So far any reviews about the cams, troubleshooting or something i want to put some in my 07 GT but i heard a lot of things, so you are the one to tell me you experience, and btw nice 3v
Can we get a couple 2nd-3rd gear pulls or something man I'd like to see the acceleration difference up top. Or a couple "filmed in Mexico" racing videos
it's getting warm out , throw a GoPro on the car and you should be able to get a couple races just driving around. even a cell phone recording of a couple 2nd gear pulls and 3rd gear pulls would be dope
@@VQ37_Jacob im currently ordering all my stuff now, which set of beehive springs did you use? And did you use the phaser limiters comp cams sells or did you go with Lockouts? Thanks In advance!
@@2_Wheel_Waldo I’ll have to try to find the exact part number I just know they were Comp cams beehive valve springs, I did livernois phaser lockouts they are cheaper and easier to install than comps part
Hey man, I know I’m a little late but where did you find that deck lid panel from, ive been looking everywhere for one like that but can’t find it. Thanks!
No worries, so this is actually the oem decklid panel I just removed the chrome badge and bought an s550 GT badge with 3m tape and secured it over the small holes from the previous badge.
It was pre painted off of eBay. Just look for one that has good reviews and make sure to message the seller your paint code. Way cheaper than buying one off of AM
What year is yours? What taillights do you have? Sounds nice - you put a lot of dough in it during these upgrades, but it sounds really nice. I’m just shocked by your mileage on the odometer…I’ve got an ‘08 that I got in late ‘09 with 1k miles, it now has 208K - all original - all stock - and I’m looking to do some work on it to improve performance and provide that awesome sound - and I love your headlights and taillights - please share a link for the taillights…thanks!
@@VQ37_Jacob one more question I’ve noticed that my lights don’t compete with these modern car headlights any recommendations for bright obnoxious headlight bulbs?
I personally have not been on a dyno with the car but I know people who have switched to these cams on a very similar setup and have gained up to 45whp
Great! I love the fact I can shift at 7,000rpm now and I haven’t had the chance to dyno it personally but other people have gained 40+whp from these cams
This is my favorite body style of mustang and I found one on Facebook marketplace that was a V-6 and manual for really cheap but the dude won’t answer me of course
get the GT it is very reliable and the MPG difference is only 2mpg. I used to own that V6 and it was a great car, despite all the hate it gets online but it isn't exactly quick. It's decent tho'
@@wiselinkmarque3947 this will probably be my last mustang as well. This is my 3rd mustang in a row. It would be nice to have and drive something different. Mustangs are everywhere. See one at every freaking light
very well! Could you tell me which COMP CAMS you used? NSR? is it a gt 4.6? Can use with Supercharger? Did you need to change anything else? Or just replacing the CAMS? Could you share the purchase link? thank you for the help
I love watching people's progress on builds its so fascinating for some reason.
It’s fun to see the journey for sure, stay tuned and you’ll see some more upgrades in the future!
so true it also gives me ideas on my build too
Hey the JLT air filters can be clean and re oiled with the K&N air filter recharge
I’m aware I’ve cleaned and re oiled it a couple of times, then just wanted a new one after so many years.
I have the 127550 on my supercharged 3v with the phasers locked out. They make great mid range and top end power, plus they sound mean as hell.lol
Yes definitely my favorite mod so far!
Fastest and Cleanest 3v in the Gulf Coast!😍😎
I'm on the Gulf coast, so I wouldn't be to confident about that fastest 3v remark.haha
@@bad3vlv672 we should get a run in! 😂
I mean we could, but I hope you have some kind of power adder. Haha
@@bad3vlv672 cams and nitrous should be enough!
Do you ever make it to Texas?
I do think it’s sick how u have the gt badge but can’t see it until u get close
Sounds pretty good. I woulda thought it would have more chop though.
These cams are made for performance, they have a mild chop unlike the FRPP cams they have a lot of chop but little to no power gain whatsoever.
@@VQ37_Jacob how many hp and tq is this supposed to add?
@@majorchungus I’ve seen others with similar mods and the same cams make another 47hp and 22tq I haven’t personally been on a dyno myself.
Chop chop! Nice 👍🏽 what’s next!
Maybe a clutch 🤔
Man it sounds good,love to do my 3vale like that.
I appreciate it! Chase them goals man!
That’s a sick build ! Good job 👍🏻
Baddest 3v in Alabama
So far any reviews about the cams, troubleshooting or something i want to put some in my 07 GT but i heard a lot of things, so you are the one to tell me you experience, and btw nice 3v
I’ve had 0 issues so far after cams
Sound great but get some rest dude.
Lol
Sounds wicked😍 my dude🤘🏼👌🏼
Thinking of getting a 3V after I finish my procharger build on my 3.7 mustang
I like modded V6 cars, even the 4.0 with a supercharger.
Hell yeah man. Im looking to do the same cams
Where’d u get the cams and springs
Can we get a couple 2nd-3rd gear pulls or something man I'd like to see the acceleration difference up top. Or a couple "filmed in Mexico" racing videos
I’ll definitely have to get something like that together soon! This year has been really busy so I’ve been slacking on the uploads 😂
it's getting warm out , throw a GoPro on the car and you should be able to get a couple races just driving around. even a cell phone recording of a couple 2nd gear pulls and 3rd gear pulls would be dope
@@VQ37_Jacob im currently ordering all my stuff now, which set of beehive springs did you use? And did you use the phaser limiters comp cams sells or did you go with Lockouts? Thanks In advance!
@@2_Wheel_Waldo I’ll have to try to find the exact part number I just know they were Comp cams beehive valve springs, I did livernois phaser lockouts they are cheaper and easier to install than comps part
@@VQ37_Jacob I'm just trying to decide If the .550 lift springs will be enough for the cams ?
Could you link all the parts
SICK! Man I love these cars!
Any upgrades to the ECU? Did you get it tuned? I know nothing about modern tuning and am very curious
I’m running a Lito tune, he’s definitely one of the best tuners for these cars.
We have the exact same decklid combo I just need those taillights 🔥
Guess who just got the taillights
@@emilioluna8189 ayeee
Sheesh sounds dangerous
Sound very good 👍
Sounds and looks amazing. How was the install with the valve spring replacement?
Let’s go baby
im also in Alabama i think I’ve seen this car around man! what area are you from
I stay around Daphne/Robertsdale area
What size wheel spacers you running in the back? Nice fitment
Hey man, I know I’m a little late but where did you find that deck lid panel from, ive been looking everywhere for one like that but can’t find it. Thanks!
No worries, so this is actually the oem decklid panel I just removed the chrome badge and bought an s550 GT badge with 3m tape and secured it over the small holes from the previous badge.
@@VQ37_Jacob Gotcha, that makes more sense, Thanks man! Definitley looks super clean!
For some reason your camera won't pick up that deep rumble the lobe makes, but I can tell its loud GGs
Didn't know ya had a youtube channel lol 😂
Haha yessir! Gotta make a new video soon it’s been a min 😂
Great mods!!!
Looks just like my car 😭
You didn’t have to get cam phase limiters with the stage 2 cams did you?
I did. I went with the livernois lockout kit, costs less than the comp limiter kit and is easier to install.
@@VQ37_Jacob Did your gas mileage take a big hit with your timing locked?
@@darkmatter7208 not really I still get around 16-18mpg city
Where did u get ur rear spoiler from??
It was pre painted off of eBay. Just look for one that has good reviews and make sure to message the seller your paint code. Way cheaper than buying one off of AM
@@VQ37_Jacob facts!! Was the install fairly easy ??
@@brandonoliphant6587 Very easy just two bolts, some 3m adhesive and alcohol pads then you’re good.
@@VQ37_Jacob sweet! Ur car sounds bad ass with those cams 🔥💨
Did you use air or rope to keep the valves from dropping
Air
I know maybe you don't have the mustang but how much did you spend with the cams
This is tuff ! 😮💨 I have a 2005Gt
What year is yours? What taillights do you have? Sounds nice - you put a lot of dough in it during these upgrades, but it sounds really nice. I’m just shocked by your mileage on the odometer…I’ve got an ‘08 that I got in late ‘09 with 1k miles, it now has 208K - all original - all stock - and I’m looking to do some work on it to improve performance and provide that awesome sound - and I love your headlights and taillights - please share a link for the taillights…thanks!
2009, my taillights are the Raxiom Gen 5s
www.americanmuscle.com/raxiom-gen5-taillights-0509.html
I have a 2008 mustang gt what headlight housings do you have I actually really like them
www.americanmuscle.com/2010-headlight-black-0509.html
They sell them in clear and smoked housings^ I have the clear housings
@@VQ37_Jacob one more question I’ve noticed that my lights don’t compete with these modern car headlights any recommendations for bright obnoxious headlight bulbs?
@@heyitsalexx6362 Yes
@@heyitsalexx6362 our 3v has the sylvania leds that you can get at oreillys. the flat ones with two focal points.
Wow that sounds freakin mean
I appreciate it!
Are you running wheel spacers? If so, what size and brand?
whats the part number on the valve spring retainers
How is the drivability after the cam install? What gears you currently have?
Drives fine I daily the car and don’t have issues, I’m currently running Ford Performance 4.10 gears.
Sound good
Thank you!
What power did you gain?
I personally have not been on a dyno with the car but I know people who have switched to these cams on a very similar setup and have gained up to 45whp
Porting the FRIM is worth 9-12hp
Frim?
@@hyperwolfco8021ford racing intake manifold (i think)
Did you port the heads?
I was hesitant to go with these without porting the heads first.
Sounds great
Thanks and no I did not port the heads, been running strong since though!
The stock heads will flow enough for 750 to 800hp
nice i have a 95 gt
whats the part number on the spark plugs
How many miles when you did the cam swap? Just picked up an '05 with 161k.
About 55k on the dash when it was done, I’m now at 62k.
How much was everything ?
Was a while ago but I believe I paid around $1400 for all the parts
@@VQ37_Jacob not bad at all
Sounds great how’s the performance difference?
I’m curious too
Great! I love the fact I can shift at 7,000rpm now and I haven’t had the chance to dyno it personally but other people have gained 40+whp from these cams
Narrated by WalterJr. From Breakin Bad. Lol
🤣 I literally thought the same thing
Sounds awesome 👏🏻
Appreciate it💯
What headlights do you have
Raxiom 2010 style black housing
You near the huntsville area? I ain't seen you at meets and your car is sick
Daphne AL area
what exhaust u got ?
Pypes Longtubes/BBK Off Road X-Pipe/Ford Racing Axlebacks
Did you do all the work yourself?
I had a shop install the cams, little out of my comfort zone to do myself.
@@VQ37_Jacob Thank you
Cool
This is my favorite body style of mustang and I found one on Facebook marketplace that was a V-6 and manual for really cheap but the dude won’t answer me of course
The S197 is definitely the best class
get the GT it is very reliable and the MPG difference is only 2mpg. I used to own that V6 and it was a great car, despite all the hate it gets online but it isn't exactly quick. It's decent tho'
@@wiselinkmarque3947 well it’s a 3600 pound mustang that has 210 horsepower.. can always throw a turbo on it
@@5point0h67 usually people put a supercharger on those. But oh well I’ll never own one again. Next car I buy will be German.
@@wiselinkmarque3947 this will probably be my last mustang as well. This is my 3rd mustang in a row. It would be nice to have and drive something different. Mustangs are everywhere. See one at every freaking light
Bro she sounds mean whats your exhaust setup?
Appreciate it! I’m running Pypes Longtubes/BBK Off-Road X-Pipe/Ford Racing Axlebacks
Exhaust setup?
Pypes Longtubes/BBK Off-Road X-Pipe/Ford Racing Axlebacks
@@VQ37_Jacob bet it sounds mean asf
@@cnowa2763 appreciate it 💯
Where can I get the deck lid and gt emblem?
OEM decklid with a s550 GT badge
Will it pass smog?
No
At least not in cali
@@mariocalderon1563 basically any mod won’t pass smog in cali, they’re hella strict
What part number for cams? Thank you
127500
@@donaldsoderblom815 yes
Goals. Modded right man
what numbers you making!?!
Maybe a Dyno video soon!
@@VQ37_Jacob Yesss 🙏
Whats the exhaust set up?
Pypes Longtubes/BBK Off Road X-Pipe/Ford Racing Axlebacks
What’s your exhaust setup
Pypes Longtubes/BBK Off Road X-Pipe/Ford Racing Axlebacks
i love it
Sweeet .
very well! Could you tell me which COMP CAMS you used? NSR? is it a gt 4.6? Can use with Supercharger? Did you need to change anything else? Or just replacing the CAMS? Could you share the purchase link? thank you for the help
You slow?
Yes i am
We’ll his name is 3valveJ and in description it’s says Mustang Gt so I’m sure it’s A 4.6 GT and not a 4.0 v6 mustang gt…
At cold start it sounded like a huge fart... At first
What taillights do you have?👀
Raxiom Gen 5s
Hey man, where did you get that GT decklid
It an s550 mustang decklid badge, needs minor tweaking to fit
@@VQ37_Jacob can you make a tutorial bro? I wanna do it so bad to mine
Gotta take those cats off man, you won't regret the sound
I have a catless x-pipe paired with long tubes and axlebacks
Nice👍👍💧💧🥪👌
Man you need to show more motivation you are putting people to sleep.
the word you're looking for is called enthusiasm
I can’t lie my 3V chops 3 times harder
Video??????
@@cannibalgutted7254 check my channel I just uploaded a video of my old mustangs chop chop chop hope you like 👍 🤝
The question is how does it perform??? There are plenty of SLOW cars that "hit hard." It's the performance that matters!
3V lol....
love the 3v
@@galagoz7401 Coyote > 3V
@@TonyM-zi9rq i would hope so since its a newer engine dumbass
@@TonyM-zi9rq Oh really? The newer model of the same car is better? No way thanks for reminding us we all forgot
🤡🫵🏻 could have gotten the bbk throttle body for half the money
That tb is garbage 🤣💀
@@VQ37_Jacobwhy?
how much was the install??