SolidWorks G Tutorial
HTML-код
- Опубликовано: 12 окт 2017
- sw-tc.net/#302 solidworks tutorial Servo motor
►SolidWorks Learning course (voice):► • SolidWorks Complete Le...
►SolidWorks Sheet Metal Lectures► • SolidWorks Sheet Metal...
►Our Playlists:► / sw-tcnet
►Our Website:►www.SW-TC.net
►Our channel :► / sw-tcnet
►Facebook:► / solidworks.tutorial.net
►Tutorials Engineer Channel: ► / @tutorialsengineer
►Engine1 Project :► • Project 10: V6 Engine
►Engine 2 will be completed on:► • Engine 2 project
►For more SolidWorks Tutorials: ► • SolidWorks Practical T...
►CATIA Complete Learning:► • CATIA Complete Learni...
►Inventor Complete Learning:► • AutoDesk Inventor Comp...
►SolidWorks Surface Lectures: ► • SolidWorks Surface Tut...
►Solidworks Sketch Tutorials: ► • SolidWorks SKETCH Tuto...
►SolidWorks Beginner Tutorials: ► • SolidWorks Complete Le...
►SolidWorks Sheet Metal Lectures► • SolidWorks Sheet Metal...
►SolidWorks Weldment Lectures:► • Playlist
►Available Playlists:► / sw-tcnet
►Learn Engineering Playlists:► / @tutorialsengineer
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
All dimensions are in mm/g/s/ISO - Based on true dimensioning.
---------------------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
----------------------------------------------------------------------------------------------
The uploading of tutorials is based on an accumulated studied plan!
----------------------------------------------------------------------------------------------
New to SolidWorks?! Recommended to watch my earlier uploads.
----------------------------------------------------------------------------------------------
I will be thankful to you for replying whom are in need.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Hello & Welcome to SolidWorks Tutorial Channel
This channel is dealing with EVERYTHING about SolidWorks aims to make the viewer a professional SolidWorks user! & to be helpful !
This Channel beside Tutorials Engineer contain topics about:
- SolidWorks Beginners Tutorials
- SolidWorks Sketching
- SolidWorks Surface
- SolidWorks Weldments
- SolidWorks Assembly
- SolidWorks Drawing
- SolidWorks Sheet Metal
- SolidWorks Mold Design
- SolidWorks Simulation
- SolidWorks Motion
And MORE
►►►SUBSCRIBE ?!◄◄◄
-------------------------------------------------------------------------------------------
GO PROFIST ...BE SOLIDWORKIST ◄ suggested words!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
----------------------------------------------------------------------------------------
★------ ۞ ART ۞ ENGINEERING ۞ CREATIVITY ۞ ------★
----------------------------------------------------------------------------------------
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Warm Thanks to them who supported and subscribed our channel in our very early start... All are nice but you are special!!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Viewers can contribute translated titles, descriptions, and subtitles/CC (with different languages)
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
OTHERS:
TO BE FILLED
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
■ if you feel want to give something in back : the minimum : Rate, comment, subscribe & share!!
You're helping me so much right now and I'm grateful for that!
the methods you are using to design parts are interesting for me as I believe it is organised and has a structure. thanks for this tutorial.
Excelent work!Grateful for all the free tutorial content,keep it up!
The motor scaling part stumped me for a year, and then I realized that it was after the part where you insert it
감사합니다.
Pls what tutorial shows how to scale the dc motor
Thank you .
Hi, I created 3D Iskis, made a transformation of objects, created a spline. lofted Boss / Base does not see 3D artifacts. And only when assembling the servo. If the microcircuit and the circular contacts, there are no more parts, the lofted Boss / Base works. It is worth adding other details and pairings as the lofted Boss / Base does not work, it doesn’t even make any mistakes, it just doesn’t see the 3D artifact at all. help what could be the problem. 2:03:06 You have added 3D artwork to the Profiles window, Nenya is not added, does not see artwork
Awesome! ) And if someone is wondering the artist and a song name - its a Pylot - Blurred Vision )
At 49:41 it didn’t work to mirror, because, it’s possible the whole part was whole, click the checkbox to uncheck - Unite the bodies. Also, if you can’t mirror, select in Copy Elements and select on the model (not from the list)
Hey, I've been making the parts from your amazing videos. I've encountered a problem however. I have the same version and edition of Solidworks as you i.e. Solidworks Premium 2016 x64 edition. At 1:28:07 here, as I attempt to make screw, and add the custom pitch of 0.30 mm as you do I get an error saying, "Operation failed due to geometric condition. Try reducing the length of thread or select a larger profile." This is a rebuild error. Are there any special settings that you have done to let it work for you? Because unlike you I'm getting this error. Can you please help me? Thanks! Great videos by the way. I'm kinda learning Solidworks from you. :)
Use Metric Tap
can you do a wondercube using solidworks next
Hey plz tell me how did you scale DC motor...
1:54:12 After completing this mate. The coincidence mate goes through the cover. Lower gear in view 1:55:19 on the right assembly imported goes through the cover. Did anyone had a similar issue? Please help me with this? I already checked the dimensions of all parts. Thank u.
Mantap😍👌👍
I was not able to create an electric wire 2:03:06 because, External links, the button was pressed (thereby blocking). I squeezed it out; 3D iskis began to work. Immediately created a detail of 3D artwork. But in the assembly, the loft did not work. But a separate part was able to complete the loft when the assembly was updated. Electrodes appeared. But why it doesn’t work in the assembly - External Links are to blame - which created the errors, I lost a lot of time because of this
excuse me.. good night I´m love it you work but i need somethings. How do you do scale the DC MOTOR, please
Hello sir i have some doubt on assembly of servo motor...
Pls help me...
Hello !! i wish you will be all right .first of all i want appreciate and thank to you for doing all for us. Your all tutorials are valuable and wonderful.You have all capabilities which should be . I made many components with the help of your tutorials now i am working on this tutorial but i am facing many errors.Can you give me your parts and assembly of servo motor.I will be thankful to you for this kindness. BE HAPPY !!
Can anyone tell the specifications of this servomotor like Torque range, weight,
Do you have a model of gear #4a and the box on the bottom?
how can ı scale the motor ?
How to scale DC motor?
hi im wondering if you have the files to this?
please tell us how can we scale the dc motor part i almost finished it but i can't do that part please reply me as soon as you can
help you please
where can i get this model?, i need 3 pieces from this pls
Получилось собрать Servo Motor, не удалось создать провода, так-как Бобышка/основание по сечениям не может увидеть 3д искиз который я нарисовал, почему-то когда микросхема подвешена не получается сделать электрические провода, а когда другие привязки, Бобышка/основание по сечениям видит 3д искиз, чудеса и пляски с бубном
Wooouw amazing
Can I get the soldwork files for this?
how to download solidworks please ?
Hello all! I was watching the video and at the end even your servo arm with all the gears started moving back and forth! I'm facing the same same issue! I don't know how to solve it. How did you overcome that issue! You have edited that part I suppose. Please anybody revert back with the solution
donde puedo conseguir las piezas ??
Necesito entregar mi proyecto urgente! y me tomara algo de tiempo
grabcad.com/library?softwares=solidworks&sort=most_downloaded&tags=servo
Lo conseguiste bro ?
Can we download your parts?
25:24 I followed your instructions but i can't make the sheet metal like the video please tell me how to fix it hope you reply me soon thank you
Same issues bro did uh find the way to do it....?
Please give us part drawing files to make it ourselves
11:00 i can't extruded cut.. Help me, please, maybe i have erro at Savs as Part
same goes to me, do you have any solutions?
i don't have @@.. this is my problem
The same thing happens to me, i can't extruded the cut, can someone tell me why please?
Thanks 🙏🏽
Can you give me the refence of the servo pls?
may i have the file for this
The assembly part is so confusing. I am trying to follow it and i'm so lost
Where can i find the DC motor part? Thank you very much :D
Here bro :)
ruclips.net/video/oboHOnBIXrY/видео.html
how am do i scale things?!?!?!
i need to know this. Idownloaded the dc motor from somewhere but it doesn't fix to our cover. Also cant scale it
Like
1:48:54
2:20:20
You are drawing wrong then you are trying fix it after an hour. This design takes a half hour. But it takes 2 hours because of you.
HI! :) 1:36:54 at this time you made this componet, in the robotic arm (ruclips.net/video/pVY0Wt4LXUs/видео.html)you sketched this component but circular. Can you help me with that component? Because I've no clue how to get the quote.
I hope you can hel me =)
Someone roll the files for me please
Plz reply me as soon as possible......
I´m Mexican