Simple Clamping Jig with Plywood & Bolt [woodworks]
HTML-код
- Опубликовано: 30 сен 2024
- Hello, this is Dekay.
Today I have made an clamping jig that can be used to aggregate woods to make cutting boards. enjoy the video.
Please leave a comment, subscribe and like it. it will be a lot of help. =)
▷E-mail : dekayking@gmil.com
I finally made this jig a year ago and it works fantastic! The only change I made is the use of melamine on the top surface. The glue comes right off and I'm not wasting so much tape and having it end up in a landfill. Thanks, Dekay!
This is one of the nicer clamping boards for gluing up cutting boards. Do you have plans for this jig?
Идея хорошая, но вот сверху прижать склеиваемые детали необходимо, т. к. деформируется склейка
Спасибо за совет. Я буду беспокоиться больше
Muchas gracias por el aporte, es una muy buena prensa ... Podrías poner las medidas por favor ? Gracias y Saludos !!!
Excelente ideia. Obrigado 🫂 🇧🇷
nice! Perhaps a built in storage solution for the parts, i.e. the nuts and bolts, and those blocks? well done!
Bonjour, je viens de vous découvrir et c'est l'une des meilleures inventions personnelle et bravo. Mais ne serait-il pas encore mieux de renforcer les 4 petits bois (serrage 40mmx80mm) avec de petits rails de guidage (T-Slot) pour éviter de les voir bouger et se soulever pendant le serrage? Je vous remercie pour le partage des idées car on apprend toujours de quelqu'un dans la vie, Merci depuis Paris
there are many variations on this design but "simple" is not the word I would use here seeing how convoluted the build is, but the end result works well.
Just found your channel recently. Great videos! Suggestions for the clamping table: Several coats of polyurethane would prevent the need for packing tape for glue spills.
Also in your next project, when you drive the pin nails in, slant the nail 30 or 40 degrees. The nails won't protrude on the other side thus saving you a little time.
Anyway great job and great idea.
Thank you very much =)
👍👍👍
Muito top parabéns pelo seu trabalho esse gabarito ficou show muito obrigado por te colocado a legenda ficou mas fácil de entender o projeto.( Brasil)
Thanks for the sub-titles it helped me a lot, I am old, LOL. Keep up the great videos.
I glad to help you. Thanks =)
Nothing 'wrong ' with this solution..... but there are simpler ways of doing this...just saying.
All that to make a 1-by-6? Anyway, I'm making a panel clamping jig to make oak panels. None of that massive amount of labor was required. It's just a 24" square of plywood with small cleats on two edges. The clamping pressure is from tapping in several wedges. No big bolts, no embedded hex nuts, no gluing up piles of wood, no moving parts. Uses C-clamps to hold down glue joints.
i like this smart tips 1:47
another great idea and exactly something that I was looking for to solve my problem. Thanks once again
thank you for sharing. that was the best version of a clamping system like this that I have seen. you can change back fence. and the using the screws in the clamp feet to keep the bolts from piercing thru the wood is good idea. great job. thank you
Thank you too =)
Thank You...Great Clamp....
Thank you :-)
Most sensible clamp design i ever saw.👍
Very nice. I will build my own soon.
Thank you. I look forward to it.
The 3 blocks seem to be lifting up as you tighten. I couldn't tell but are the faces of the blocks cut on an angle to offset the lift ? Seems like if there were some way to "capture" those blocks in place so all of their force is directed towards the wood instead of losing some to upward movement, it would be better ? Still a nice idea.
Nice clamp. Here in California we pay $55 - $65 a sheet for plywood. For us the solution would be to just buy cheap clamps.
Such expensive equipment. So much qualitative wood wasted!
How much is the cost to build one? Is it cheaper than to buy the real clamps?
Genial 😁
Gracias.😃😃
Bonjour,
Ingenieux systeme de serrage.
Cela donne des idées.
Merci pour votre travail de précision et votre partage.
Cordialement.
Max Bout la Bricole 🔨🔩👍📐🔧👏👏👏
Bonjour. Merci aussi.😉😉😉
Gracias
Great project. Congratulations
Для изготовления простого зажимного приспособления нужно много НЕпростого электро инструмента.
Hai nice video with indonesian sub..
Thanks fot share, peace from indonesia.
Great jig. Just finished mine. I love the set screw in the blocks. I did forego the bolt patterns on the table for three t-tracks. Easily adjustable, and moves up against the fence keeping the blocks in place when storing. Looking at adding a bridge to keep the glue ups from arching up.
Okay, I'm sold, you have yourself a new subscriber! 😍😘
Thank you !!!😊😉😀😁😄😃😆
Molto ingegnoso👏👏👏👏👏bravissimo
ah, the good ol' body weight clamp @1.25
Thank you :)
Cool idea 👍
Thank you :)
Hi,
Well done.
Thanks for sharing.
Willy from Belgium.
🙏🙏🙏
Thank you too :-)
Красавчик!!!
おはようございます、この作品の対策は何ですか？ ありがとう
Trop bien... Nice project. I like it!!!
🤣🤣🤣🤣
Could you put the plans and measurements of the boards? Also the deep socket set you used on the bolts and nuts, where did you get that? What are the bolt dimensions?
👍 👍 👍
Belo projeto parabéns.um abraço.
Thx =)
Nicely done ahjussi...
와...트리머로 육각볼트 대가리를 판건가요?
네 천천히 해보니 어렵지 않았어요 =)
Could you please put it in English, Thank you!
Ingénieux
Merci pour le sous titrage en français, bravo pour l'invention, c'est toujours un réel plaisir de regarder vos réalisation!
Merci beaucoup.
🌷
I would have shortened the bolts that go through the bottom....so you dont have to screw those nuts endlesly for nothing every time again
Надо себе такое сделать. Молодец!
Спасибо!
👍👍👍👍👍👍
😀😁😄😃😆
That looks great you just saved me a lot of money as I was about to go out and buy another 12 clamps which are both costly and they take up a lot of space especially during the clamp up stage 😲😁👍 By the way I love that nail and screw storage device which you showed at 1:46 😁👍
That a kool screw organizer
They never leave links where to find all the hardware or even the name of the hardware.
👍
Thank you 😃
Как ты это всё придумываешь?)))
❤️👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🙋🏻♀️🇧🇷muito obrigada pela tradução.
progetto molto interessante e funzionale... bravissimo very interesting and functional project ... very good
Grazie Mille.
Nice one Mr. Dekay.
Awesome thank you just what I need and I can make it 👍
Своим китайским инструментом не пользуется. Макита, Стенли, Девольт - только не китай. Хотя может эти его инструменты китайского производства.
О чем ты говоришь?
Я кореец
Thank goodness for subtitles is all I'm saying
Me gustaría ver donde guardas los tornillos muy bueno esta tendrías que hacer un vídeo de eso felicitaciones
That's a cool pushstick...do you have a video on making that???👍👍👍
Thanks =)
Are you talking about this?
It's been a long time ago
ruclips.net/video/6zLdB3zil_E/видео.html
Nice design! Very well done!
Excellent
Mantap bang ide nya
Супер!! Молодец!! Мастерская класс!
Nice idea 💡💡💡💡💡 and I can use whatever Scrap I have
Thank you so much :)
Хрень полная. Куча телодвижений и траты материала. Результата можно достигнуть меньшими затратами, теже ваймы и то на порядок лучше. Вобщем изврат какой то.
Спасибо.
The first two cuts sounded like "Little bitty pretty one" by Thurston Harris. Like if you kinda hear it 😂
Why not use two t-tracks to give more than 3 set clamping widths
there's no reason
Is it because I do not have t-track
You have an incredible creativity, I like all your videos, thank you very much for sharing your ideas
Thank you =)
합판은 주로 어떤건 쓰시나요
일반 미송 합판 12T 입니다~
Relaxing Dekay?! Incredible!))
Good tool for reasonable price
Thank you :)
good, congratulations for the channel
Thank you so much :)
nice build, the only question i have is, after you glue an press the wood together, you dont have something on top to keep it from bowing upward while you do the pressing?
I never thought of it
I'll upgrade as you say next time.
Thanks =)
Merci pour les traductions françaises.
Très intéressant et inspirant toutes ces idées
Muchas gracias por compartir tu conocimiento. Justo lo que andaba buscando para un proyecto que estoy por realizar. Saludos desde México
Muchas gracias.😀
Nice and clean job
Thank you :)
Nice , a very smart and simple clamping jig.
Thank you :)
good morning what are the measures of this piece? thanks
Millimeters. =)
The extra deep drill piece used to screw the bolts, what is that called and where did you get them?
search for nut socket bit =)
Чудовий задум і виконання!
Excelente prensa amigo muy buena opción de ajuste y precisión gracias, quisiera pedirte fabricarás un sistema de afilado de sierra de disco para Sierra de mesa, te lo agradecería, saludos. Luis de Peru
Hola Gracias.
Grande👏🏽👏🏽
wow what a fantastic idea , thanks for sharing
Thank you too :-))
Спасибо за хорошее видео и идею !
천! 재!
감사합니다 ~~
health to your hands
Thank you =)
Thanks for share with us this video.
Its so simple to do.
Merci beaucoup.
Tipp für Nachbauer, die Schrauben kosten ein Schweine Geld, nehmt lieber eine Gewindestange das tut es auch verklebt die Mutter mit Epoxidharz.Gutes Video und mach weiter so.
Danke für einen guten Tipp.😄
Briliant idea! Cool work. More pls :)
Thank you :-)
Очень даже нужная тема
Молодец! Отличная работа, хорошего настроения, удачи!
Спасибо.
And with the clamps ?
As usual, excellent!!!
Отличная работа! Отдельная благодарность за субтитры!
Спасибо.😃
Too much advert so not enjoying video
Use youtube premium. no ad, no waiting
@@dekayscrafts Correction - RUclips Premium ;)
@@Tosnowood haha Thanks :)
@@Tosnowood
Correction to the correction 😁😆
If you meant using uppercase Y and P, then I draw your attention to the fact that you should write it as RUclips-- not RUclips 😄😃😀
Again a very good Jig. Top
Thank you :)