Hola, lo que haces es increíble, tienes un talento maravilloso y es extraordinario ver algo tan único. La verdad es que no soy tan bueno como tú, pero hermano para ver lo que haces me inspiró. Así que me desafié a mí mismo y comencé a aprender poco a poco viendo otros videos tutoriales aquí y descubrí, créeme, esto fue lo que más me sirvió. Porque encontré un lugar donde puedo obtener el plan o el proyecto de carpintería en el que puedo pensar y lo mejor es que puedo tener todo detallado y a mano. Gracias, me diste inspiración y ahora soy un hombre nuevo. Sigue dando luz en el mundo que necesitamos talentos como el tuyo.
Great project! I am going to try and build one. One possible upgrade to this would be to add additional table clamps to either or both extension tables so you can use stop blocks.
I was searching for an answer to my problem and you have given it to me, as well as saved me hundreds of dollars. Thank you very much. This subscription is the most helpful one I have! Keep it up, I will always watch.
Como sempre um serviço melhor que o outro. Mais o que ainda continuamos querendo de Você é que possa Disponibilizar seus projetos com planos para que nós que adoramos seu serviço , podermos também Fazer. Fica aqui meu apelo e também um grande abraço. E que muitos projetos possa vim pela frente !!!
This is brilliant. I'm going to use a shelf pin jig on the base to drill holes every 1/4 inch, to make repeatable cuts. I see in your other videos you removed your clamp downs, any particular reason? Were they getting in the way
Thank you for your wonderful video. You inspired me to do woodwork. I have build my workbench with your sizes and from your DIY video. It looks so easy what you do and everything fits right away :D But when i do it, i need some trys before. Keep going, in like what you do. Greetings from Germany
Excelente aunque un soporte para poder desplazar los tubos como unas ruedas o unos pedazos de madera en la base para que se extienda sin problemas. saludos
I don't have a miter saw and right now, limited on money to get one. This may be the answer I need for my very small shop. Until you find a way to make it work here, it doesn't do miters, but it will do great quick cross cuts for long material.
Dekay you are amazing, thank you so much for this idea, tools are very expensive and I only have a circular saw, with this jig I will work better with it, thanks a lot! Greetings from Chile :)
Nicely done! I wonder if you could make the top section only (that holds the saw) rotate so that you would be able to cut any angle up to 45 degrees? Just a thought...........
Я себе сделал что-то подобное. Только идеально ровного реза так и не добился. Направляющие длинноваты (около 70см) или люфт вала у Metabo такой. Буду переделывать.
@@MxSoM Возможно и геометрия подошвы не идеальная. Теоритически всё должно работать нормально, но очень много факторов которые которые могут изменять результат. Я давно убедился - если хочешь чтобы детали выглядели идеально и подходили друг к другу без зазоров, нужен дорогой инструмент.
What an excellent idea! I am a wood working newbie and don't have big space either. This design saved me from buying a mitre saw! Thank you for sharing 😊👏
App K just cut inserts at 45 or any other angle to rest between the material being cut and the flat brace against which the material rests. You can cut any angle with this design
I wanted to know if I could get the cut list for your Expandable Circular Saw. I will be glad to pay for it. Please let me know how I can get that from you. I do smaller projects and this would be a life saver for me. I look forward to hearing from you on this
Muy estupenda la Idea amigo, Pero una advertencia nada más: tenías wu haber puesto un sistema de aspiración para él polvo que produce al hacer los Cortes, no crees tú, ...?? Por lo demás ingeniosas ideas, ...!!!! Saludos amigo, ...!?!?!?
![[woodworking] Expandable mobile workbench for mitersaw](/img/1.gif)
To call this man a handy man is quite an unintended insult
I would say
This Man is a Smart Smart Guy !!!!
Hola, lo que haces es increíble, tienes un talento maravilloso y es extraordinario ver algo tan único. La verdad es que no soy tan bueno como tú, pero hermano para ver lo que haces me inspiró. Así que me desafié a mí mismo y comencé a aprender poco a poco viendo otros videos tutoriales aquí y descubrí, créeme, esto fue lo que más me sirvió. Porque encontré un lugar donde puedo obtener el plan o el proyecto de carpintería en el que puedo pensar y lo mejor es que puedo tener todo detallado y a mano. Gracias, me diste inspiración y ahora soy un hombre nuevo. Sigue dando luz en el mundo que necesitamos talentos como el tuyo.
This is really great. I would like to see a miter saw variation. Which I guess I can figure out from your design. Thanks
Thank you =)
Great project! I am going to try and build one. One possible upgrade to this would be to add additional table clamps to either or both extension tables so you can use stop blocks.
good !
감사합니다 ^^
I was searching for an answer to my problem and you have given it to me, as well as saved me hundreds of dollars. Thank you very much. This subscription is the most helpful one I have! Keep it up, I will always watch.
Thank you very much.
Come to play often =)
good job...
Thank you =)
Подписался. У вас интересные и полезные идеи. Хорошая работа!
It is not clear what these high stands are for.... It was perfectly possible to do without them.
This. Very over-engineered.
This is such a great design.
Do you have plans for this and other projects available to the public?
I'm sorry, all the images in the video are
I didn't make detailed drawings, I imagined =)
Yes, I love the design. some measurement would be nice.
Como sempre um serviço melhor que o outro. Mais o que ainda continuamos querendo de Você é que possa Disponibilizar seus projetos com planos para que nós que adoramos seu serviço , podermos também Fazer. Fica aqui meu apelo e também um grande abraço. E que muitos projetos possa vim pela frente !!!
Waw that’s cool
The only thing left is to make that cut up to 45 degrees and you will never need a mitre saw again!👍🏻
okay i wll Thank you =)
Muito limitada essa geringonça. Só serve para cortar "pauzinhos".
Lo veo simple y muy viable.Lo voy a experimentar.Muy agradecido.
Muito bem feito,agrega mais recurso para o uso da serra circular,parabéns
Obrigada
This is brilliant. I'm going to use a shelf pin jig on the base to drill holes every 1/4 inch, to make repeatable cuts. I see in your other videos you removed your clamp downs, any particular reason? Were they getting in the way
Thank you.
The clamp was temporarily removed for replacement. =)
Seems like it would work better if you could wire the motor to run in reverse..that things got massive tear-out..
A la hora de hacer un trabajo grande creo que la echarás para un lado y usarás la sierra de mano
Si claro tal vez
Pero soy un principiante cuyos pasatiempos están haciendo
Estoy bien incluso si no lo uso
хорош станочек. лайк мастеру.
Спасибо
Thank you for your wonderful video. You inspired me to do woodwork. I have build my workbench with your sizes and from your DIY video. It looks so easy what you do and everything fits right away :D But when i do it, i need some trys before. Keep going, in like what you do. Greetings from Germany
Thanks a lot =)
Excelente aunque un soporte para poder desplazar los tubos como unas ruedas o unos pedazos de madera en la base para que se extienda sin problemas. saludos
Buena idea Gracias
I don't have a miter saw and right now, limited on money to get one. This may be the answer I need for my very small shop. Until you find a way to make it work here, it doesn't do miters, but it will do great quick cross cuts for long material.
Thank you =)
Super good
... does a 45 ° angle work on your table? thanks
Thank you =)
A supplementary 45 degree front fence would allow for this
Bell'idea e ottimo risultato complimenti
Mille Grazie
깔끔한게 멋지군요.
시간도 공간도 없어서 구경만 하고 있지만 언제 기회되면 나도 따라 만들어 보고 싶습니다.
댓글 감사합니다 ^^
Thats a fuc*ing miter saw you have made 😍
I love your work. Actually am watching your old videos. But I just want you to know that am new in watching RUclips videos
Спасибо , все круто, возьму на заметку
Спасибо за теплые слова
Dekay you are amazing, thank you so much for this idea, tools are very expensive and I only have a circular saw, with this jig I will work better with it, thanks a lot! Greetings from Chile :)
Thank you =)
Love his work
Bom dia, gostei deste gabarito que você vez muito bom ótimo gostaria de fazer um para mim você teria as medidas para me mandar. Parabéns você é ótimo.
Obrigada
Como se llama esa prensa? Gracias buen video
Like to make one..thank sir..
Nicely done! I wonder if you could make the top section only (that holds the saw) rotate so that you would be able to cut any angle up to 45 degrees? Just a thought...........
I'll add that feature later.
Thank you =)
А можно пожалуйста чертежи
Wow.......what an excellent idea. Will build one as soon as I can get some plywood.
If you made this wider you can get rid of the table saw....lol. Nice work
lol I'll be careful
good idea.l like it so much.
Good idea... PVC is light , cheap and strong. I will use it for my truck storage.
Thank you =)
Thanks! I need one of those!
buenas tardes amigo me gustaría las medidas me gusto bastante tu diseno
Lo siento
Todos los dibujos en el video son
Las dimensiones utilizadas mm
Прикольно! Но это же по сути торцовочная пила? Видео смотреть интересно
Да, это так. Я сделаю лучшие инструменты позже
Я себе сделал что-то подобное. Только идеально ровного реза так и не добился. Направляющие длинноваты (около 70см) или люфт вала у Metabo такой. Буду переделывать.
@@MxSoM Возможно и геометрия подошвы не идеальная. Теоритически всё должно работать нормально, но очень много факторов которые которые могут изменять результат. Я давно убедился - если хочешь чтобы детали выглядели идеально и подходили друг к другу без зазоров, нужен дорогой инструмент.
정말 멋진 작업이예요. 저고 나중에 작업실 생기면 하나 만들고 싶어용. 너무나 창의적인 아이템입니다. 근데 혹시 직각자랑 삼각자는 어디꺼 쓰세요??? ^^;;
스마토라고 쓰여있네요
동네 철물점에서 샀어요 ^^
Parabéns!
Fiz uma também.
Good idea sir
Thank you =)
Excelente Gig ,vou fazer pequenas alterações, parabéns nota 10.
👍🇧🇷🇧🇷🇧🇷
Olá. Vc sabe o nome desse grampo que é aparafusado na bancada.
thanks found it
Cut an angle? Not
Cual es la medida de la base
Preciso de uma dessa!!!
it's an awesome job. how wide could a board go in this contraption?
The wider the middle board, the longer the pipe can be and the more you can expand.
You can make it whatever you want.
Haw about efisiensi?
may I know the size for the length and width? please answer. the question
영상 잘보고있습니다~~굿!!👍🏻👍🏻👍🏻👍🏻
감사합니다~
brilliant design and excellent tutorial video
Thank you =)
👏🤗🇧🇷
Thank you =)
Я подписался, настоящий мастер👍
Спасибо большое
Amazing!
Where did you buy your watch? :)
GRACIAS POR EL VÍDEO Y APORTE, EXCELENTE TRABAJO....
Gracias Gracia
Realy clever way to do it. Excellent.
Thank you :)
Super
Plans
What an excellent idea! I am a wood working newbie and don't have big space either. This design saved me from buying a mitre saw! Thank you for sharing 😊👏
Hi, nice tool. Please do another video to make it to do 45° cut
App K just cut inserts at 45 or any other angle to rest between the material being cut and the flat brace against which the material rests. You can cut any angle with this design
Ok I will Thanks =)
Thanks for the good answer =)
nice. Did you consider a dust collection port? Curious how you would implement that.
Love this channel and I love how your brain works! Please keep it coming!
А почему название на руском? Автоперевод?
иоутубе функција.
Прикажите наслове на језицима за сваку земљу.
На енглеском изгледа Американцима.
I love this. Is there a building instruction?
LOL thanks you have just solved a problem for me.
I'm gonna make it, but for a metal cutting saw.
Thank you =)
@@dekayscrafts Well done, it's awesome!
Love the projects and this one in particular. Is there ever any cut lists for them?
Все хорошо но трубки ПВХ не надёжные. Можно их использовать как скользящие фтулки по металлу
more glue for god of glue!
(больше клея богу клея!) )))
hm.. why not?) - more strength
(почему нет? - больше прочности).
Loving your channel! You’re a real handyman!
멋지네요. 잘보고갑니다. 궁금해서 여쭤봅니다.원형톱가이드레일은 어떤소재이며 어디서 구매할수있나요? 나무로 만들어서 대충쓰고있긴한데 나무가 힘을주면 약간씩휘어서 정밀도가 떨어져서 바꿔보고싶네요. 독학중인 초보입니다.
안녕하세요~ 반가워요
레일은 스텐레스 절곡집에서 얻어왔어요
기성품은 아니구요
'스텐레스 코너비드'라고 검색해보시면
비슷한 형태의 기성품이 여러가지 나올거에요~
@@dekayscrafts 아네 감사합니다. 한번 찾아봐야겠네요. 감사합니다.
타일가게에있습니다..
@@topicbox60 오호 감사합니다.월요일에 바로가봐야겠군요. 좋은정보감사합니다.
타일가게에서 코너비드라는걸 사서 장착해봤습니다.그런데 약해서인지 원형툽을 올려놓으니 출렁임이 생겨 실패했네요. ㅎㅎ
Hola excelentes proyectos que tipo de madera usaste en este proyecto saludos desde mexico
Oke
Wow... i will try
hey dekay! Nice proyect, can you send me the plains?
show... perfect
Thank you :)
The only thing miss here is a stop when you do many eaualy cuts
Great! What product (blue cup) you add throwing glue to the wood and what are you adding when drilling rails?? Thank you
Epoxy bond =)
Muy buena idea pero.. Que medida tiene cada pieza
Very useful! Great job!
Felicidades gran trabajo👍
Podrian poner las medidas?
Parabéns.. vc e muito criativo!
Muito obrigado
smart!
Thank you =)
Thank you I love your videos.. very helpful .. thank you for taking the time do record :-)
Thanks =)
All i can say is... i end up watching all your videos! Its great and i hope to make one of your designs. And i already subscribe to your channel.
Thanks =)
👌👌
FC From Thailand
Hi, Can you advise what glue you are using together with woodglue please?
Loctite 401 =)
I wanted to know if I could get the cut list for your Expandable Circular Saw. I will be glad to pay for it. Please let me know how I can get that from you. I do smaller projects and this would be a life saver for me. I look forward to hearing from you on this
Improvised, no detailed drawings left. I'm sorry I can't help you.
45°...???
Next time...
Nice vídeo. Congratulations.
Thanks =)
Muito bom, gostei.
Muito obrigado
Muy estupenda la Idea amigo, Pero una advertencia nada más: tenías wu haber puesto un sistema de aspiración para él polvo que produce al hacer los Cortes, no crees tú, ...??
Por lo demás ingeniosas ideas, ...!!!!
Saludos amigo, ...!?!?!?
Si, pienso igual
Lo haré pronto
너무 잘 보고 갑니다.. 저도 레일 구매 방법이 궁금 하네요~ ^^
스텐레스 절곡 집에서 쓰고 남는 자재라길래 얻어왔어요~ 기성품은 아닌데요, 만약 기성품 구매하시려면 '스텐레스 코너비드'라고 찾아보시면 다양한 형태의 제품이 있고 동네 철물점에서도 팔아요~
@@dekayscrafts 네 잘알겠습니다. 친절한 답변 감사합니다~ ^^