have used a pipe in order to flare the bed out on wheels that poke about 1.5”
This kid is a genius 👏
Did the socket with impact gun definetly worked 💪
I just did this and it worked thanks!!!!!
Right on man !
Good idea man, subbed 👍
This still work 2018 next time use a bigger socket and a long 1/2 in drive and try to park uphill because the weight will goes down on the tire. Baseball is good but u have to go buy a bat some people already have a socket and wrench lying around.
Good video man! Thumbs up! Can’t wait to try it!
Why so many haters? If it worked for him maybe it will work for others.
I want to drop mine they have 15x10 rims and ima put 205/50r15 tires on it will the front ones hit when i turn ? Or do i have to do this process
depends on how low you go , the lower you go the more you rub but yes if you go as low as me you will have to do this
throw the next size socket up there on second pass and use the impact lol
Is it still rubbing it looks like the tires are to wide I’m going thru the same problem
No rubbing
Good video. I saw another guy using a baseball bat and rolled his fenders.
Thank bro that exactly what I was looking for...
I think smart idea. Smart way to fender roll 😎👍
I ma try da on my 8th gen Honda Civic si coupe.
Wow that's a good idea lol. Good hack for sure
I have a 91 Isuzu pickup truck that I'm sending low maybe you could tell me where can I find reasonable parts foot not so expensive that's going to kill me...
All depends on what kind of parts, oem or aftermarket ?
I just put the socket on an impact and do it like that it’s a lot quicker just always use a heat gun lol
Hey I like your idea of using the socket it seems really easy but did it work out for you?? Do the tires still rub?
yes no rubbing anymore , alot of people dislike it haha
Not gonna lie this is genius
With Power still that would do nice
Genius, quick and effective.
no weight in the back so that would make an great drift truck you wouldnt need an lot of hp to get the rear end side ways
Haha yupp I spin it super easy. I need to work on not letting the rear end kick out so much
What tires do you have?
205/50R15
@@STONEBROKEGARAGE thanks bro keep up the videos.
You're a freakin genius!
Just think a heat gun can damage I'm pretty sure a hair dryer won't and it will be hot to the touch
Would anyone recommend this?
Where did u get those rims at plz answer me?
ah the good ole bacon role ..but hey if you're happy with it than you're happy 🤷🏽♂ ...hope you did something about those paint cracks because it makes it susceptible to rust ..but I get it ...its a fun drift truck 😉
Did it work?
Awesome!! Will give it a shot!
Did it work m
Want better result use a drill or impact to spin it steady.or roll the truck.make even passes
Good old tech
use bat. more easy. but still, nicely. no need rush
I heard people use a bat with a towel on it
bruh what the fuck lmao i wouldve never thought of this, thanks a lot tho this actually helped so much
I like it 💪🏾
Thanks !
Good video very helpful
Thank you
Genius idea!
Good job and great idea! Ty
a big fan bro
seen that shit worked my face went “😯”
Bro you are a fucking genius, I'm gonna give this a try.
Interesting, gotta try thx
This works perfect thank you
Amigo nesecito tu ayuda
I bet you wouldn't have let us known if it didn't work the video probably wouldn't got posted LOL but you are right we're here cuz we want to do it without the proper tools and equipment and when you do it that way cuz I wish I could prices and it never comes out perfect I haven't even gotten into the video yet but that's just my feelings on things either do it right or don't expect it to be perfect
Robert Begin why would he post a video on it if it doesn’t work, dumb point you’re tryna prove
This guy just said a heat gun is like a hairdryer 😂💀💀a hairdryers reaches 80-100 plus degrees and a heat gun reaches hundreds yo almost 1000 degrees I have one
Might fuck the paint up vut
people mad cuz they spent $$$ n didn’t think of this
Lmao 😂
Is only $30 dollars to roll the fenders by professional
i got you to 999 likes
Thanks !
Old school way. Hold a baseball bat up there and roll the car forward.
No quema cuhh
looks like an B2600 mazda
Pretty similar trucks just different brands
Nothing happen?lol
i went 20x11 with 315 on the rear and i was thinking of doing this but ima just pay 150 for both sides i dont wanna fucked up on my car😂
If they can drift a 64 impala you can drift a truck
umm an aluminum baseball bat works way better and alot faster. DUH!!!!!!!!
West Coast Tattoo Parlor how you gonna fit a bat in there stoopid
Looked like the paint cracked
Angle grinder cut it out
cheap, hahahahaha. still living with papi. eres el nene.
Nopalero
baseball bat
love u :)
use a hammer
Kkk kkk kkk