How to RESET the SERVICE Light on a BMW 3 Series E90, E91, E92, E93
HTML-код
- Опубликовано: 14 окт 2024
- Hi, this video shows you how to reset the Service Indicator on a BMW 3 series when you do your own servicing. It also shows you what the different symbols mean and how to check the service information on your car. The car used in the video is a 2013 BMW 318i E93 (coupe). This process will be the same on the E90 (saloon), E91(estate) and E93 (convertible). Other BMWs might also follow a similar process.
Many thanks Vince
The most clear explanation of these texts. To the point, easy to follow not to mention devoid of annoying music. Superb. Thank you.
This was a huge help. The dealer did the "vehicle check" and did not reset the meter. This worked perfect and saved me a trip 15 miles away. One difference: I had to start my car in order to get the same menus you had. I have a 2011 E90 and when I went through your steps, the menus never came up. After I started the car, everything worked perfect. Thanks!
I have a 2012 328i (N52 engine). The local BMW dealer wanted around $800 for Spark Plugs, Microfilter (air cabin) and brake flush. I replaced the Spark plugs and filter myself for under $100 and then had a local Goodyear shop flush the brakes, all for less than $225. Reset the Service and brake fluid light. Took less than 5 minutes and worked perfectly. Dan from Kansas City
Thanks Vince for a clear and easy to follow video. It helped me to re set my bmw service light after I changed oil and break pads. Big thanks
It worked for the most part. Had a couple of indicators that were missed to be resetted. One worked and one refused to work. Good video.
Thanks! The other video explaining how to reset the vehicle check lights were really unhelpful! This was exactly what I wanted to see and answered my questions.
I don’t usually comment on RUclips videos but this video really helped so thank you!
Huge help. New BMW owner and I just did an oil change and couldn't figure this out. Thanks
Just replaced the rear brake sensor on my E91 here in the UK, and needed to reset the service lights.
Superb explanation, and has done the job. Result, and thank you!
I couldn't get my brake sensors to stay put, they kept falling out no matter what I did so I just cut the wires and soldered them together and reset the brake warning. now I can never get a code ever again because the circuit is normally closed and now I don't need the sensors. I think it's pretty obvious when your brakes are worn out. the sensor is useless.
Oil service light had just come on after I’d changed the oil. Used this tip and worked a treat.
I watch this video maybe third time in past years and it always help thanks a lot
Never knew I could do this 🤣 this is like an angels blessing in disguise
Thank you sir, this was a great help, I was on the verge of searching for a diagnostic scanner to get rid of the horrible red message, especially as my car is in tip top condition. 🙏🙏
Thank you. great help. BMW did not want to do it because I had changed my oil and I did not let them change it again. Screw them. They charged me for repair, they have not done. I Hungary, these people are gangsters.
This is the only tutorial I have found that works! Thanks!
Thanks so much man, just adding also make sure all your doors and boot is closed otherwise it wont let you access that screen. I bought my e92 330d recently and couldnt work out how to turn the vehicle inspection light off so this video was a god send. Cheers
Didn't work on mine. 2010 M3-spec wagon. If I pushed the starter button with no foot on the brake it just came up with an exclamation mark. Not the one in the triangle. If I have the engine running I and hold the odo reset I get the exclamation mark in the triangle but nothing else.
Stuart Aitken Yes, you need to close all the doors to get rid of the ignition on warning ⚠️ took me ages to realise
Great video. Just serviced my car and now know go to clear my service lights. Big thanks
Thanks man, really clear and accurate video, just reset everything I’ve serviced recently!
Many thanks for posting this, it worked a treat, usual story, garage changed front brake pads and oil and filter without re setting the service reminders, this method cleared them straight away no problem.
Thank you for the useful info! I've taken my car to the dealership 3 times for parts replacement & service since my service light came on last year, yet for some reason they didn't reset the service light. Finally got tired of seeing it & was trying to see if there was a way I could just reset it myself rather than make an appt at the dealership just to have them do what they forgot to do. This solved my problem. Thanks!
Clear and precise. No shaky camera too. Thanks
This the only vdo that actually worked for me thanks bro
thank you ur the only video that said do not turn it on and it actually worked so thank you very much
Where did you found a bmw with a standard transmission and only 12k on the clock ??? Its a miracle
ruclips.net/video/BCoQG4VnpFo/видео.html
My 14 year old E92 N54 only has 70,000 miles, some people just don't drive a lot lol
I bought mine when it was 12 years only and only had 12k on the clock
He bought it.
Awesome video - thanks.
In own a 2011. 128i convertible 90k These steps reset everything else but the service engine light did not go away.
I took it to the dealer and they ran diagnostics and said the oil sensor electronic module is returning error code. Estimated $675 USD
I requested them to reset for now via their tool and paid them for other repairs ( valve gasket and oil filter gasket) only. They waived the diagnostic fee $175
One year ago the same thing happened and the dealer said one ignition coil failed and i just replaced one coil and put new plugs since it was due anyway
In summary the issue can be anything so think before you spend and ask dealer or mechanic for reset and give it time before u spend money.
Hope this helpd guys
Life is so much easier to simplify than complicate. Brilliant stuff mate. Cheers.
Hi Vince I have a 2005 BMW 320i E90, I had the oil and filter changed last week as well as the air filter and brake pads also rear brake pad wear sensor.
I have the amber engine management light showing and the car had a fault code of 2B63 camshaft sensor, exhaust.....I have since changed the camshaft sensor and the light did go off and came back on after a few seconds, could you advise me as to what the problem could be or is it possible that the light will go off itself after the car has covered some miles?
Also thank you for a clear and informative video your time and efforts are appreciated thumbs up and a new sub from me 👍🏽
great information ,clear and easy understand thanks for your video it help me
a lot
Great steps my friend, I just reset my E93 M3 Oil/Brake Fluid Service lights. People who gave it a thumbs down are you know whats.......Keep up the videos...THX
Awesome video - thanks.
In own a 2011. 128i convertible 90k These steps reset everything else but the service engine light did not go away.
I took it to the dealer and they ran diagnostics and said the oil sensor electronic module is returning error code. Estimated $675 USD
I requested them to reset for now via their tool and paid them for other repairs ( valve gasket and oil filter gasket) only. They waived the diagnostic fee $175
One year ago the same thing happened and the dealer said one ignition coil failed and i just replaced one coil and put new plugs since it was due anyway
In summary the issue can be anything so think before you spend and ask dealer or mechanic for reset and give it time before u spend money.
Thank you!! I’ve watched so many videos and they were all wrong. This was the only I found that actually worked with my car. I need to save this video.
Thank you, you saved me dollars by this video.
Nice bro. Save my time for seeking the right video
Excellent video. Have subscribed your channel. Video explaining how to reset the vehicle check lights and oil change. This was exactly what I wanted to see and answered my questions. THANK YOU.
Excellent, thank you :-)
Superb Vince. Thanks so much
My Service Engine Soon light just came on. How do I know which item to reset on my 2008 E90? Thanks for this info on your video. Appreciated.
Philip
Thank you! Very helpful and accurate for me. 2011 E90/328i US
Thanks brother the video is very helpful 👍🏻
Thanks mate this was very helpful as it was brief and clear
Good job mate👍👍 good explanation
Thanks voor the video. A little sidenote. This only worked for me when the doors were closed.
Easiest video to understand on this, hands down. THANK YOU!
Thank you just had my local mechanic tell me I would have to go to the BMW dealership because they could not reset the service indicator for having replaced my micro filter aka cabin filter. They kept saying it was catalytic and never said catalytic converter. Again confusing because I was like what does the cabin filter have to do with catalytic.... . Either way it was one of those you are a woman probably don’t know much about cars situation. So I got home found this video less than 10 mins later was done thank you.
Excellent video!! This really helped me.
Fantastic !! Easy to follow👍Brilliant Thanks a lot🙏 you helped a lot of BMW driver a lot of money!!👌God Bless🙏🏻🙏🏻
GREAT ,NICE AND CLEAR EXPLANATION. STEP BY STEP GUIDANCE. IAM FROM INDIA. I HAVE DSC AND DTC ERROR CODES AFTER CHANGING BATTERY. PLS GUIDE ME HOW TO ERASE THOSE CODES. THANK YOU SIR.
One of the best I have come across. Thank you mate. I have just bought my 4th BMW and did not know how to reset it. Doing service myself. Brilliant.
To the point and super informative. Thx man!
Thanks for the video. Excellent !!. Thanks thanks. I reset just now and all the light is OK green. BMW 335i doble turbo 2009.
I have the same model in blue.
Perfect thanks mate from Denmark 😎👍🏻👍🏻👍🏻
Thanks man! I couldn't figure out how have the car on without the engine running.
Much appreciated. Thank you for taking the time to do these videos.
I’m from Colombia and it helped me a lot, thanks a lot 😊
For any chance do you have the vehicle manual ?
Many thanks. Just managed to get mine reset. Worked on a Z4 E89.
Thank You VERY MUCH. I been looking for this for my BMW 318.
How in the world could this video get 159 thumbs down??? Great info nicely presented. Many thumbs ups warranted and one from me ;-)
BMW dealership owners?
There's no logic or sanity involved when it comes to great RUclips videos getting thumbs down, don't even try to wrap your head around it.
YesUCan that could be just a simple mistake?
Thumb up
Some people just hate regardless😂
One of the best videos- thanks 🙏
It works. My 9-year old grandson reset the brake-fluid interval all by himself. 😉
Great! You have just showed me the way to save a lot of money. I appreciate that my friend! Take care man. Blessings to you!!!
AWESOME!! thanks. very helpful
Fantastic work. Keep it up 👍
Great info easy to do ,my car was serviced oil and filters before I bought it but reset not done
Very well made video . Thanks
Very informative and helpful. Go raibh maith agut
Brilliant video, thank you. Just back from dealer oil service with service light still on, refused to reset it fully as i didn't get brake fluid done too. If they told me beforehand i would have got fluids done but i do very little miles and didn't think it needed it. Tyre shine on brakes and tyres which nearly caused me to have an accident at the first roundabout leaving the dealer and noticed slight damage to my door after getting home. After complaining they said they'll reset for no charge. They charge for this simple thing????
My 2008 335XI Chimes a few times every time I start it. Is there away to turn those chimes off. I don't mind a chime if there's an alert, but would rather it not chime if nothing is wrong. Thanks.....Nice video also.
Thank you so much man! I had that stupid car lift service light on too for an "inspection" when I just had my annual inspection a few months ago! Saved me a wallet thinning trip to the mechanic for absolutely no reason lol
Thanks very much ..... so helpful.
I thought I’d need a science degree to work out the dash set up on my recently purchase 3 series 320D 😀
ruclips.net/video/BCoQG4VnpFo/видео.html
Best video to understand 👍🏽
Question : What does the triangle with the exclamation mark mean when you hold the trip-reset button? I have the same thing. Thanks for the video!
One thing missing from this, is close the door, took me ages to try to get rid of the ignition on warning lol
Thanks !
Graham Eida dam me too!!!!! Couldn’t figure wtf was going on thanks!!
Thank you so much! Those lights have been a tad annoying for a while haha
I have the X5 E70. I am guessing this method will also work?! Mine is currently flashing “vehicle check” but all the components (brake fluid, oil, front brake pads, rear brakes pads) are all showing “OK”. Does this mean that I don’t need to bring in my vehicle for any component change? Therefore resetting the “vehicle check” is valid to do now? Be great to get some insight.
Thanks a lot , mate! that was so helpful!! :-)..
Just have one question, the Break fluid / Engine oil indicator.. does it alert to Top up the oil or it says we need to completely drain and refil??
Thank you, great job on explaining , super helpful
Thanks Mr Vince ... from Ireland
Thanks :-)
Nice and clear spot on mate.......😃👍🏴.
Thanks a lot! Had my car MoT'd and they didn't reset the 'roadworthiness check' warning light. Not critical, as MoT info is now online, but warning light was annoying.
Hi buddy video very helpfull can I do the same on my BMW 120i convertable 2010 model thanks Trev in rainy cape Town south africa
Thanks so much for this video and the way you clearly explained things.
Nice job! i have BMW X1d 2011 model and its appear "service 10000" when stated and one day after it is showing " service 9000" what would be the problem
"
thanks, nice and clear video, to the point.
Great video mate. Really informative and very easy to understand.
Good video, very well explained. Thanks
Great simple well explained video. Thanks.
Works perfectly. Thanks.
Thanks Vince mate
Good job mate!!! Greetz from Poland.
Worked for a 2002 325i BMW, thank you. 👍
Thank you it worked!
I'm in the US, have a 2008 650, I had to push the start button twice or none of this worked. Also don't have the switch on the stalk, or the little clock animation during reset. I just used the trip button for everything. Thanks for the video would have been clueless how to do this.
Hi mate hope you can answer but I have the same car as was wondering if it’s normal for the engine light to be on while ignition on like it is with yours but goes off when engine started or is there a problem.
thanks my brother for the good information bomboclat
Thanks... worked like a charm!!!
Can you please make a video on diesel particle filter. Hoe to fix it if its showing on the secreen?
Thank you for sharing this valued information.
thank you your video was helpful Save me going back to my friend's garage👍👍👍👍👍👍
nice one mate. you literary you save me £25 as main dealer want it to rest it for me.BIG THANKS
hi, thanks for the video. I did the above for a exterior light issue. but now the service indicator is red, and saying brake pads and fluid are low. so I did the reset options for these, but to no avail. any ideas? thanks
Thank you...that helped....