I got the 5 spoke Star TL 17" wheels for mine. They were a great price and i just am a 5 spoke kinda guy but the waffles are a good lookin wheel too. You can fix that camber in the back but it can get cumbersome if theres a lot of rust around that stock adjustment that you need to replace.
yooooo that looks sick, i have a wheel idea for mine that you should check out: 2023-2024 Acura integra A-Spec wheels 18x8 +35offset... looks like the perfect size and its oem design brough back to a bigger size for the integra and their black
Hey man, I just found your channel and I dig it. I have a question. I have a 2001 honda crv and the rpm jumps up and down after it warms up. Was wondering if you could give me some advice on some possible causes? If you find the time to get back to me, I would appreciate that. If not, life goes on. Keep rocking. God bless.
thanks for an awesome vid!!! question: where can i find a schematic to replace the transmission filter for my automatic, awd 2001 crv? i cant find anything at all using google. please help
Hey man I got a 97 crv my trunk didn’t wanna open I wacthed your video on the trunk it did nothing with the battery an wires before that It was not closing so I turn off the truck turned it on it clicked so I closed it now it don’t wanna open p.s. I looked in there I have a small box that say install bay I pulled off the cap water came out so would you say it’s a wire problem I was in the area under the steering wheel
I know it's not connected to your content, but I would like to ask about my crv..1996 model it's, I change 2x radiator same issue, the first one blow and the second one is has a cracked what is the issue of this one why it's always my radiator broken??thanks
I been gathering parts to do the same upgrade to my CRV, I finally got all the parts. My CRV has TLS waffle wheels. though i saw You posted a video with the waffle wheels, I did not see an update if the tl wheels worked without any extended wheel studs or spacers, if you can answer that? thank you!
Also, I think the Integra Type R 1 inch master cylinder may work with little to no mods. A bigger master cylinder is needed to get the full benefit of the calipers. Maybe If you get time you can experiment with that and make a video! much appreciated! If i get it first I will try and update you but I been tight on money. hence they it took me over a year to get the RL parts gathered lol.
They fit perfect without any modifications. I have a 1" MC on my other CRV with brembo calipers and it's trash compared to this setup. Your stock MC will do just fine.
Question: Do they sell the rotor by itself? like if I wanted to changed brakes and rotors. Do I have to buy the kit again. Or which other rotor would work with this kit?
@@hondaresource I hope he does. I will be buying my kit pretty soon and doing it. Also looking into doing a rear caliper conversion.. any idea where I can find that? Tired of them drum brakes
$495 isn't even bad for a big brake kit.. look up the cost for a big brake kit for an OBS Chevy.. and the cost for drum delete on the rears for an OBS..
I've driven both. This kit is LEGIT!!!!!! So much better than any other!
TL type s (waffles)wheels will be the look. 🔥🔥🔥
that may be the move!
TL wheels for sure. They would solve the problem and they look good.
I got the 5 spoke Star TL 17" wheels for mine. They were a great price and i just am a 5 spoke kinda guy but the waffles are a good lookin wheel too. You can fix that camber in the back but it can get cumbersome if theres a lot of rust around that stock adjustment that you need to replace.
I picked up some waffles yesterday. Mine is rust free 🤙
Ok If I were to watch the little longer, I would have seen.You got us from the junkyard sorry for asking lol
Looks good with the big brakes
Thank you
Wheel size I was going to ask but you covered it. 👍
Yessir!
yooooo that looks sick, i have a wheel idea for mine that you should check out: 2023-2024 Acura integra A-Spec wheels 18x8 +35offset... looks like the perfect size and its oem design brough back to a bigger size for the integra and their black
Man, That CRV looks like a great Lemons car! HMMMM Ideas! 🤣
rofl
Did you end up figuring out what was going on with the yeeter brakes. Last time I remember you had taken off the entire system?
yeah, they are good to go now. I was having prop valve issues.
Anniversary wheels from a 350z.
They might fit an their wider
Hey, I wanted to know.Do they supply the calibre and everything
Great 👍🏻 🙌🏻🙌🏻🙌🏻
Thank you!
Hey man, I just found your channel and I dig it. I have a question. I have a 2001 honda crv and the rpm jumps up and down after it warms up. Was wondering if you could give me some advice on some possible causes? If you find the time to get back to me, I would appreciate that. If not, life goes on. Keep rocking. God bless.
Typically either the fast idle valve or the idle air control valve.
Nice video that's fire 🔥🔥thx for info man question too which engine you recommend putting or suggest upgrading in a manual Crv rd1
My k24a2 rd1 has a lot more power than the b20
That aftermarket bracket is really thin on metal on the hole attached to RL caliper
He's been making these for a while. They are made from good material and shouldn't have any issues.
thanks for an awesome vid!!! question: where can i find a schematic to replace the transmission filter for my automatic, awd 2001 crv? i cant find anything at all using google. please help
🔥🔥🔥
Hey man I got a 97 crv my trunk didn’t wanna open I wacthed your video on the trunk it did nothing with the battery an wires before that It was not closing so I turn off the truck turned it on it clicked so I closed it now it don’t wanna open p.s. I looked in there I have a small box that say install bay I pulled off the cap water came out so would you say it’s a wire problem I was in the area under the steering wheel
Yooo, nice!
Thank you!
I know it's not connected to your content, but I would like to ask about my crv..1996 model it's, I change 2x radiator same issue, the first one blow and the second one is has a cracked what is the issue of this one why it's always my radiator broken??thanks
Possible that you have a blown headgasket causing pressure in the coolant system.
How do I check if it's blown gasket??
Nice!!!👌Will you be upgrading the rear also?
I'm not sure. I have rear disc on my other CRV
I been gathering parts to do the same upgrade to my CRV, I finally got all the parts. My CRV has TLS waffle wheels. though i saw You posted a video with the waffle wheels, I did not see an update if the tl wheels worked without any extended wheel studs or spacers, if you can answer that? thank you!
Also, I think the Integra Type R 1 inch master cylinder may work with little to no mods. A bigger master cylinder is needed to get the full benefit of the calipers. Maybe If you get time you can experiment with that and make a video! much appreciated! If i get it first I will try and update you but I been tight on money. hence they it took me over a year to get the RL parts gathered lol.
They fit perfect without any modifications. I have a 1" MC on my other CRV with brembo calipers and it's trash compared to this setup. Your stock MC will do just fine.
@@hondaresource thank you for the feedback! Will save my money and time.
Hi, I had a 99 CRV fwd the transmission can be convert to awd?
Price wise and availability wise, is their an advantage over the stocks apart from the obvious stopping power?
Just stopping power is greater
Are they better then the Brembo’s on the yeeter?
Yes due to rotor size
Would the 350 rotors work with the genesis caliper for my 15 wheels?
no. These rotors are way too big for those.
Question: Do they sell the rotor by itself? like if I wanted to changed brakes and rotors. Do I have to buy the kit again. Or which other rotor would work with this kit?
i have acure tl type s brembo .fs
youll need rsx type s hub . acyra type s rotor an brake pads . bolt right up . dont need a fastbrake adapter
I would think he would sell the rotor by itself.
@@hondaresource I hope he does. I will be buying my kit pretty soon and doing it. Also looking into doing a rear caliper conversion.. any idea where I can find that? Tired of them drum brakes
$495.😂
you have to pay to play man
Not really... it looks good no doubt of that actually i did follow on the rear disk conversion. Front is all good to me
$495 isn't even bad for a big brake kit.. look up the cost for a big brake kit for an OBS Chevy.. and the cost for drum delete on the rears for an OBS..
@@hondaresourceWhat year RL calipers do you use?
Rear to low...
It's going up