Polyurethane Bushings Explained & Tested!
HTML-код
- Опубликовано: 4 окт 2024
- Which Durometer Polyurethane Bushings are right for you? In this video, I explain what Durometer means, how to choose the right ones for your application, and how to easily swap them out. I also perform a Before/After Vibration Test in my 1995 Mazda Mx5 Miata to see if softer bushings help with interior NVH (Noise, Vibration, Harshness).
🔑 DISCOUNT Code DIR10 to SAVE 10% at store.awrracin...
🙋🏼♂️ Subscribe to @DriveItRyan if you liked this content!
Instagram: /
Facebook: / driveitryan
🧤Automotive Gloves: amzn.to/3tG84dx
🚘 Low Profile Jack: amzn.to/3jfTyVx
🤌 Pinch Weld Jack Pads: amzn.to/2WrUI7v
3️⃣ Ton Locking Safety Jacks: amzn.to/3kq1YsJ
◾️Frame Rail Jack Stand Pads: amzn.to/3sRAYGy
🧰 Tool-Kit I Use Every Day: amzn.to/3DjhD5W
🙌 My Favorite Tool: amzn.to/3mGJt5U
🔩Anti-Seize Used on Bolts: amzn.to/3sRTsXd
All Purpose Cleaner: amzn.to/3ojYevO
Microfiber Towels: amzn.to/3s8sLNW
Plastic Removal Tools: amzn.to/3IM2wUR
Media Equipment I Use for Videos:
🚁 Drone: amzn.to/30fnSZe
🎥 Canon Eos R6: amzn.to/3APRg5b
🛸 FPV Drone: amzn.to/3FLILvy
📷 Insta 360: amzn.to/3p0HKKe
🔭 Lens - RF 24-105 f/4L IS USM: amzn.to/2VaKSmf
🎤 Rode VideoMic Pro: amzn.to/346oSN4
📸 GoPro: amzn.to/34D8PaA
Neewer GoPro Mount: amzn.to/3p8WuV3
GoPro ND Filter: amzn.to/34zSnIg
👨🏼💻Laptop: amzn.to/2JC7rea
🎵 Music by Epidemic Sound
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting so I can continue to provide you with free content each week!
What a fantastic video Ryan! Thank you so much for all of your support. #TEAMAWR
Thank you all so much!!
What do you guys recommend tightening the nut and bolt that goes through the bushing? Actually don't have your guys' mounts but this info is missing from all the videos I've found and watched. Wish I did but went with innovative that did not come assembled so I just tightened them to fairly snug and installed but always wondered and never got an answer from them when I tried.
@@mccall9770 Hello! The thru-bolt on AWR mounts should be torqued to 55 ft lbs. All other fasteners should be torqued to OEM specs. There are install guides listed on our site for our mounts if you make the switch!
I have a 2024 ND3 Club and have been considering getting a set of these for mine, I’ve heard nothing but good things!
I prefer a softer fleshlight compared to a stiff one. Great install!
What durometer fleshlight you runnin?
@@DriveItRyan 40 shore
Loving Ryans Vibe meter........
Great video I run the 88 in my upper mounts and a 95 on my rear in my big turbo st. Love awr best customer service hands down
Thank you for your support Mike! We appreciate you!
They are the best! Great products by great people. 88 and 95 duro bushings are probably just right for big booost 💨
Great to see you back! Another great review of a solid product.
Thank you Dave! This last year has taken a toll on me but I am glad to be back. Any updates on the J Swap?
@@DriveItRyan will pull the engine after Thanksgiving. Most pieces of the puzzle are on site. Trans is in NC getting gone over/beefed up. Know any local powder coaters to recommend?
Great to see you back brother!
Thanks man!!
Interesting. I was going to go with 70, but if you feel the 62s have the same feel, I might just do that instead. Thanks Ryan.
(2001 NB2 1.8)
Man, I brought the rear motor mounts (88 Durometer) and the passenger motor mounts (72 Durometer) and the vibrations is awful. I ordered the 62 durometers bushings to replace them with so hopefully it'll help reduce the vibrations somewhat
ommmmmggggg.....sooooo luuuuuuv A great bush video....😛😛
Great to see you back Ryan....misssed ya sexy....
Drive it home....Drive it ryan...
And Mattchew da master...
Great vid Chaps..
N x
I never want to let ya down Neil! I sincerely thank you for pushing me to get it done. Let’s keep this momentum going!
Please film more videos bro!
Dude, where you been bro?lol.
Awesome video as per usual.
Thanks man! This year has NOT been great but I’m still fighting that good fight 👊 Hope you’ve been good dude!
My transmission mount recently went out in my 07 Speed. Depending on how these feel I may swap the rear JBR Solid mount for their rear mount. SOOOOO much vibration from a solid steel piece hopefully this keeps everything in place while easing up on the vibrations a little 😅
Hahaha those solid mounts must be brutal 😂 I’d highly recommend these!
Hambone!!! 😻😻😻
Hambone is taking his 10th nap of the day but I'll let him know he's loved when he wakes up 🤣
Another great video! Really like the look of your valve cover. Would you ever consider selling polished valve covers? Maybe with a refundable core charge?
Thank you! I do like that idea, but I would probably spend a ridiculous amount of time on them, and I worry that I’d get sent some that are in really bad shape. I would love to get into powder coating in the future, and offer polishing if the customer wants to pay for the labor involved. Check out the video I did if you want to tackle it yourself! It’s easy, but time consuming.
ruclips.net/video/qPQ1S9vyRk8/видео.html
Hambone is the shit. Him and Bandit need to chill
Haha I would love to see how that would go. It’s tough to call with cats 😂
The power of the pussy........... not to be under estimated...
p̶r̶o̶m̶o̶s̶m̶ 💔