How to install 2018 & up Sea-Doo Bilge Pump Kit (Part 1) | S2E10
HTML-код
- Опубликовано: 28 авг 2024
- Keeps engine compartment dry. Includes bilge pump, mounting bracket, bilge fitting, hose and hardware necessary for installation.
Any how to questions, please leave a comment!
shop.sea-doo.c...
INSTALLED A TOGGLE SWITH TO INTERUPT THE PUMP> Great video. I installed mine but I also installed a water proof toggle switch (ran it through/ under the storage compartment for easy access without having to remove the seats). I just interrupted the positive wire. I didn't like the pump running all the time; draining the battery and noisy.
Exactly!!!
Do you have a pic of how you installed the toggle switch?
Right go across the street to tell someone to quite down while your filming ?? I bet that would not go well. Good job on the install. Good video even with the grinding noise.
Shouldn't you disconnect your battery before messing inside the fuse box?
Great video guys very informative, with the pump running constantly would that burn it out i wonder how long they last ? And lets say for instance u are taking on water and you are from from home do you think you can make it back with this pump ?
Thanks for watching. The pump is designed for wet and dry pumping so it won't burnout. I've put about 30 hours on my PWC and the pump is fine. Its suppose to keep you afloat until you get to safety. I've never taken on water so I' assuming at this point!
Isn’t that tube you connected to made to auto bilge your ski while the engine is running? The only thing the electric bilge does is pump the ski out while the power is keyed on but your engine isn’t running. It won’t help you get your ski back to shore if you have a leak.
You need to be moving as well in order to start producing vacuum suction and It's always good to have extra safety equipment when on the water!
Just bought 2024 fish pro trophy, im having my dealer install this Bildge pump ..
Why doesn't seadoo use an auto bilge pump? I don't like having g it run all the time. Also 100 bucks vs 500 bucks. And the 100 dollar one is better
Any idea if this works on 2018 GTR-X? I don't see a fuse box in this location. Only find one by battery and cord is not long enough
Thanks for watching our channel and hope the below information helps you.
shop.sea-doo.com/ca/en/295100681-bilge-pump-kit.html
SKU 295100681
The fuse box is beside/attached to your battery inside a black plastic box.
This unit will require you to drill a hole to expel any water.
Hope this helps!
So this pump is running constantly , so basically you don't know if the pump is working or not , the only way to find out is to take on water and see if it's pumping ??
Correct, the pump runs continuously, the only way to know its working is the sound the pump makes. No way to know if your taking on water as the pump expels the water under the Sea doo near the exhaust. Some folks find it pump noise annoying while trying to fish, etc.
@@adventurechannelcanada And what is the service life of this pump ?
It has 1 year warranty. I have 50 hours on it and fine.
Y not just add a float between the fuse box and pump?
I noticed that the label on the pump stated that it was a 24 volt DC pump. Is your electric system 24 volt or 12 volt?
The Sea Doo is hooked up to a 12V single battery. This bilge pump works properly for both 12V and 24V, even though the pump has a marking of 24V on its body. It will work normally on the 12V of your vehicle.
Nice lol
Thanks!
Hi guys having trouble locating the instructions don’t seem to be available on the brp instructions site , i have a 2018 RXPX and all looks the same apart from the fuse box - does not appear to be a bilge pump fuse , assuming i may need to pick up power from another fuse any advice would be appreciated !
Never mind looked again with my glasses on bilge pump fuse is there 😂
Hi where i can find the instruction
Hi , All manuals are located on the seadoo website, under owner zone, find parts.
Does it pump thow like have you tested it out
I haven't actually water tested it. Do you think I should?
@@adventurechannelcanada up to you I have the same one I just don't know if will pump out water thow
You know what, I'll try it and post a video to show how it works.
@@adventurechannelcanada он постоянно включён что-ли? Включил зажигание и насос постоянно работает пока включено табло?
2 problems with this setup:
1. Looks like it pumps out through the jetpump area. Thus, you wouldn't know it was pumping and that you have a problem. I prefer the pump water outlet be visible. if you see water coming out; you know you have an issue right away and to get to shore asap.
2. Only works if the key is attached. If you were docked somewhere and away from the ski, it won't turn on.
Help me install mine pls
Sure, reach out to me by email.
@@adventurechannelcanada what's the e mail
I'm from mississauga area
Can you get back to me pls with an email🙏🏽
Hi Joe, just seen this post, sorry for the late reply. My email is SL@bell.net