Single and dual carbs are same when it comes to disassembling for anyone wondering. Good video, I like the rag idea and the exhaust bolts on the puller is a good tip I didn’t know.
Thank you for the video!!! Having a GTI from nineteen ninety something this hits close to home for me. Looking forward to the assembly vid now. Thanks again gents!!
I have a 717 I bought in pieces...would love to see a full re-assembly video so I can figure out where all these bolts go! Keep up the great content!!!
Hi man, i have a whole series of videos on how to re-assemble the 717 on my channel. Most of the are in portuguese (there are CC) But i am translating them to english as time goes by.
Thank you for this video. I have been trying to find the oil return port on and off for a few weeks with my engine in the boat. I thought it had to be somewhere near the top, but then you popped that exhaust off and its right there. Sucks that I'll have to disassemble the exhaust to get to it.
Thanks for all the great content. I am working on getting a friends skit back up and going after a few years as we have been boating vs skiing. Being pretty new to the ski thing and living in California, I have a question I think I know the answer to. Being as most all the lakes are getting picky with the oil injection skis. they don't make a 2 to 4 stroke conversion kit do they? if they don't would it be possible to but a 4stroke in a 2stroke ski. Obviously I would have to use the 4stroke computer and there may be some engine mounting work, but could you? Thanks for all the content again, I'm hooked on your channel now.
Thanks for the AP customs recommendation. I’ll try them instead of fullbore since fullbore stole my cylinders, took my money, and went out of business.
I had a question about what the plug/sensor was in between the spark plugs. I ran mine this morning and I noticed it was off wondering if it was anything important
Thank you guys so much for your videos, where do you recommend I get oil lines for my 95 xp, I think I have found the leak and it’s the big line that runs directly from the oil reservoir to underneath the carbs, I have the carbs removed and just need help sourcing a line with clamps. Any recommendations would be greatly appreciated 🙏
hello guys thanks for this great videos 👏i replaced the jet pump and fuel filters on my seadoo 2004 bombardier my fuel gauge quit working but i take it to the lake anyway so was working great make a beep sound ones in a while i though was fuel gauge , so i keep using it 30 min later shuts off 😰today i just did crompression test sound like something is broken plus one cilinder is only 30 psi so for sure something is broken feel like i can rebuilt this motor .but any idea what make this to happen
Hallo, my name is Klaus and i live in Germany. My Son has a Seedoo 717 from Rotax Bombardir. The Engine is need of repair. To repair the crankshaft we need a repair kit.Where can i get such a repair kit? Your Vidio is verry informative
I’m looking for a MPEM with DESS key for a 1997 Seadoo GTX, I’m having a really hard time finding one. If anyone knows where a person can find one or a good affordable aftermarket one, you two would probably know. I’m also in Canada haha
man my 2002 Sea-Doo gti is kicking my ass am hopping you can help me a bit! Back story I purchased to skis about two weeks ago never owned any 0 knowledge might have done a few boo boos I those first days of owning them I scared the web and I can say I think Iliana know a lot more now but am still pulling my hair with this sky I can’t get it to start ! When I purchased I didn’t start so obviously it help me to knock the price down it had a low battery at that time and first mistake I use my jump box to starter and still nothing, then I got home and in the next few day I tried to start it with the jumper add starter fluid and it did start for minor periods. Second mistake I didn’t know at that time that I had to start sky then water. Then water off then sky! I was trying to start it with the hose on and then of I was all over the place. Then I learn the cycle and said oh oh 😕 then I decided to buy a new battery because I learn that jumping the unit could damage the computer . So battery came in installed it connected my hose water off cranked it and boom sky fired right up turned the water on and I felt the idle was having issues felt to low so I started reving it a bit it satayed on for about 40 seconds to a minute and all of asl sudden I hear this grinding noice and. Off it goes and I haven’t been able to start it since then I check compression is like 120 both I check spark I see spark I added fuel in the carb and nothing it just cranks and cranks I’m thinking I might damaged the computer with the jump box but it did start once with the new battery?? Am going to put a link to clip that I just took hope you can help thanks ruclips.net/user/shortscibxirPk0Bk?si=tI30I1bY8n8in19-
I love how unironically I had to split my 717 a week ago and this came to me right in time
You're about 6 months too late, but this is awesome. Who knows I may need to overhaul the 717 again soon.
Single and dual carbs are same when it comes to disassembling for anyone wondering.
Good video, I like the rag idea and the exhaust bolts on the puller is a good tip I didn’t know.
Thanks for the video Nick and Crew.
Thank you for the video!!! Having a GTI from nineteen ninety something this hits close to home for me. Looking forward to the assembly vid now. Thanks again gents!!
Anxiously waiting for the rebuild video!
Backyard Brian totally could have JB welded that sleeve back together!
Great video. Love watching you bring these old jet skies back to life
Awesome video! Thanks so much
Perfect timing to help with my 96 sportster project. Great work!
Love you videos cant wait for the reassemble! Im gunna rebuild my 1995 xp 717 this winter.
I have a 717 I bought in pieces...would love to see a full re-assembly video so I can figure out where all these bolts go! Keep up the great content!!!
Hi man, i have a whole series of videos on how to re-assemble the 717 on my channel.
Most of the are in portuguese (there are CC) But i am translating them to english as time goes by.
Thank you for this video. I have been trying to find the oil return port on and off for a few weeks with my engine in the boat. I thought it had to be somewhere near the top, but then you popped that exhaust off and its right there. Sucks that I'll have to disassemble the exhaust to get to it.
Thanks for all the great content. I am working on getting a friends skit back up and going after a few years as we have been boating vs skiing. Being pretty new to the ski thing and living in California, I have a question I think I know the answer to. Being as most all the lakes are getting picky with the oil injection skis. they don't make a 2 to 4 stroke conversion kit do they? if they don't would it be possible to but a 4stroke in a 2stroke ski. Obviously I would have to use the 4stroke computer and there may be some engine mounting work, but could you? Thanks for all the content again, I'm hooked on your channel now.
Great video guys, When can we expect the reassembly video?
Thanks for the AP customs recommendation. I’ll try them instead of fullbore since fullbore stole my cylinders, took my money, and went out of business.
I had a question about what the plug/sensor was in between the spark plugs. I ran mine this morning and I noticed it was off wondering if it was anything important
Thermostat
So I have one, crank seals are bad. I’ve already pulled the motor and have it disassembled. You suggest getting a new crank or replace seals?
Thank you guys so much for your videos, where do you recommend I get oil lines for my 95 xp, I think I have found the leak and it’s the big line that runs directly from the oil reservoir to underneath the carbs, I have the carbs removed and just need help sourcing a line with clamps. Any recommendations would be greatly appreciated 🙏
osdparts.com/index.php?main_page=advanced_search_result&search_in_description=1&keyword=Line
Andrew just did my 947 and he was incredibly helpful and fast! Highly recommend! And thank you guys for the lead in the previous vids!
Spotted Cow! 🍺
Hell no its more fun when you guys have fun lol. He couldve at least put the motor on ice in the cooler 😂😂😂
hello guys thanks for this great videos 👏i replaced the jet pump and fuel filters on my seadoo 2004 bombardier my fuel gauge quit working but i take it to the lake anyway so was working great make a beep sound ones in a while i though was fuel gauge , so i keep using it 30 min later shuts off 😰today i just did crompression test sound like something is broken plus one cilinder is only 30 psi so for sure something is broken feel like i can rebuilt this motor .but any idea what make this to happen
Awesome. What is your plan to deal with the lack of fuel tanks available for the models that are under recall?
So if you can’t hit the piston bearing if reusing the camshaft how do you remove it ??
niceeee! from the #Netherlands
Thanks! 😃
is this like the rotax 800 in 1995 seedoo just a smaller bore?
Not entirely
Where do you get cranks rebuilt?
Contact Andrew with AP Customs. His FB page is in the description
When is the rebuild video coming?
How do you remove the steel gear kn crank and re install?
Hallo, my name is Klaus and i live in Germany. My Son has a Seedoo 717 from Rotax Bombardir. The Engine is need of repair.
To repair the crankshaft we need a repair kit.Where can i get such a repair kit?
Your Vidio is verry informative
WSM? Im not sure what you have available by you. SORRY!
When is the assembly video coming ? And if it is I will really appreciate if is very detailed 😂 hopefully I feel confident to tackle my 717 thanks
End of the month
I’m looking for a MPEM with DESS key for a 1997 Seadoo GTX, I’m having a really hard time finding one. If anyone knows where a person can find one or a good affordable aftermarket one, you two would probably know. I’m also in Canada haha
We could fix it for you but shipping would be costly.
How do you remove the oil injection pump?
Why are 7 videos hidden I was referencing the carb rebuild 787 video in diy playlist?
Those are on our Patreon now
man my 2002 Sea-Doo gti is kicking my ass am hopping you can help me a bit! Back story I purchased to skis about two weeks ago never owned any 0 knowledge might have done a few boo boos I those first days of owning them I scared the web and I can say I think Iliana know a lot more now but am still pulling my hair with this sky I can’t get it to start ! When I purchased I didn’t start so obviously it help me to knock the price down it had a low battery at that time and first mistake I use my jump box to starter and still nothing, then I got home and in the next few day I tried to start it with the jumper add starter fluid and it did start for minor periods. Second mistake I didn’t know at that time that I had to start sky then water. Then water off then sky! I was trying to start it with the hose on and then of I was all over the place. Then I learn the cycle and said oh oh 😕 then I decided to buy a new battery because I learn that jumping the unit could damage the computer . So battery came in installed it connected my hose water off cranked it and boom sky fired right up turned the water on and I felt the idle was having issues felt to low so I started reving it a bit it satayed on for about 40 seconds to a minute and all of asl sudden I hear this grinding noice and. Off it goes and I haven’t been able to start it since then I check compression is like 120 both I check spark I see spark I added fuel in the carb and nothing it just cranks and cranks I’m thinking I might damaged the computer with the jump box but it did start once with the new battery?? Am going to put a link to clip that I just took hope you can help thanks ruclips.net/user/shortscibxirPk0Bk?si=tI30I1bY8n8in19-
i have a 96 sea doo gts where can i buy an engine for it
Hii would like to know if you guys sell parts I am subscriber from Toronto canada
What's the most common problem on the engine
Poor maintenance really, these are bulletproof if you keep clean fuel and BRP oil in them
@@TodayWeWrench I use premium fuel and castrol blue oil in mine. Zero issues. Tuns great.
To soon, to soon. lol 21:43
i need one motor 717 how much is
We don’t currently offer customer rebuilds
Blue oil in rv=tcw3 oil…. Not good for seadoo… maybe that’s why piston exploded.
Been using super tech for a decade, only ski I’ve had issues with only ran name brand before I got it lol
Okay I must start a poll in the comments. Is it Katty whoumpus? or Kitty whoumpus?🤣
I say Katty.
It’s kiddy 😂
I farted