Thrashin Supply bar setup on my Road Glide Special - Thoughts & Review!
HTML-код
- Опубликовано: 9 окт 2024
- What's going on RUclips? Six5Rider here, welcome back to the channel!
In this video, we'll be doing a full review of the@THRASHIN Supply bar setup on my 2020 Harley Davidson Road Glide Special.
If you've enjoyed this video, please help out the channel by hitting that LIKE BUTTON and SUBSCRIBING. As a beginner Moto-Vlogger, I value and welcome your feedback on ways I can improve to bring you better content.
Follow me on Instagram for more up to date content / six5rider_
Full Thrashin Supply part list below:
www.thrashinsu...
www.thrashinsu...
www.thrashinsu...
www.thrashinsu...
www.thrashinsu...
www.thrashinsu...
www.thrashinsu...
Harley Davidson Kahuna Grips:
www.harley-dav...
Video Equipment:
gopro.com/
Nice video. FYI, You don’t have to use their perch clamps. I used OEM perch clamps from Amazon $34 . Thrashin cost about $150. I did the whole set up on my RG for $1725 with tax.
Awesome! I liked the way theirs looked on the bars, so I didnt mind spending extra for it. Do you have a link for the ones you bought? Just for future reference.
Fyi i changed out my thrashin bars for some aluminium ODI v twin bars. This help a hell of a lot with the vibration. The steel bars imo do transfer alot of vibrations. I do run the 1inch extension also.
Cant wait to get the top tree and guage relocation done.
Ride safe mate.
Thanks for watching! Did you swap out the risers too? Or just the bars?
@@Six5Rider No. I kept the thrashin risers. ATM it is perfect however when I do install the top tree like you I may have to get another set to keep the height correct.
I also use the perch clamps.i tried 2 thrashin bars. To try and get the height I was after. then tried the ODI bars. And absolutely love the current setup.
The ODI bar is available in the 1inch thick size that the thrashin risers and stock Harley clamp use.
@@TheCuttz1984 sorry to bring this back up, did changing out to the ODI bar significantly help out with the vibration?
@@Six5Rider 200% fixed. Highly recommend. Even another brand so long as it is aluminium.
That set up looks awesome, im curious on where / how all the nacelle wiring went, was it difficult, etc., cause others have left the empty gauge nacelle on, anyway, great job on the install, clean A,F.
thank you, I basically opened up the outer fairing, removed the headlight and brought wiring harness into the fairing and ziptied everything in there, reinstalled the headlight and closed up everything. Thanks for watching and let me know if you have any more questions.
Great video!
Thanks for checking it out 🙌🏽
How’s your view of the display? Thinking about doing this as well but want full view of my gauges and display.
Sorry for the late reply. I can see the gauges clearly 100% as for the display, I can see everything except for the bottom corners which doesn’t really bother me much!
@@Six5Riderthanks man, another question, how tall are you? I’m 6’4 and wondering how high I need to go.
@@Bamhour you got it! I’m 6’5 and this setup is like 90% perfect for me. If I could have gone another 1” taller it would have been 100%.
Still, no complaints here.
Looks good
Thank you
I’m in a market for these, I’m 5’ 9” so you think a 9 1/2 pull back with a midbend bar would be proper ?
Thank you for watching. Yes, I think that would be perfect for you. And if you ever need a little boost you can always purchase the 1/2 inch riser extension to make it 14” instead of 13.5”
Can’t go wrong either way tbh
🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
When you said relocated did you mean the OG bracket kit or the $500 gauges ?
The $500 gauges
🤙🤘
1” extension on the risers ?
Yup
What size riser did your buddy have?
6.5”
@@Six5Riderthanks man. Good side by side. Trying to figure out if I should do the 9.5 or the 6.5
@@TheKyd1192 you got it! How tall are you?
@@Six5Rider im 5’9. What do you recommend? and will most likely go with the bracket adaptor over the new triple tree for now..
@@TheKyd1192 I would say you can either do the short riser with the high bend bar or tall riser with the mid bend bar … can’t go wrong with either
Glad ya enjoying them but no not worth 2100 to me.
Yeah the price is definitely steep. Unfortunately options are limited as even the competitors have a similar price for the good quality pieces.
The actual contact space on Thrashin Risers is inferior. Kraus is much better.
Yeah since there are no bushings I expected “some” vibration. But I have a feeling mine might actually be a tire related issue.
We shall see