How to Approach Bulky Foamed Pleats - Car Upholstery/Furniture
HTML-код
- Опубликовано: 6 фев 2023
- ✅Get our courses at: www.cechaflo.com
--------------------------------------
Sometimes, I have wondered how I would approach deep channels with a regular triple transport sewing machine.
The problem I have found is the presser feet which due to its shape cannot freely run in the deep channel. Therefore the solution would be to make narrower presser feet. The one in the video is a simple prototype that still needs to be improved to make sewing much easier. Anyways it works out.
As we can see, we are defying an almost 2 cm channel depth. It could be higher if we want.
Perhaps the most important content of this video is the motivation to be innovative whenever it is necessary and not to be afraid of creating or doing modifications.
I hope you find some inspíration in this video!
Cesar 
Авто/Мото
You inspire me. Your work is always so well done!! Thank you so much for sharing your knowledge whit us.
Espectacular! Maestro muchas gracias por sus grandiosas ideas, un fuerte abrazo
great little vid, thanks
Beautiful!
Trabalho prefeito.
Feito com muita técnica e profissionalismo em toda etapa da execução
Parabéns.
L'Amour du travail bien fait ❤
Muito bom trabalho, ficou bonito, parabéns 🪡🇧🇷🇧🇷
hello dear friend, good luck with everything
Gracias excelente su forma de explicar
Awesome 👏
Parabéns e obrigado, tudo de otimo.
Top irmão parabéns. Me inspiro em vc
Thank you jesus for
Güzel içerik olmuş 👍🏻
Danke dir
This man has the gift of being able to teach anyone I swear he could teach the blind on how to see !
Pfaff antiga, é a melhor máquina industrial.
Very good video, informative.I recently had a bench seat and back for a boat to do.I basically did the same as you,but do you have any tricks for when the piece is 50 inches wide and 30 inches high?It's a lot of material to squeeze under the machine
Perhaps a 'tufting method' for bigger pleats:ruclips.net/video/SRcQma5g1wk/видео.htmlsi=ph6nYR-0_bwpw5xJ&t=1736
Super Pozdrawiam
Great skill to learn though how do you attach to other panels once completed that don’t have foam pleats?
Like for example a seat center and attach side bolster panels
There are different ways to attach the pieces together. It is a little difficult to verbally explain. I would like to make a video to show the process. In this video I show one way that consists in sewing the channel's bags beforehand. The cut foams are put/pushed inside the bags after finishing the whole sewing of the cover:
ruclips.net/video/iD6GKDL3d3I/видео.html
Another similar way:ruclips.net/video/SRcQma5g1wk/видео.html
❤
Exelente consejo maestro, muchas gracias, una pregunta esa que tipo de máquina es??
Máquina de triple arrastre Pfaff 1245-706
ruclips.net/video/U3HBXBDDKoo/видео.html
The foam!?! Is it 1/2”&1/4” combined
Yes a combination of two foams. A standard upholstery foam on top (1/2" thick) In the lower position an Eva foam 6 mm thick.
Gostei a sua maquina de costura, Qual a marca e especificacoes? por favor!
Pfaff 1245-706/47, walking foot (triple transport), flat bed, single needle, industrial sewing machine
nice, i did this last year but i stopped to use it because i didn find a solution how i can integrate it in a motorcycle seat for example, because when you sew other parts over the edges it presses everything together and than it looks terrible, so im wondering for what exactely do you use these bulky pleats - car seats? any examples?
It is not an easy task to attach the pieces together if we follow the regular procedures all the upholsterers know. We would have to resort to some tricks I would like to share in a next video.
In these attached videos I show one way that consists in sewing the channel's bags beforehand. The cut foams are put/pushed inside the bags after finishing the whole sewing of the cover:
ruclips.net/video/iD6GKDL3d3I/видео.html
Another similar way:ruclips.net/video/SRcQma5g1wk/видео.html
Mr follow you
Exelente consejo maestro muchas gracias, esa que tipo de máquina es ????
How wide are the strips?? Are they closed cell foam?? I missed the measurement ! Thanks!!
ruclips.net/video/Je_-Y7cdlEU/видео.html
A layer of Eva (latex)foam at the bottom and an upholstery regular medium density foam on top.
Здравствуйте, скажите пожалуйста, что за пенопласт вы используете? В каких магазиназ его можно найти? Спасибо)
I have used two kinds of foam in this video. On the bottom a foam that is called Eva foam/Latex foam (it is used for tennis shoes insoles)
On the top I have used a 1 cm thick upholstery foam (medium density). This foam can be bought from Upholstery stores.
Unfortunately I am located in Mexico and I get these products from local stores.
@@Cechaflo спасибо вам большое за обратную связь. Сейчас редко кто отвечает. Это очень приятно. 😊
Excuse my English. What are the space weights of the two foams?
6 mm wide between the 2 foams, considering the presser foot width and thickness of the vinyl that goes inside.
@@Cechaflo Thanks and greetings from Germany
What pressor fot and thread did u use?
I manufactured the narrow presser foot (first testing prototype).
The second one made by hand is in this video:
ruclips.net/video/4eYokESGr8w/видео.html
A lathe/milling operator can quickly and easily make it.
The red material?? What is it called??
The red material is a thin canvas fabric. It could be another stiff and strong fabric such as muslin, velour, felt, etc.
А как вы лапки в одну линию перестроили
An old foot was useful. I cut off the excess.
Hlo sir you are machine model NMR and price
Pfaff 1245-706/47 (old version made in Germany) It is a used machine and its cost is 1200 USD approx.
What do you call that foot
It could be a channeling foot.
sir i am from india i will get visa to work in your place i also make vip seat
ruclips.net/video/yvVmVYp0XVY/видео.html
0.5 mm or 0.5 cm?
5 cm the channel width. 5 mm the gaps between the channels. Sorry for the mistake.
@@Cechaflo many thanks
Pareciera q está operando a alguien o q no vemos bien o no entendemos
the thread looks pretty thick for such thin material... but interesting presser feet you made.
Что это
Boa obra
Mercedes Benz will close his shop with this...there is better and quickest way to do this...check out 80s and 90s models