SolidWorks Tutorial # 306: Gripper
HTML-код
- Опубликовано: 11 сен 2024
- sw-tc.net/#306 solidworks tutorial gripper with the previous servo motor
►SolidWorks Learning course (voice):► • SolidWorks Complete Le...
►SolidWorks Sheet Metal Lectures► • SolidWorks Sheet Metal...
►Our Playlists:► / sw-tcnet
►Our Website:►www.SW-TC.net
►Our channel :► / sw-tcnet
►Facebook:► / solidworks.tutorial.net
►Tutorials Engineer Channel: ► / @tutorialsengineer
►Engine1 Project :► • Project 10: V6 Engine
►Engine 2 will be completed on:► • Engine 2 project
►For more SolidWorks Tutorials: ► • SolidWorks Practical T...
►CATIA Complete Learning:► • CATIA Complete Learni...
►Inventor Complete Learning:► • AutoDesk Inventor Comp...
►SolidWorks Surface Lectures: ► • SolidWorks Surface Tut...
►Solidworks Sketch Tutorials: ► • SolidWorks SKETCH Tuto...
►SolidWorks Beginner Tutorials: ► • SolidWorks Complete Le...
►SolidWorks Sheet Metal Lectures► • SolidWorks Sheet Metal...
►SolidWorks Weldment Lectures:► • Playlist
►Available Playlists:► / sw-tcnet
►Learn Engineering Playlists:► / @tutorialsengineer
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
All dimensions are in mm/g/s/ISO - Based on true dimensioning.
---------------------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
----------------------------------------------------------------------------------------------
The uploading of tutorials is based on an accumulated studied plan!
----------------------------------------------------------------------------------------------
New to SolidWorks?! Recommended to watch my earlier uploads.
----------------------------------------------------------------------------------------------
I will be thankful to you for replying whom are in need.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Hello & Welcome to SolidWorks Tutorial Channel
This channel is dealing with EVERYTHING about SolidWorks aims to make the viewer a professional SolidWorks user! & to be helpful !
This Channel beside Tutorials Engineer contain topics about:
- SolidWorks Beginners Tutorials
- SolidWorks Sketching
- SolidWorks Surface
- SolidWorks Weldments
- SolidWorks Assembly
- SolidWorks Drawing
- SolidWorks Sheet Metal
- SolidWorks Mold Design
- SolidWorks Simulation
- SolidWorks Motion
And MORE
►►►SUBSCRIBE ?!◄◄◄
-------------------------------------------------------------------------------------------
GO PROFIST ...BE SOLIDWORKIST ◄ suggested words!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
----------------------------------------------------------------------------------------
★------ ۞ ART ۞ ENGINEERING ۞ CREATIVITY ۞ ------★
----------------------------------------------------------------------------------------
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Warm Thanks to them who supported and subscribed our channel in our very early start... All are nice but you are special!!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Viewers can contribute translated titles, descriptions, and subtitles/CC (with different languages)
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
OTHERS:
TO BE FILLED
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
■ if you feel want to give something in back : the minimum : Rate, comment, subscribe & share!!
man
believe me you're great
and the thing that i love most in your work , i see that you control the tools like magic
and do whatever you want with the simplest way , it's always more simpler than my approach
keep going
I love how these dimensions are almost exactly the same as the ones I need for my project.
Thanks a ton for this, helped me out a lot
Can you plz send your project as I need reference to do mine
bhai please send share ur project i need ur help
I love your work and how well explained your videos are, they are really helpful :)
I thought at first, that I will have to watch the tutorial in 4x split screen mode. Glad it have not happened.
기계원리가 대단하십니다
그런데 기계만드는 과정이 쉬울거 같은데 생각보다 어렵네요
영상 잘보고 갑니다
La pieza que tiene como Gear4 es una que ya hizo y está en el video de Servo motor #302
Gracias amigo.
Bro… can u send these all parts in STL file format
기계 원리가 참 대단하십니다
Where can I get this Gear4 which you inserted from another project? I am modelling it for myself.
That is incredible! You helped me do my robotics homework. Thanks man. Just one question, how did you do the servo motor? I got to the video link but there is nothing on the page.
part 8 changes after you add gear 4 its no longer 0.8 dia after that what is the new ones calculations you didnt tell in the vid
Hi, where are you getting those dimensions?
Can I please get the Solidworks files and the assembly?
me too plz
@@kada3374 he didn't give
People who are searching for the Gear 4 (It is part of Tutorial #302: Servo Motor)
Japnit Sethi thank you!, you saved me
Many thanks bro !!
Where's part 4? Was this made from another video or is this like a pre-made part available in Solidworks already????
Thanks you soo mach.
You saved me bro
great job bro, inspired
May I have the file for this gripper?
Could you tell all parts with dimensions
For the first gear, when you grabbed it from the side bar, what Is the diameter of it overall? From the midpoint of the teeth to the other side. I don't have that on mine
Hi, how would you make this same gripper but without the servo motor, for example with a pawl or something similar to that?
Hey I'm looking for gear4 dimensions if could you possible shear link of gear4 dimensions part that will really helpful.
As per mention in video I refer both servo motor and DC motor but I can't find out.
Will you plzz help me in this that will be great .
I tried this one. The (Orange coloured) fingers are not aligning with each other. Aligning in the sence when I'm rotating the gears they are not coming at a position where they can touch each other. Can you please help me with that
where is gear drawing ? can you add me gear drawing ?
where do you find gear 4 ?
solidworks tutorial 302- first section has only gears (it's before even parts start).
Hii, really appreciate your work. Can you provide the measurement sheet for all parts?
Hello Sir how do you add that gear 4 in that Part-8 could you please help out in it.
You have website page?
Under construction
would this count as a four bar mechanism?
I have the same ? as
"Lucky Jenco". Where did you get the gear for part 4? Do you have the specs for that?
Oh never mind, I see its part of the Design Library
@@zadok22 hey
where can i leran solid works the basics?
can you Provide the design for 4 jaw gripper arm ?? it would be a great help !!
sr but where you get those Design Library
???
Hi Ares, you should update your toolbox by double clicking on it.. inside tool box he is using the ISO standard tools... there you can find those parts
Good job!
sir please share the 2D and 3D with me i need it
can autocad make those projects like the gripper?
How much weight can this gripper lift
Cómo hicieron para realizar los engranes,?
Vienen instalados en el solidworks, en el apartado de toolbox
Hi, he dibujado todos, solo que el diametro tiene el barreno de la parte 8 me parece que no es de 1mm
can i download the file of this project?
could you help me, please. to tell about component in every part.. thank you
Following this video, I made this Gripper ( without servo) by Solid 2020, the link is below. Tell me if I made any mistakes, thank you
drive.google.com/drive/folders/1NnMi0_mTujFCTwXJz52obHRgEJsO8pjk?usp=drive_link
link: drive.google.com/drive/folders/1NnMi0_mTujFCTwXJz52obHRgEJsO8pjk?usp=sharing
How can I assemble the parts except pins ? Is screw does work ?
Screw and nut
Part 4 essue
sir please provide me 2d and 3d drwaings in solidworks format i have only 2 days to make it so please help me.......!
Ohh nice
Can you just provide dimension file…??
Someone has already finished the project, i need gear4, i can't not do it, i hope someone can help me.
Thanks :)
me too need gear4 :/
@Daniel Espadas, @King Restless can u send your report if you had done by now as I need reference to do my project
Gear was not in mm size
Gracias me ayudo mucho saque 8 en mi proyecto xd
de casualidad aun lo tienes ? si es asi me lo mandas a este correo davg_97@hotmail.com (me gustaria comparar mi trabajo)
Lol
Pondrías enviarme también? Mi gmail es luccaxx12@gmail.com
@@david97g pudiste conseguir la pieza 4 ? del servo motor?
@@luccasmarchetti3553 pudiste conseguir la pieza 4 ?
Hanzhen harmonic gear , robot gear, , over 30 years experience
good but incomplete
Once the annoying music starts at the beginning, you know there will not be a verbal description
I have draw them all😍. Contact me if you need them
@@mariafernandaadamechavez2595 which gear?
36:29 gear 4,i need it too🥺
@@xinyuanjiang8947 send me your email
@@xs2278 can u send me too
s4saksham02@gmail.com
@@xs2278 can u send me too
s4saksham02@gmail.com
Half of components modeling not done ...👎
beaucoup trop de faute c'est chiant a suivre