As I work or build out a new setup I remember all the little things you pointed out over the last year. For whatever it’s worth you’ve taught me a lot and I appreciate these videos and your thoughtfulness in explaining all the details. Hope you kill it this season.
I really love all your videos! I'm in Miami and, most of the time, I do the pressure washing by myself. You have helped me so much in my path to better myself! God bless you and give you tons of work and health! Thank you for sharing your knowledge!
Hi Joe, Thanks for explaining the x-jet nozzles. Very helpful to me and probably a lot of other new guys who are going to get into this type of business. Michael C - (WA)
Sweet! I'm starting off with a 2500 psi gas pressure washer and the Northstar 5.5 gpm soft wash 12 volt set up. SO EXCITED. Thanks again Joe for all the info!
Good stuff Joe, great explanation for the new guys! Love my j-rod but i did buy a turbo nozzle for small areas of brick or concrete after seeing you use one. I also started using a foam cannon, fill it up with bleach and soap (hot mix) for those little add on jobs people want sometimes like a quick roof wash on a shed. I don't usually do roof washes so it saves me from having to make mix a batch of roof mix. Works great, goes on thick and doesnt move and does a pretty good job with cleaning.
I really enjoy all your videos. Learned alot. Can’t wait till you get blend valve hooked up. Just one big favor. Could you please turn the background music off or down. please. I’m having a hard time hearing/understanding you.
Oh no. I have been using the X-jet M5 twist as my primary downstream soap & rinse nozzle for this whole season..... joe, this video has completely flipped my world upside down! I have been under the assumption i am pulling 10:1..... its back to the lab tomorrow, i will have to do a flow test. As always, THANKS
Good content brother! Very helpful information for the new fellas, and even then guys like me who’s been in the game a while. I love my Xjet, use it often Scott
I’m just starting and initially I will probably stick to flat work. In the event I want to start house washing and considering I don’t have any soft wash equipment now, what would recommend would be the best to start (12v system, downstream with a Jrod, x-jet, etc)?
I haven't had a lot of luck depending on the pull of the chemical injector or the "venturi" effect, especially when on a lift or using extensions. I also have a separate low pressure 200 psi system that I'm wondering whether I could just use that every time and, if so, regardless of the tip would it pull chemicals? If you know, please respond. Thx.
Hey Joe, great video but was curious on why you choose to rinse with a different tips/nozzle rather then a ball valve style on the end of your hose? Just curious if it would be easier to soap with the m5 as you explained and then remove and rinse with the ball valve?
Hey Isaiah. One main reason is I don’t use a ball valve on my set up. We don’t do a lot of flat work so rarely swapping guns. I may give soaping and rinsing either the ball valve a try later this season
Hey great channel!! Can you use different chemical running through the x jets. Or down streaming. For example you mainly use sh but want to use a degreaser. Or a tougher product like for oxidization. How do i spray other chems?
Great content! I will be placing an order for an Xjet (nozzle assembly only) tomorrow! Question for you: Are there any added parts or modifications I'll need to make to use the Xjet for rinsing only? I will be using it on a 4000/4gpm belt-driven pressure pro (for context).
Sorry for all the questions. Ive been doing flat for 3 years and Im adding downstreaming vertical this year so Ive been watching all ur vids to learn. I bought an x hadn’t got it yet but now im wondering if i threw away $140 cause if im understanding u right a j rod does the same as a x jet? Thx for ur videos. Ur amazing at putting this very help info out there. Any additional thoughts?
@@powerfulimprovements Hi Joe, I have basically the same question. Starting out in Arizona, curious if J-Rod is sufficient to softwash a house, or If both the J-Rod and X-Jet/M5 Twist are needed as well as a J-Rod.
Hey man all the Xjet that I've looked at comes with different color fittings. Is that what I need ? Or do they make one that doesn't need the little fittings
Those little fittings are proportion or’s. Each one has a different size hole. And it controls how much chemical is drawn. I personally don’t use them at all. And I just run my Barb wide open.
What's the difference between using a shooter tip and a 0070 tip? Does a shooter tip jist give you an extra inch of distance? What did you pay for the shooter tip?
Thanks for the information. I was wondering if the M5DS nozzle turned off soap when you made it to a super high stream and this video explains it. A question i have is what psi are you getting with these nozzles? Would they make marks on vinyl? Im still googling it, but wanting to make sure im not beating up peoples houses before i try
@@powerfulimprovements thank you for the response. My biggest problem im running into is that i live in Alaska and locally i have no access to 12.5%SH The highest i can find thats not 25$ a gallon is 7.5-8.5 and i have an internal debate on if thats going to be a strong enough mix with my downstream injector or if i should buy the m5 first. I am thinking the m5 with a self contained bucket will allow me more versatility though i could understand that you would want both in a perfect world. What are your thoughts?
Joe, does the M5 twist draw at the same rate as the M5 Xjet? I've got a 4gpm machine and was wondering what my percentage would be if drawing straight 12.5% with the M5 twist?
What if you put the your downstream injector at the end of your wand and then put the m5 twist nozzle on the end of that? Would you get the same results as the x jet?
Basically just a cheaper version of the x jet and you don't have to go back to the truck if you're not changing tips to rinse you can just disconnect the chemical injector right there and put the nozzle back on. Also then you have your chem bucket right there to see when you're running low. Idk I'm new to this I just started last month so I'm still learning haha
It just seems like the x jet type nozzle may reach higher places than my J rod? Idk tho I'm just basing that on watching RUclips I don't have an x jet type nozzle yet to test out
Good morning joe, John from Long Island here. I am interested in getting a 12 volt the stealth 7gallon a minute everflow pump set up . The only thing I’m confused with is a sales rep from a powerwash company said the batteries only last about 2 hours, is that true. I know I have to buy a deep cell marine battery . Can you advise me on this concern. Thanks John Bacotti
Hey John. My deep cycle battery sometimes last for days. Maybe if you ran it for two or three hours continuously straight nonstop that would be it. But that’s not how it’s done. You only run out for about a half an hour for a job.
Can you use the x jet nozzle with a 12v pump, if it fits the quick connect? I made the mistake of ordering just the x jet nozzle alone on google and it won’t fit my quick connect for my pressure washer. It’s way too small but fits on my 1/2 inch soft wash hose quick connect
@@powerfulimprovements The x jet nozzle fit my gun! I tried it on a 3/8 quick connect earlier, and it didn’t fit, so I assumed it wouldn’t fit my gun. Forgot my gun has the 1/4 quick connect on. Doh! 🙄
@@powerfulimprovements yessir wow. Haven’t done that in a while lol. I just rinsed with the x jet like you said you like to do. A customer wanted some leaves blown off their pool screening so I just rinsed as they asked for no chemical. Boy it worked wonders! I thought it may be too strong for the screen, but wow I was wrong. I’m waiting on the M5 twist so I can soap with that. Thanks for all the info brother.
@@powerfulimprovements i found there the m5 twist but i search xjet for a 5gpm machine and i cant find it. Can u provide me with the link i would appreciate.
I plan on applying my chemical only with the softwash system... using the mixer valves... what are your thoughts with a 2 or 3 story home using that? You think that plastic blue twist nozzle would reach those heights with a 5gpm ? I see guys using them with 5gpm softwash systems all the time but I’m not sure about the total height it can shoot up
Hey joe quick thing , I hear you always say power washing but what you are doing is pressure washing. I actually found out there is a difference, pressure washing is what we do with our machines as to power washing is when your doing the same but with hot water , so in reality we are pressure washing not power washing , I love your content brother keep it up
@@powerfulimprovements oh no brother thank you for making such great content , I’m sorry to have told you about that . I’ve built my business down here in Miami watching your channel , thank you for showing what you do and how you do it 👍🙏
I really love all your videos! I'm in Miami and, most of the time, I do the pressure washing by myself. You have helped me so much in my path to better myself! God bless you and give you tons of work and health! Thank you for sharing your knowledge!
As I work or build out a new setup I remember all the little things you pointed out over the last year. For whatever it’s worth you’ve taught me a lot and I appreciate these videos and your thoughtfulness in explaining all the details.
Hope you kill it this season.
Much appreciate it
Good video. Look forward to your daily videos Joe! You have come a long way brother. Proud for you. Wash on!
I really love all your videos! I'm in Miami and, most of the time, I do the pressure washing by myself. You have helped me so much in my path to better myself!
God bless you and give you tons of work and health! Thank you for sharing your knowledge!
Thank you, thank you, thank you.
I’m new to the biz and in all my research, you’ve explained the difference between the nozzles the best, thank you!
No problem
Hi Joe,
Thanks for explaining the x-jet nozzles. Very helpful to me and probably a lot of other new guys who are going to get into this type of business.
Michael C - (WA)
You’re welcome
Really great content thanks for the tips Joe 👊🏽
That was an awesome vid!!
Packed with great information🤓💪🏼
Thank you
Great video and clear explanations! Thanks
Sweet! I'm starting off with a 2500 psi gas pressure washer and the Northstar 5.5 gpm soft wash 12 volt set up. SO EXCITED. Thanks again Joe for all the info!
And the x jet
@@pressurewashingchainsawmas8118 way to go
I love these videos..your rig looks killer!!
Thank you!
Good stuff Joe, great explanation for the new guys! Love my j-rod but i did buy a turbo nozzle for small areas of brick or concrete after seeing you use one. I also started using a foam cannon, fill it up with bleach and soap (hot mix) for those little add on jobs people want sometimes like a quick roof wash on a shed. I don't usually do roof washes so it saves me from having to make mix a batch of roof mix. Works great, goes on thick and doesnt move and does a pretty good job with cleaning.
Foam cannon is another super versatile tool
@@powerfulimprovements it is, its a little gimmicky but for certain applications it works well.
Great video and helped me figure out what I wanted to buy. I appreciate it.
Excellent
Great explanation Joe 👍
Thank you so much for this video!
I really enjoy all your videos. Learned alot. Can’t wait till you get blend valve hooked up. Just one big favor. Could you please turn the background music off or down. please. I’m having a hard time hearing/understanding you.
Sure thing!
Oh no. I have been using the X-jet M5 twist as my primary downstream soap & rinse nozzle for this whole season..... joe, this video has completely flipped my world upside down! I have been under the assumption i am pulling 10:1..... its back to the lab tomorrow, i will have to do a flow test. As always, THANKS
Reach out if you’d like 860-942-3855
@@powerfulimprovements thank you sir
great video Joe!! simple love it
✌🏼❤️
Thanks Joe! Good morning from Utah.
✌🏼
Good content brother! Very helpful information for the new fellas, and even then guys like me who’s been in the game a while. I love my Xjet, use it often
Scott
Thank you Scott
Again, a very informative video. Thanks for share my friend.
Enjoyed the video, great explanation on the 3
Glad you enjoyed it
Good review bro, m5 x jet is also a guideline for gallons matched to your pressure washer 😀
A year later and you helped me out. Just made my purchase of the Twist
😂✌🏼❤️
Good video Joe I wish I know this information I started
✌🏼❤️
Great vid...great tutorial !!!
💪🏼💪🏼
I’m just starting and initially I will probably stick to flat work. In the event I want to start house washing and considering I don’t have any soft wash equipment now, what would recommend would be the best to start (12v system, downstream with a Jrod, x-jet, etc)?
Thank you!👍✌️
Thank You 👍
Very Helpful
Thanks much
AWESOME DEMONSTRATION!! 100%
Thank you
Great video
Thank you
Thanks man your the G.O.A.T!!
✌🏼❤️
Yea i picked up a new twist dont really need to pull anything jus rinse
I haven't had a lot of luck depending on the pull of the chemical injector or the "venturi" effect, especially when on a lift or using extensions. I also have a separate low pressure 200 psi system that I'm wondering whether I could just use that every time and, if so, regardless of the tip would it pull chemicals? If you know, please respond. Thx.
Thank you for the excellent information.Everything seems to be a secret in this industry.
No doubt
Good video 👍
I rinse with sane tip, I put the chemical line In a clean water bucket to rinse out the line anyways, I have a xjet m5 #7 tip
Yep.
Hey Joe, great video but was curious on why you choose to rinse with a different tips/nozzle rather then a ball valve style on the end of your hose? Just curious if it would be easier to soap with the m5 as you explained and then remove and rinse with the ball valve?
Hey Isaiah. One main reason is I don’t use a ball valve on my set up. We don’t do a lot of flat work so rarely swapping guns. I may give soaping and rinsing either the ball valve a try later this season
thanks for that
Just subscibed. any difference in distance between m5 and x... how many feet? How many feet on J. Does soap and rinse reach same height? Thx Man!
😂 I got thee same exact set up on my J-rod too !
💥
Joe great videos but why the background music....
I’ll be dropping it out in next videos
Hey Joe should I plug the Barb on my ex jet or does that add some agitation.. I'm just using it for rinsing with my 4 gal per minute like you did
I never plugged mine
Hey great channel!! Can you use different chemical running through the x jets. Or down streaming. For example you mainly use sh but want to use a degreaser. Or a tougher product like for oxidization. How do i spray other chems?
Xjet is ideal for spraying multiple products
Great content! I will be placing an order for an Xjet (nozzle assembly only) tomorrow! Question for you: Are there any added parts or modifications I'll need to make to use the Xjet for rinsing only? I will be using it on a 4000/4gpm belt-driven pressure pro (for context).
Plug and play
@@powerfulimprovements APPRECIATE YA!
Sorry for all the questions. Ive been doing flat for 3 years and Im adding downstreaming vertical this year so Ive been watching all ur vids to learn. I bought an x hadn’t got it yet but now im wondering if i threw away $140 cause if im understanding u right a j rod does the same as a x jet? Thx for ur videos. Ur amazing at putting this very help info out there. Any additional thoughts?
Call me later. 860-942-3855
@@powerfulimprovements Hi Joe, I have basically the same question. Starting out in Arizona, curious if J-Rod is sufficient to softwash a house, or If both the J-Rod and X-Jet/M5 Twist are needed as well as a J-Rod.
Which insurance companies insure a soft wash business? I can't find anyone. HELP!
that works with 4 gallons per minute?
Hey Joe, will a Davis shooter tip draw soap? I was wondering if I could soap and rinse with the Davis shooter tip for 2nd and 3rd stories.
Yes sir. It is a soaper
Whick numbers are your tips on the jrod? Im lacking a high reaching rinse tip
Get a Davis Shooter tip
Hey man all the Xjet that I've looked at comes with different color fittings. Is that what I need ? Or do they make one that doesn't need the little fittings
Those little fittings are proportion or’s. Each one has a different size hole. And it controls how much chemical is drawn. I personally don’t use them at all. And I just run my Barb wide open.
Hey Joe, have you used X-Jet for roofs early on? How did it work out if so?
I know you're wicked busy today with 6 jobs 👍 hmu later when ya can!. WashOn
What's the difference between using a shooter tip and a 0070 tip? Does a shooter tip jist give you an extra inch of distance? What did you pay for the shooter tip?
You get a few more feet with a shoot a tip.
Hey Joe quick question where did you set up your bypass for you downstream after or before
Before
Thanks for the information. I was wondering if the M5DS nozzle turned off soap when you made it to a super high stream and this video explains it. A question i have is what psi are you getting with these nozzles? Would they make marks on vinyl? Im still googling it, but wanting to make sure im not beating up peoples houses before i try
M5 Is pretty much the industry standard these days. It has a very large orifice and only puts out about 150 psi.
@@powerfulimprovements thank you for the response. My biggest problem im running into is that i live in Alaska and locally i have no access to 12.5%SH The highest i can find thats not 25$ a gallon is 7.5-8.5 and i have an internal debate on if thats going to be a strong enough mix with my downstream injector or if i should buy the m5 first. I am thinking the m5 with a self contained bucket will allow me more versatility though i could understand that you would want both in a perfect world. What are your thoughts?
@@bhhacker have you looked at the Xjet?
Which one shoots soap higher?
The shooter novel on the jrod or the m5 twist ?
Shooter
Do you need a special license to apply SH? Good video!
Not currently
Even when you pull your downstream hose and rinse with the m5 won’t it still pull air through the downstream whole??
Yes it will still pull air. If you can, drop it into water tank
Can't you still use the x-jet m5 to rinse by just turning the soap off at the valve on the soap line ?
Absolutely. If you turn the soap off you can rinse with anything
Do you have to leave the bard on it or can it be removed and the hole plugged?
It seems to work best unplugged
Where you get that jrod
Southside Equipment
Whats the point of getting a downstream bypass injector if you can change from soap to rinse with just the J-rod/m5 ?
Better flow when you by pass the restrictions of the injector. More gpm to rinse with
Plus the 2 story rinse tip is a little dangerous lol.
Joe, does the M5 twist draw at the same rate as the M5 Xjet? I've got a 4gpm machine and was wondering what my percentage would be if drawing straight 12.5% with the M5 twist?
The m5 should pull at least 10:1 with your set up
@@powerfulimprovements TY!!
I see the bar on the xjet it's bigger than the one I have. Do you have a link for that where I can buy it? Thanks for vid
Kleenrite
@@powerfulimprovements Kleenrite
All i use is that blue tip... Am i missing out on distance??
Maybe a little
What if you put the your downstream injector at the end of your wand and then put the m5 twist nozzle on the end of that? Would you get the same results as the x jet?
You could. But why
Basically just a cheaper version of the x jet and you don't have to go back to the truck if you're not changing tips to rinse you can just disconnect the chemical injector right there and put the nozzle back on. Also then you have your chem bucket right there to see when you're running low. Idk I'm new to this I just started last month so I'm still learning haha
It just seems like the x jet type nozzle may reach higher places than my J rod? Idk tho I'm just basing that on watching RUclips I don't have an x jet type nozzle yet to test out
@@anthonyross9053 do you have a shooter tip
Where did you get your tips?
Southside Equipment
Good morning joe, John from Long Island here. I am interested in getting a 12 volt the stealth 7gallon a minute everflow pump set up . The only thing I’m confused with is a sales rep from a powerwash company said the batteries only last about 2 hours, is that true. I know I have to buy a deep cell marine battery . Can you advise me on this concern. Thanks John Bacotti
Hey John. My deep cycle battery sometimes last for days. Maybe if you ran it for two or three hours continuously straight nonstop that would be it. But that’s not how it’s done. You only run out for about a half an hour for a job.
Ok great thanks joe
Can someone put a link for that j-rod with the long rang can’t find that one. I can only find the og j-rod with all short tips. PLEASE HELP ASAP
Davis shooter tip
@@powerfulimprovements thanks for the fast reply ! love the content, not lying! new favorite washer.
@@willmad8532 much appreciated!!
Thanks a lot for you explaining
Can you use the x jet nozzle with a 12v pump, if it fits the quick connect? I made the mistake of ordering just the x jet nozzle alone on google and it won’t fit my quick connect for my pressure washer. It’s way too small but fits on my 1/2 inch soft wash hose quick connect
I don’t believe it will work
@@powerfulimprovements The x jet nozzle fit my gun! I tried it on a 3/8 quick connect earlier, and it didn’t fit, so I assumed it wouldn’t fit my gun. Forgot my gun has the 1/4 quick connect on. Doh! 🙄
@@adamg.3138 brain fade
@@powerfulimprovements yessir wow. Haven’t done that in a while lol. I just rinsed with the x jet like you said you like to do. A customer wanted some leaves blown off their pool screening so I just rinsed as they asked for no chemical. Boy it worked wonders! I thought it may be too strong for the screen, but wow I was wrong. I’m waiting on the M5 twist so I can soap with that. Thanks for all the info brother.
@@adamg.3138 love it
Can you drop the link of where to get the m5 and xjet.
Kleenrite
@@powerfulimprovements i found there the m5 twist but i search xjet for a 5gpm machine and i cant find it. Can u provide me with the link i would appreciate.
I plan on applying my chemical only with the softwash system... using the mixer valves... what are your thoughts with a 2 or 3 story home using that? You think that plastic blue twist nozzle would reach those heights with a 5gpm ?
I see guys using them with 5gpm softwash systems all the time but I’m not sure about the total height it can shoot up
My 5 gpm 12 volt hits 30 ft no problem with jrod tip
@@powerfulimprovements never thought about buying the jrod for the softwash system. I’ll have to look into that. I appreciate the help!
Bro I love the videos but hate the music
I really appreciate that feedback. A couple guys have said the same thing. And I will no longer be putting music on the videos.
SOOOO happy to have found you. Please kill the music though. We want to hear you, not the music.
Thank you. Mixed reviews on the music 🤷🏼♂️
Hey joe quick thing , I hear you always say power washing but what you are doing is pressure washing. I actually found out there is a difference, pressure washing is what we do with our machines as to power washing is when your doing the same but with hot water , so in reality we are pressure washing not power washing , I love your content brother keep it up
Ahhh. Thank you for clarifying that. I guess it’s just habit. Most people think/relate to the term power washing. I’ll try to clean up the term
@@powerfulimprovements oh no brother thank you for making such great content , I’m sorry to have told you about that . I’ve built my business down here in Miami watching your channel , thank you for showing what you do and how you do it 👍🙏
That's a expensive soaper
Yeah. But it’s the best
I really love all your videos! I'm in Miami and, most of the time, I do the pressure washing by myself. You have helped me so much in my path to better myself!
God bless you and give you tons of work and health! Thank you for sharing your knowledge!
Always like hearing this ✌🏼❤️🙏