01 Chevy silverado air injection system P0410

Поделиться
HTML-код
  • Опубликовано: 30 дек 2017
  • ¿Deseas seguir capacitándote? júntate con los mejores, sé miembro de AEV en donde encontrarás cursos desde básico a avanzado con más de 50 cursos, +100 casos de estudio reales, sesiones de preguntas semanales y más...
    NOTA : La apertura a membresías sólo durará 1 semana (del 25 de Febrero a el 3 de Marzo) así es que aprovecha.
    go.hotmart.com/G27906870R constantemente me preguntan que si conozco de lagun sitio de entrenamientos de buen nivel y si aqui les dejo los enlaces de automotriz en video.
    Algunos cursos que quizá te interesen :
    Curso Sistemas OBDII go.hotmart.com/F38403084O
    Sistemas de encendido go.hotmart.com/T38406259E
    Curso Bobinas DIS - COP go.hotmart.com/H38410236L
    Curso de Analisis de Gases de Escape go.hotmart.com/N38416270M
    Curso Osciloscopio Automotriz Completo go.hotmart.com/S29048588M
    Curso de Diagnóstico con Oscilogramas de Compresión
    go.hotmart.com/C38508047R
    Curso de Electricidad y Electrónica Automotriz Básica
    go.hotmart.com/G38374037B
    Curso de Electrónica Analógica go.hotmart.com/W32518045L
    Curso de Programación J2534 go.hotmart.com/F38416301W
    Curso de Redes y Multiplexado go.hotmart.com/I38402703Q
    Curso de Sensores de Oxígeno go.hotmart.com/O38588561O
    Curso de Sistemas de Seguridad Total go.hotmart.com/C36338301V
    Curso De Sistemas HEUI go.hotmart.com/Q38641606I
    Curso de Transmisiones Automáticas go.hotmart.com/R38409569M
    Curso de Vehículos Híbridos go.hotmart.com/E38409590C
    Curso de Virtualización go.hotmart.com/T38448469A
    Curso Definitivo de Diseño piezas con Catia V5 Part Design & Sketch automotriz Full HD go.hotmart.com/W27903743I
    Curso Módulos de Encendido go.hotmart.com/O38377421D
    Curso de Reparación de Computadoras go.hotmart.com/F38416285S
    Curso de Reparación de Computadoras (Nivel 2) go.hotmart.com/Y29628892A
    Curso Construye tu Probador de ECUs go.hotmart.com/J38642300C
    Diagnostico TOTAL en Common Rail Bosch go.hotmart.com/V38567341L
    Diagnostico TOTAL en Common Rail Denso go.hotmart.com/N38642189Y
    Diagnostico TOTAL en Common Rail Siemens go.hotmart.com/N38568086E
    Dianóstico TOTAL en Common Rail Delphi go.hotmart.com/U38420413O
    Paquete de Sobrevivencia para el Técnico go.hotmart.com/C38394247K

Комментарии • 24

  • @rrmech11
    @rrmech11 3 месяца назад +1

    Nice job. I'm a new subscriber

  • @King_Maxx7
    @King_Maxx7 2 месяца назад

    Saludos

  • @markferraro5250
    @markferraro5250 6 лет назад +1

    very good presentation Joel thank you

  • @detective_automotriz
    @detective_automotriz 6 лет назад +1

    Exelente video profe feliz año vendiciones

  • @toddmiller3387
    @toddmiller3387 4 года назад +3

    So what was the problem the rely or the pump????

  • @bobbyheenan4061
    @bobbyheenan4061 5 лет назад +2

    The OBD tests cannot complete if the fuel sender unit is bad because the system requires there be 1/3 - 3/4 tank of fuel in order for the tests to finish running. A bad fuel sender unit causes the fuel gauge level to fluctuate all over the place and therefore, prevents the tests from being able to run. It's a real bitch too because the fuel sender unit is a part of the fuel pump, meaning the whole pump must be replaced, which requires dropping the fuel tank (or removing the bed and doing it from up-top) which takes quite a bit of time and gets awfully costly. Hope this helps.

    • @JoelAutomotiveInaction
      @JoelAutomotiveInaction  3 года назад

      After I the air injection sytem was restore , run the monitor, my understood is the eval monitor is one of the very dependent of temperature and fuel level because they will pressurize the gas tank and they need to know how much volume of space is there to anticipate the amount of time is projected base on volume

  • @King_Maxx7
    @King_Maxx7 2 месяца назад

    Tienes numero yo tengo el mismo problema

  • @williamlewis4379
    @williamlewis4379 4 года назад +1

    Joel do you have the part number to replace air injection pump unit? I have a 2001 Chevy Silverado. Thank you

    • @JoelAutomotiveInaction
      @JoelAutomotiveInaction  4 года назад

      no I do not have it, I just worked on that vehicle

    • @williamlewis4379
      @williamlewis4379 4 года назад +1

      Joel are located in Southern Calif? My secondary Air monitor will not set ready for smog. My scan tool shows no codes or check engine light. Everybody i talk to just say to cold start your car 2-3 minutes every morning and it will set ready. Been 2 1/2 weeks now and it's still not ready. Any suggestions? Thanks

    • @JoelAutomotiveInaction
      @JoelAutomotiveInaction  4 года назад

      @@williamlewis4379 this sytem does not run the monitor on cold start, the way how they run the air injection tests is when cruising about 45 to 55 mph steady the ecm activates the air injection sytem and monitor the response of the 02 sensors. send me an email with the full information of the vehicle to send you specific criteria
      joel000c@yahoo.com

    • @williamlewis4379
      @williamlewis4379 4 года назад +1

      @@JoelAutomotiveInaction Joel thanks for your reply. I sent you an email. Thank you

    • @alexquezada510
      @alexquezada510 3 года назад +1

      @@williamlewis4379 hi did this work?

  • @dennisbochmann3820
    @dennisbochmann3820 6 лет назад +1

    My 01 Silverado monitor wt set code

    • @joelnavarro9339
      @joelnavarro9339 6 лет назад

      Dennis Bochmann
      what do you mean ??explain me

    • @dennisbochmann3820
      @dennisbochmann3820 6 лет назад

      Joel Navarro trying to smog, monitor says sec air and cat mom, has brand new cat driven about 300 miles, al shop say to drive it.

    • @joelnavarro9339
      @joelnavarro9339 6 лет назад

      Dennis Bochmann
      for air injeccion pay attention to vehicle speed and time I mention here
      for air injection , warm up vehicle complete , drive at steady 45 mph for 3 to 5 minutes, than back to idle , thotle closed, check monitor if not complete repeat steps.
      for cat monitor , vehicle warm, accelerate to 55 mph, maintaining that spees for 10 minutes, decelertate to idle, with the brake pedal depress on for 2 minutes , do not turn off vehicle check for monitor status if not ready repeat steps
      ,

    • @joelnavarro9339
      @joelnavarro9339 6 лет назад

      Dennis Bochmann
      did you get those monitors to run??

    • @dennisbochmann3820
      @dennisbochmann3820 6 лет назад

      Joel Navarro so t set code for sec air