table saw sled/table saw upgrades/테이블 톱 확장 썰매 /망치소리
HTML-код
- Опубликовано: 24 окт 2020
- It is a table saw extension sled that can easily cut even long trees.
It is especially convenient and accurate when cutting multiple long trees.
"Woodworking tools are finished in the hands of a carpenter."
긴 나무도 쉽게 재단 할수 있는 테이블 톱 확장 썰매입니다.
여러개의 긴 나무를 재단할때 특히 편하고 정확합니다.
"목공 공구는 목수의 손에서 완성 된다."
인스타 그램: / wood.no1
홈 페이지 : hammersound.modoo.at/ - Хобби
재 업로드 영상입니다. 6:47초에 쏘스탑 사고영상/주의 사항등이 있습니다.
혹시 따라만드실 분은 같은 실수 없으시길바랍니다. 꼭 확인하시기 바랍니다.
This is a re-uploaded video. At 6:47 seconds, there is a saw-stop accident video/cautions.
If you are going to follow along, please do not make the same mistake. Please check.
ㅜㅜ 손가락이 아니라 알루미늄이 걸려도 터지네요.ㅡ.ㅡ; 카트리지 하나 날렸네요. 아까브라 ㅜㅜ
@@jangpannala 네..전기가 통하면 안되나 봐요^^ 젖은 나무도 안되고.. 장갑을 껴도 터지네요^^
@@망치소리HammerSound 네 취목이라 지금은 테이블쏘지만 ㅎㅎ 여건이 된다면 꼭 영입하고 싶은 쏘스탑 ㅎㅎ 영상 잘 보고 있습니다~
바이패스 모드를 모르시는건가여... ㅜㅜ
amzn.to/341H6Rn
Hi, I would like to introduce you to this excellent product, the product is very useful for carpenters, I recommend the saw six
Best table saw sled I’ve seen made on any channel yet.
Out of all the table saw sleds I've seen, this is without no doubt the best one.
Thank you
The. Most elegant design I have seen so far on RUclips.
대박 영상입니다!! 공유해 주셔서 감사합니다^^
Its a piece of art, thank you for leaving the hishap in the video. Well done great job.
AWESOME build. The parts where you setup the measuring tape was genius.
와우~ 망치소리님 대박 아이템 만드셨군요..
아이디어 정말 좋습니다.
저도 아이디어 훔쳐가서 만들어야 겠습니다.
즐거운 하루 되세요 ^^
ㅎㅎ 꽤 쓸만합니다.
즐거운 하루 되세요^^
That may be the coolest crosscut sled I've ever seen. Tamar (3x3 Customs) has a really cool one but you may have her beat. I dunno. I'd vote for you just because you had the guts to screw your fence in final position without the 5 cut method or even a single test cut. That's confidence!
Yes, it is. Thank you. Have a nice day.
Wonderful video and awesome build. Keep up the good work 🤙
That fence is genius, great build..
I really like your design for this sled. Your SawStop table saw has a key on the right side of the power switch that allows you to override the safety device for when you are cutting metal pieces, or when you are cutting wet lumber. The replacement brakes and blades can be very expensive, using this will save you a bunch of money.
A rather costly mistake not disabling the Sawstop mechanism prior to cutting the aluminum track. I made that same mistake when cutting a mirrored acrylic sheet. It only takes once in having to buy another safety mechanism and you won’t forget again. Your sled though is very well planned and an awesome build. I have flagged and saved your video so that I can reference when building my new sled. Thank You for sharing...👏🏽👍🏽
Thank you. Have a good day
Amazing job!!! Great video. Very inspiring.
Unique design. Nice work! Thanks for sharing! Cheers 🍻👍🏻😊
I saw that coming saw stop never fails, slead looks amazing, thanks for also sharing the mistake
영상 잘 보았습니다.
정말 좋은 팁을 배우고 갑니다.
감사합니다
믿고 보는 영상
Super travail, je cherchais moi-même un tel système pour ma scie sur table. Grand merci pour ce partage. Cordialement.
Great sled. I like it.
Watching your video is a real pleasure. Highest accuracy and quality of work (anyway excessing many times a common DIY enthusiast need).
Thank you
Большое спасибо дорогой друг!!! Замечательная работа! Посмотрел на одном дыхании
👍👍
Wowzers. That is a great sled. If only I had a little more free time...
Very nice! Nice design, nice workmanship! Hope to see more.
Thank you.
너무 유익해서 이건 뭐 유료시청해야해도 볼거같습니다!!
정말 창의적이고 실용적이고 와우 감탄만 하다보고갑니다👍
감사한 말씀입니다. 많이 알려주세요. 그것으로 충분합니다^^
Nice work! 👍 👌
6:45 sometimes..we learn lot from mistakes, great job with the table sled Sir
Well! Sawstop works! Got that test out of the way.
Best sled I've seen since my last winter in the Adirondacks. Well Done!! I will make one.
Do not run with those scissors.
Great design!!!
Great design! Thanks for sharing, it inspiring :)
Thank you
Really nice work sir please keep it up
Very Nice Job👍
Super idée 👍👍👍 et très bon travail bravo 👍👍
Merci
a melhor mesa para serra de bancada que eu j´vi no youtube...parabens!!!!
감사합니다
Отличная идея! Отличная работа!
Спасибо.
My brother I enjoy watching your videos so much that it makes no difference what tour making. I mean dude you have a gift, you are Blessed with so much talent and design, it really blows my mind how perfect the joints are and how everything fits together I am a sign artist and do a lot of hand lettering, I've been doing it for 35 years and I am decent, but when it comes to building things I get a F. I can design something that will work, in my head, but transporting that to my hands? I'm all thumbs. Great videos, I would thanking God everyday if I could do what you do. God bless Everyone
Thank you. You gave me strength.
Have a nice day
Спасибо! Отлично!
Wow very professional 👏
Good job, thanks for sharing
Well I thought I had seen great saw sleds before this one, It has to be the best ever.
I know right! Ill be trying to incorporate that adjustable fence into a miter saw station as well.
AWESOME WORK
I thiam hle Mai,good work ,and beautiful aidea
너무 감사합니다! 솜씨가 정말 좋으세요 !! 그리고 역시 쏘스탑 b ㅋㅋ
최고죠😊👍
Working on a saw in gloves is the same as putting out a fire with petrol :)
Thank you for sharing video brother,,, like from indonesia
Nice work sir
Excellent, perfectly done
Bet you wish you had a do over on that alum channel and the gloves with holes in them ? It was a great video and a damn nice accessory. //ji
This is an absolutely masterpiece
Wonderful 👏👏👏👏👏👏
Love the sled! Sorry about Saw-Stop accident.
Fantastic!
Просто Суппер!! Очень здорово!! Очень 👍👍👍👍👍
👍👍👍👍👍👍👍
Karyanya sangat sempurna
Ikut belajar gan🙏
It kooks like your reaction was the same as mine when I hit my Incra miter Gauge with my Sawstop. "!!! What just happened??? !!...."ohhhhh. #@&%$*" "well there goes $125"
Thanks for keeping it in there. Maybe it will keep others from making the same mistake.
Nice sled! You do a great job at showing the steps. Very efficient working.
Please put the Arabic translation. I am a good follower of you and benefited from you very much ... Thank you, always with success and success.
Muy buen trabajo
great idea
I guess you got a sawstop in case your gloves get caught while using the table saw? 🤦♂️
Класс👍такой каретки своими руками ,я еще не видел
About halfway through I was like "I wish I could get through a project like this without any problems...." oh shit.
Very clever 👍👍👍👍👍
좋은채널 이네요. 구독합니다
좋은 평가 감사합니다. 그리고 환영합니다.😉👍
Oh, that 6:47 bit was heart breaking.
A fraction of sec before it, I was thinking you must have engaged the safety over-ride.
Nope, ouch to the back pocket.
A good lesson to us all.
Good to have spares ready. Without spares on the shelf (i have both, just in case I have a lapse of brain moment), it is considerable wait time on a new blade and cartridge.
I was distracted for a while too.
@@망치소리HammerSound Even though this example wasn't preventing a danger, it sure is good to know mistakes won't involve lost limbs or fingers.
Genius 👍
Very nice 👌🏻👌🏻👌🏻🙏
Nice. I will try to cross purpose this to help with finger joints on a router table or shaper. Thanks.
Show us how you do this router jig if you can or share it with the creator of this channel and he could make one and document it to his RUclips Channel. Really appreciate it Carl.
Amazing.
Молодец, очень круто
Thats a very nice system.
But I'm into saving time, ill just use my radial arm saw. I may still make a crosscut sled. But honestly I dont need it.
S ya se que subió este video hace mucho tiempo, pero es increíble la manera en que detecta este dispositivo la energía que le transmite al riel de aluminio, pero me sorprendio más la manera en la que sobrellevo la situación jajaja
😊😊👍
와 쏘스탑에 쏘스탑성능 확실하네요 난 순간 뭔가 함 ㅋㅋㅋ
손가락 날라갈 염려는 없네요^^
멍때리고 보다가 순간 코믹이었습니다 ㅋㅋㅋ
부품값도 만만치 않을텐데 웃음을 주세서 감사해요
Yes, of course... and then some.
I did the same thing with my SawStop building face for my miter with aluminum extension.
Mantap...
Greetings,, do you have a plan for this? To follow up correctly 🌹 I loved this slide,, it it the best that I have seen so far 😍
I'm pretty sure I don't want a Saw-Stop.
Just have a lot of respect for the blade, as I have for decades.
impressive
Klasse 👍
Maravilloso. ,
Gracias
Коменти бомба!лиш проблємка-нерозумію.лайкос
Вибачте. Я не міг добре пояснити .. ^^
Mantap my friend
👌
очень грамотно!
Nice sled 👍🏻. I think you need new gloves 😅
Well thats an expensive oops....awesome sled though
Generous investment when making a jig^^
👍👍👍👍👍👍👍👍👍
👍👍👍👏👏👏
I like
There is a bypass for the Sawstop, that will allow you to cut conductive materials
I was thinking that too them realized it was probably easier to use the miter saw since he'd need extra clearance from the blade to avoid tripping the sensor in the future anyways.
Respect мастеру👍!!!!! Russia 14.11.20
Спасибо.
@@망치소리HammerSound 🤝
Ooops. Forgot to hit the bypass button. I bought my backup just in case i did the same thing. I saw sparks fly from some staples and a few screws. Not sure if the saw being in a non humidity controlled storage for about a year affected it like it did the bolts rusting them out.
아이고 아까워라 날 하나 버렸네ㅜㅜ
Круто, отбойник жалко =(
mantap
👍👍👍🖐
Nice job, but the day the glove gets caught in the saw blade, hello damage. For my part, out of the question that I work with my saw equipped with gloves. Afterwards, everyone is free to do what they want, of course.
Oops, sorry, I forgot, when writing my previous comment that you use the Saw Stop (what luck, in Belgium we do not know what to get) I love this brand, they make sublime machines. And I confirm, nice job. Very well thought out as a cutting sled.
Thanks for the advice^^
I screamed at the screen when you were about to cut the aluminum 😂 so sorry
😂
Thats ok he screamed when he had to buy replacement parts. Next time yell louder! He didn't hear you the first time.
@@bobbg9041 I’ve popped three over the years and it’s a painful $100 to stare directly into your own stupidity like that.
Good video, but words would help, even if it means subtitles!
I'll try my best
👍