Part 1 Torque Motor Mount Replacement Nissan Altima 2007-2012
HTML-код
- Опубликовано: 6 сен 2024
- In this video we will be demonstrating how to replace the transmission side motor mount on a 2009 Nissan Altima S Sedan with the 2.5 liter engine. This is the same procedure for 2007 thru 2012 Nissan Altima's.
This series includes 4 videos cover all motor mounts for the Nissan Altima 2007, 2008, 2009, 2010, 2011 and 2012:
Part 1 Torque Motor Mount Replacement Nissan Altima 2007-2012
Part 2 Engine Motor Mount Replacement Nissan Altima 2007-2012
Part 3 Transmission Mount Replacement Nissan Altima 2007-2012
Part 4 Rear Engine Motor Mount Replacement Nissan Altima 2007-2012
Be sure to hit the Like button and subscribe for more Car DIY videos!
Disclaimer: This video is for entertainment purposes only. Do not rely on this video as a substitute for professional advice. Always seek professional advice before attempting to make repairs. Perform repairs at your own risk.
![ARGENTINA vs. CHILE [3-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 7](http://i.ytimg.com/vi/De3AWmXzhuA/mqdefault.jpg)
I'm very thankful with you.the way you explain very detailed step by step
I already replaced the whole motor mounts on my wife's 2008 altima following your instructions.
again.....THANK YOU.
GOD BLESS YOU.
Excellent instructions! Thanks!!
Just saved 267$ by watching this Thank you!
TechForce360, thank you so much for this tutorial. Took my car in for an oil change and "whalaa" the mechanic notice my Torque Motor Mount needs to be replaced. When I asked for the cost he stated $380 including labor.
Would you recommend changing all of them ? My car only shakes bad wen i put in reverse after being off a long time and i notice that mount is bad
No need for engine support?
This was such a great, informative video thank you so much!!
What are the torque specs for the bolts?
Changed this mount today. It was easy to replace. Saved me some $$$
could you make a video on doing this for a 2016 an also how to check the rear lower one?
You can get a quality Beck/Arnley Torque mount from Rock Auto for $44 including shipping. There are lesser quality ones also available for $20 plus shipping. But by the quality one.
Thanks for your awesome Video on changing the Altima Motor Mounts! Saved me time from figuring out the best way to change these mounts. Straight forward!
What about the fluid you supposed to add to the motor mount
Hello I think I may be having this problem I check my mount passenger side n rubber is all broken when I’m driving I’m hearing a clicking noise like something rubbing I already check my from axles cause they were bad leaking. So I’m guessing the noise is coming from bad motor mounts if you don’t mind telling me which motor mounts you bought from amazon an how long did they last you since you put them on. Thanks in advance
Replace all four
Well done. Ty
Thank you man you save me a lot of money. Thanks
Just did this job. It was a breeze with this video!
Did you have to jack the engine up? if so where was the jacking point.
A wood block under oil pan so it doesnt damage doing one tomorrow
And jack up just till theres pressure
A block of wood under oil pan just enough not to much
One thing people should know
Oil leaks destroy motor mounts
If your car drips oil on the motor mounts
Before replacing motor mounts fix those leaks.
Anyone know how to change this is the later generation 2013-17 Nissan Sentra
Did you jack the car up?
You have 3 wrenches laying on the engine what is the third size wrench ?
This is really helpful. Thanks!
Does all the mounts apply to the 2007 3.5 model?
Great video man! I have 2011 Altima 2.5 SL with 82,500 miles. Car wobbles/shimmy/shakes on acceleration especially under load like on and incline. Once up to speed clears up. Steering and suspension components feel and looks fine. Steering wheel doesn’t shake. Feels like shaking from engine. Possible this mount or all these months you did would fix my issue? CV axles look good and don’t have bunch of play in them. So I was thinking engine mount of some kind. It’s been happening since about 60,000 miles. I take very good care of my car. I also make how to videos I including CVT fluid change video. Also how many miles was on your Altima when you did these mounts? Thanks!
Thank you
Thank you solid video really helped ifollowed clearly 🤙
$14 at rockauto... same brand
Whats the torque specs for the bolts
My 2013 Altima SV 2.5 has it in the same place!
Would you recommend OEM parts or do you think it is okay to use aftermarket parts? I was told to use OEM parts if I was gonna keep the vehicle but any possible savings would be great. Thanks.
Bruno Rojas doesn’t really matter as long as it’s a quality and new part. Tbh Nissan puts cheap parts in their cars that don’t last the motor mounts are one of the parts and the crank/camshaft sensors are another
Hey do you know anything about the when you turn the steering wheel and you hear a clicking sound
That's the tell tell sign your Cv axles are going bad and need to be replaced
My dealer quoted me $450 LOL for my 2011 Maxima. I bought the part for $40 lol
What's the torque spec
Ok
a shop near me charged 500 for that repair. they lost their mind and im never going back
Quoted not charged cuz ill be a fool to accept that 🤣
where was the jack placed under the car during this process?
rich porter no need to put a jack. As there are 2 other mounts that hold the engine weight.
Does the same apply to the 3.5 engine?
How to fix it if thread strip already ?
Hi, did you fix your stripped thread, I have the same problem.
So no torque spec
Today my dealer quoted 260 for this mount.
i need to change professions if people are paying 120-300 bucks for this in labor.
DrPepperJunior try 800
Ill do everyone for 60 bucks just get the parts
I bought all 4 brand new motor mounts from eBay for $60
Wasted video when no torque specs given.
2:18
I have replaced this mount three times already... it just keeps on going bad. Now is shot again and my Altima 08 2.5 is pulling to the left when I accelerate and then pulls to the right when I stop pressing the gas pedal. I already replaced inner and outer tie rods, CV axles, 2 alignments and it still pulls. I'm currently reading about pulls coming from torque-steer issues and it can only be the arm controls which only have 20K miles or all the mounts.
Luis Zelaya that’s sucks man, maybe using a more quality part?
Ill do everyones for 60
thank you
Do you know the torque settings for the bolts?
63 ft lbs