Thanks so much for this Mr. Brashler. Your channel has always been amazing, but you continuously iterate and improve for our benefit. I have learned so many big ideas...and countless small tips, about the work flow of these mixers from you. It's hard for me to quantify my appreciation for you and your channel, but it is large to say the least. Thanks again.
I must of watched your X32 videos of multi track recording & virtual sound check about 20 times, it really helped me to get started on recording my band using Reaper, but i also have an XR18 that i used with Reaper for the same audio in & out Your teaching is incredible, keep up the great work, looking forward to the other video of virtual sound check 😊
My issue was I'm planning on using my XR18 as a stagebox mixer, meanwhile I will be far away at a mix position or tech desk. My Solution has been to create a 30m 3 cable CAT6 reel; 1st cable for "remote" out, 2nd cable for a USB over CAT6 extender, and the 3rd cable is for a 4 channel Cat Snake, which will be; Headphones, Aux out for broadcast, Talkback Mic & PC audio.
A video suggestion: Integrating Apple’s MainStage to both a) Host AuV3 plugin instruments and b) Route hardware instruments through the XR-18 in order to apply AuV3 effects to hardware for live use. This theoretically ends up with a “single pane” of managing/mixing hardware/software via MainStage.
Thanks for the video Drew, I have a question, if you are able to answer. I have set my DAW to record the tracks, however the signal that I get on DAW is really low. I tried to change the gain, on my mixer but it doesn't seem make so much difference. Is there another configuration I'm missing for that? Thanks
Hello Drew. I really appreciate all of this fantastic info. I am a magician who performs at lots of various venues. Banquet Rooms to Backyards. For my magic shows I know that the XR12 would be plenty for me, as I only mostly use 2 channels. My lav and my music. OK. But now regarding multi track recording. I am also a guitar player/singer, and am considering incorporating my music into my magic show. For creating my music, I foresee layering one track at a time into some future DAW. What would be the advantage of going bigger with the XR18? I am thinking if I were to create a multi-track song, and wanted to mix it on the XR, the 18 would allow me to both send and bring back 16 tracks for mixing, after they have been recorded on the DAW. Right? What would it look like if I attempted something similar on the XR12 (because I am hoping to get by with the 12 if possible. I also will consider adding the Xtouch. All of this conversation started from the Flow8, which I was ready to order. But I really want the RTA feature of the XR series.
When we are recording through the XR18, what does the routing need to be for the person recording their instrument track(s) to be able to monitor all tracks including the armed track(s) being recorded?
Hello Drew, I hope you can help. I'm a new newbie to X air 18. So.... I've put a few scenes into a scene folder. When I open XR it opens the last scene used.... but.... I want to start a new scene from scratch ie. Blank page Clean sheet. How can I do this without going through a every setting and putting them all back to default individually ? And then saving that as a new blank scene. I kinda hope all that makes sense. Best regards and thanks for your channel, Pete from Scotland
Hi all! Drew I need HELP with my xr12 and X air editor (windows). I've got an issue: there is no Record section and button in Editor. I tried 1.5, 1.7 and 1.8 versions and got same problem. So I cant record on my usb drive. If i use mixing station via WiFi i can see usb drive and can do the record. but PC editor via lan connection doesn't see any usb and doesn't have Record button. Where do I wrong? Thx
Thanks for the explanation - my band is playing with a click (track 15) and a talk back mic (track 16), how do I make sure those 2 tracks don't record when I record from USB into garage band?
Hi Drew! I would like to be able to hear the instruments while recording using the headphone output. What output should I assign in the DAW or X control software? Thank you!
Thanks so much for this Mr. Brashler. Your channel has always been amazing, but you continuously iterate and improve for our benefit. I have learned so many big ideas...and countless small tips, about the work flow of these mixers from you. It's hard for me to quantify my appreciation for you and your channel, but it is large to say the least. Thanks again.
Most helpful video on this topic I've found. Thank you! Love from Nigeria .
Thanks for sharing this amazing video, much love from Nigeria
I must of watched your X32 videos of multi track recording & virtual sound check about 20 times, it really helped me to get started on recording my band using Reaper, but i also have an XR18 that i used with Reaper for the same audio in & out
Your teaching is incredible, keep up the great work, looking forward to the other video of virtual sound check 😊
Great video. Definitely going to your website for the course! Thanks for sharing!
Thanks Drew!
Really helpful!!!
Excellent instructions.
Yes, very helpful.
Great video it’s a game changer for me. Question @drew are you going to do any videos on a Allen and Heath SQ board
Goated, thank you
Great video, thank you
Thank you
My issue was I'm planning on using my XR18 as a stagebox mixer, meanwhile I will be far away at a mix position or tech desk.
My Solution has been to create a 30m 3 cable CAT6 reel; 1st cable for "remote" out, 2nd cable for a USB over CAT6 extender, and the 3rd cable is for a 4 channel Cat Snake, which will be; Headphones, Aux out for broadcast, Talkback Mic & PC audio.
A video suggestion:
Integrating Apple’s MainStage to both a) Host AuV3 plugin instruments and b) Route hardware instruments through the XR-18 in order to apply AuV3 effects to hardware for live use.
This theoretically ends up with a “single pane” of managing/mixing hardware/software via MainStage.
Thanks for the video Drew, I have a question, if you are able to answer.
I have set my DAW to record the tracks, however the signal that I get on DAW is really low.
I tried to change the gain, on my mixer but it doesn't seem make so much difference. Is there another configuration I'm missing for that?
Thanks
Hey I love the way you teach, can you please do the video of showing how to connect to Cubes or studio one please
do you have link for the driver for the xr18? I have been to their site and i can't find it. trying to connect to studio one. HELP!
Epic video, thank you! Can you do a video on how to use the Line 17 and 18 Aux inputs? I want to use all 18 channels. Much love brother!
Is there latest firmware update on this board
Hello Drew. I really appreciate all of this fantastic info. I am a magician who performs at lots of various venues. Banquet Rooms to Backyards. For my magic shows I know that the XR12 would be plenty for me, as I only mostly use 2 channels. My lav and my music. OK. But now regarding multi track recording. I am also a guitar player/singer, and am considering incorporating my music into my magic show. For creating my music, I foresee layering one track at a time into some future DAW. What would be the advantage of going bigger with the XR18? I am thinking if I were to create a multi-track song, and wanted to mix it on the XR, the 18 would allow me to both send and bring back 16 tracks for mixing, after they have been recorded on the DAW. Right? What would it look like if I attempted something similar on the XR12 (because I am hoping to get by with the 12 if possible. I also will consider adding the Xtouch. All of this conversation started from the Flow8, which I was ready to order. But I really want the RTA feature of the XR series.
When we are recording through the XR18, what does the routing need to be for the person recording their instrument track(s) to be able to monitor all tracks including the armed track(s) being recorded?
Hello Drew, I hope you can help. I'm a new newbie to X air 18. So.... I've put a few scenes into a scene folder. When I open XR it opens the last scene used.... but.... I want to start a new scene from scratch ie. Blank page Clean sheet. How can I do this without going through a every setting and putting them all back to default individually ? And then saving that as a new blank scene. I kinda hope all that makes sense. Best regards and thanks for your channel, Pete from Scotland
How do you download the driver? Can you do it with phone and using mixing station?
How to connect two different brand digital console just like dlive s7000 and midas m32 plz one video on this
Hi all! Drew I need HELP with my xr12 and X air editor (windows). I've got an issue: there is no Record section and button in Editor. I tried 1.5, 1.7 and 1.8 versions and got same problem. So I cant record on my usb drive. If i use mixing station via WiFi i can see usb drive and can do the record. but PC editor via lan connection doesn't see any usb and doesn't have Record button. Where do I wrong? Thx
Thanks for the explanation - my band is playing with a click (track 15) and a talk back mic (track 16), how do I make sure those 2 tracks don't record when I record from USB into garage band?
Hello, is there a USB driver for the Macbook M1 silicon processor? Does it work on the M1? Is your computer a silicon processor? Thanks.
Hey Drew, Great video... Any thoughts on using Reaper for VST usage via this method vs. using Waves SuperRack performer?
Does the audio of the console go will all the effects and the frequency cuts to reaper of do you have to add that separately ?
❤❤❤
Is there anyway to record a multi track out of the XR18 to an Android device phone/tablet?
ruclips.net/video/iGQASoHKZX0/видео.htmlsi=SqbaVsGlHrqaQwkK
no entendí la última parte del video
Hey Drew.
Will this work with Audacity?
Thanks.
No multitrack rec. on Audacity
Hi Drew! I would like to be able to hear the instruments while recording using the headphone output. What output should I assign in the DAW or X control software? Thank you!
Yea the way you have this set up will result in the audio going into the DAW as very low. This came from Behringer just fyi.
Do you have any suggestions on how to fix the low input level problem?
You're a geek. How do you remember this? I'm just now learning all of this but im excited. im just being funny. im going to be this guy too haha
He was looking at 2 cameras at the same time
спасибо огромное за видео урок,просьба сделать такой же урок с Logic pro🙏🙏
What is the name of driver for Windows?