Genius mate ; Thankyou from Australia 🇦🇺 had some other mechanic put his scan tool on told my friend it was an indicator because he thought that’s what cornering light meant ; he cleared the codes with his scan tool and code came back so the story goes now I get the car to look at and everything matches with your advice ! Awesome brother Subbed !!
So handy to be able to pull codes straight from your onboard computer I normally check those codes using a website called Endtuning , I just checked those 2 codes and Turn signal light defected left and other right is what I got, a bit misleading good to know mate 👍👍👍👍
Ha....yes I got something similar, diffentaly a little misleading and I had forgotten about the cornering lights until I noticed the removable cap on the headlights....😁😁
The LED rear lights on the E92s are the ultimate nightmare. My left LED stopped working. Probably dry joints on the circuit board. All other lights in the assembly work. Purchased new LED assembly and fitted, still no LED working, the other bulbs in the assembly do work. There are NO error codes, no warnings on the dashboard and no fuse for the rear LEDs.
I had ccid 380. All I did was pop the hatch, remove the bulb in its holder, disconnected both leads, reconnected them, re-installed the bulb assembly (same bulb) and the code cleared. Costs nothing to try this if you have this error code.
@@amy40c easy way is using bimmercode its cheap and all you will need is a dongle and an app...or you could code them out using inpa / bmw expert. Etc...but you could damage your car with that software so be super careful...
@@JohnnysSpeedShop I have actually been thinking about getting the dongle and bimmercode. Could you give me instructions how to do that using the bimmercode or there is already an option in the app to turn it off easily?
Авто/Мото
Genius mate ; Thankyou from Australia 🇦🇺 had some other mechanic put his scan tool on told my friend it was an indicator because he thought that’s what cornering light meant ; he cleared the codes with his scan tool and code came back so the story goes now I get the car to look at and everything matches with your advice ! Awesome brother Subbed !!
I swear! This is the most educational shit J ever watched on RUclips that was actually super beneficial. Thanks 🙏🏾 bro 😎
Very helpful... I got CCID 380 and 🤔 didn't know where to start... thank you!
Glad it helped ya out.....
Very helpful video my code was cc-Id 134. Which is righ rear break light.
So handy to be able to pull codes straight from your onboard computer I normally check those codes using a website called Endtuning , I just checked those 2 codes and Turn signal light defected left and other right is what I got, a bit misleading good to know mate 👍👍👍👍
Ha....yes I got something similar, diffentaly a little misleading and I had forgotten about the cornering lights until I noticed the removable cap on the headlights....😁😁
Good to know johnny
Cheers Dave
Nice video.. I have a bmw e90 and I have change the light H3 with led.. the led works good but I have error on my display. The same with H8 fogs light
You can code out those errors with the bimmercode app and a dongle (less than $50), I did the same on my F30. Cheers
@@JohnnysSpeedShop I bought the decoders for the led this morning; I wait for them to come and I will mount them..I didn't know about this app
The LED rear lights on the E92s are the ultimate nightmare.
My left LED stopped working.
Probably dry joints on the circuit board.
All other lights in the assembly work.
Purchased new LED assembly and fitted, still no LED working, the other bulbs in the assembly do work.
There are NO error codes, no warnings on the dashboard and no fuse for the rear LEDs.
You gotta pull them and check the boards...likely broken solder joints..unfortunately common...
I’ve held on the button, the code doesn’t show? I’ve replaced the bulbs but light bulb sign is still showing
Is your car running ? Its need to be off with KOEF then when the warnings is there you can press and hold the BC button....
I had ccid 380. All I did was pop the hatch, remove the bulb in its holder, disconnected both leads, reconnected them, re-installed the bulb assembly (same bulb) and the code cleared. Costs nothing to try this if you have this error code.
Yeah mine was flickering if i smacked it but this is not a real fix...for the few dollars it costs to replace the bulbs it's worth the peice of mind.
What bulb should I buy for this code ?
H3 is what mine were
How do you actually fix it
You replace the bulb...👍👍
Once the bulb is fixed - how do you reset the warning light?
It will do a self check every time you start the car, the warning will self resolve on these. Cheers
@@JohnnysSpeedShop is there a way to turn off the warning light? I have a working led's without canbus so I need to bypass the warning
@@amy40c easy way is using bimmercode its cheap and all you will need is a dongle and an app...or you could code them out using inpa / bmw expert. Etc...but you could damage your car with that software so be super careful...
@@JohnnysSpeedShop I have actually been thinking about getting the dongle and bimmercode. Could you give me instructions how to do that using the bimmercode or there is already an option in the app to turn it off easily?
@@amy40c you can check on there website, I think there's a demo mode where you can enter your car and see how to do it before you buy
For a minute I thought this was the New Scotty from the star trek reboot movies
hmmm okay - not sure what you mean i don't watch star trek...lol
Your bmw is E90 ?
Yes....Captain Obvious....lol
@@JohnnysSpeedShop i replaced my light this morning (CC-ID 380) thanks for the video