What a nice way to make your own rollers, and a great tutorial! With this, everyone can make the rollers they watn to their walls and floors. Rocks, hexagonal panels for spaceship, roads...
I created dioramas, scenery, buildings, etc. for many years in 1/32, 1/18 and 1/6 scales. Used a ton of Sculpey, and that wasn't even my go-to. One thing I learned early on with Sculpey is that baking had more limitations than benefits. Once I tried this technique, I never baked it again. Boil it. You get way more control and it doesn't burn.
@@raecheldoes you're quite welcome. Speaking of tips, boiling allows pieces with varying thicknesses to harden without burn damage. Like a Pinochio head, for example. If baked, the long nose will burn before the head is done. Boiling eliminates that.
First, that’s a really clever solution to the copy/paste feeling most rollers give, like it’s always the same type of rocks Second, how are you able to keep that gorgeous nails working without gloves? I have to trim mines always
Thank you! I was feeling the exact same about rolled out walls being the same brick and stone patterns. And honestly, laziness haha. The more careful I am with my nails, the less frequently I have to cut them 😂
Brilliant approach. Also, don't be afraid of 3d printers. You can get surprisingly good results with an entry-level one for only $200-$300. If you'r able to accomplish all of this with just rocks in the neighborhood, I can only imagine what you might be able to do with a 3d printer and some software to create whatever you can dream up!
Wonderful tutorial on a budget roller system. I appreciate not having to spend hundreds of dollars per piece of equipment. Thank you so much for your videos!
Fantastic video! I am going to make one of these for sure. If you make another I recommend checking out bake and bond to put on your dowel before the clay, it'll bond the two together more effectively :)
I few days ago, I was commenting on a Summon Lesser Maker video, about styling a "The Floor is Lava" battle plan in Mordheim as "The Floor is *Rats".* Very "A Plague Tale" kind of narrative, where the ground is covered in rats, that both players need to avoid during the battle. And I thought "this is where a rat texture roller would be useful". A roller for creating a dense carpet of rodents. In practice, you'd use it to create rat swarms, that might in turn be used to represent larger masses of rats. I imagine sculpting some little rats, with wire tails, would make for good "stamps" for quickly creating the roller.
Ooh, that looks great! I'm also not ready to invest in a 3D-printer, while in general being too financially challenged for the high-end stuff. I had thought about maybe carving a pattern onto a wooden rolling-pin, but this looks easier and likely better.
Thank you! I tend to like making things with what I have on hand so this worked out great for me. I've since seen a couple of other texture roller videos on here by Tabletop WitchCRAFT and Real Terrain Hobbies, so you've got plenty of options!
OH WOW< This is Amazing, I have bought some of them SO CALLED Texture rollers off of Etsy, JUNK. And I had found out form 2 sellers.. they were the SAME SELLER! SCAMED! And they were both JUNK, NO details, and they would not refund my money. SO This is a GREAT IDEA! I am making one or 2 or 3 of these! A soon as MY REDO on my craft room is done THIS IS AWESOME! THANK YOU SO MUCH! BIG BIG HUGSS!!!
That sounds like a really frustrating experience :/ I've been hesitant to try purchasing them myself, so I figured I would try my hand at making them and it turned out! I'm happy to provide inspiration and I really hope it goes well 😊 Good luck with your craft room redo!
Yep he's a bigger brush for washing. Tip use a ticket brush for dry brushing. If you'd like to do 30 piles you might like to not spend 3 hours doing them then you can use a bigger brush. I believe it or not you can get circular Strokes for the bigger brush.
How thick is the silicone layer you're putting on walls for texture? I'm wondering if you could stick underneath some thin steel wire so you get to stick magnetic accesories on it?
I ended up designing my own texture rollers after being disappointed with the ones online. They primarily use textures meant for videogames and VFX which dont translate well to real life so make sure if you buy any files that they have some photos of it in use and not just renders. You can actually print most of these just fine in fdm which should be much cheaper, at a 1.5 mm layer height you can only make out the layer lines on very, very thin clay.
In these terrain crafting videos I keep hearing about mod podge, but as I live in a non-english-speaking country, I have no idea what to look for in crafting stores. What it actually is? What is it made out of? I live in Czechia, so I need to be able to translate it correctly. Is it like a paper glue?
As far as I understand, Mod Podge is a PVA-based medium with resin in it. The main thing is that it's a thicker adhesive that doesn't shrink and dries hard which is why it's so great for this craft. Depending on the application, you can still use tacky glue/PVA glue for gluing things together. As far as sealing goes, maybe a simple matte medium or a foam-safe spray sealant? Black magic craft I think has some videos on it. Hope that helps!
This is actually what I tried at first, but making the impressions after wrapping the clay expands and warps much beyond the circumference of the handle. I also found it was much more difficult to make clear and even impressions on the rounded surface than when the clay was laid flat. It could definitely be a skills-on-my-part issue though!
@@raecheldoes I wonder if a light bake would firm it a little, but still allow for good impressions? Anyway, I enjoy your channel and appreciate your sharing the processes 👍
@@spacecentergames No even a light baking will turn the polymer into plastic, only more soft and mushy, but it wont take impressions. An alternative could be epoxy putty, something like Miliput that is relatively cheap. You can wrap the handle let it set for about 20-30 min depending on the temperature of the room, and then go in with the impressions.
Whats the deal with the sprues on the cork board? I can't figure out the purpose but I know that it has to be genius. Great video! Loved the technique and the paint job :).
Thank you, thank you! I saw a few videos advocating texture palettes since the bumpier surface helps to encourage paint off of the brush for better dry-brushing overall. I thought what better use for old sprues that a diy texture palette! I'll probably continue to add to it over time.
@@raecheldoes We used to make texture boards when i was in the art school, texture drybrush boards are basically the same thing only less artsy fartsy and more utilitarian. We made them out of Wall filler painted over with acrylic. A thin hair comb can make some nice texture lines but you can really use anything to stamp interesting textured lines, from aluminum foil balls to stones and low grade sandpaper. A coat of black primer and you are good to go.
I really enjoy your videos. Really nicely made and a fun watch. I actually scroll through the comments to see if RP Archive has commented - the validation would give us all lovely hobby community vibes.
DAMN GIRL, CHILL OUT WITH THESE EDITS, oh my GAWD, this video is so much fun to watch STOP IT the rest of RUclips is gonna look dull after this god damn it. Great narration, seriously, awesome useful video
I did give this a try but the stamping stretches the clay so that it no longer hugs the handle nicely and the rocks are harder to press down on a non-flat surface.
@@raecheldoes amazing! In that case I'll have to share my next crafting video - it's pretty mass-ive; I'll try to (drop)ship it with appropriately effect-ive humor. (Over-obvious foreshadowing!)
LOL I genuinely laughed out loud at your comment. I actually struggled a lot creatively getting this video out so I decided to ease the mental load by omitting the puns this time. I am okay :P
So, instead of buying a texture roller for 20 €, I just need to buy a plunger, clay, gravel, modeling tools, a cling tin, sandwich paper, and a pasta machine and then ruin my oven with fumes, not to mention the additional hours trying to build that thing, right...? 🤣🤣🤣
...you were on a roll with all the puns, but you seem to be stone walled here. I cannot give this my stamp of approval.
I know I b-rock my streak! But I shale try again on the next video.
What a nice way to make your own rollers, and a great tutorial! With this, everyone can make the rollers they watn to their walls and floors. Rocks, hexagonal panels for spaceship, roads...
Yes! That's definitely the goal. I'm probably going to try something with more exact patterns next to see how that fairs.
I created dioramas, scenery, buildings, etc. for many years in 1/32, 1/18 and 1/6 scales. Used a ton of Sculpey, and that wasn't even my go-to. One thing I learned early on with Sculpey is that baking had more limitations than benefits.
Once I tried this technique, I never baked it again.
Boil it. You get way more control and it doesn't burn.
Oh that's an awesome tip! I will definitely give this a try!
@@raecheldoes you're quite welcome. Speaking of tips, boiling allows pieces with varying thicknesses to harden without burn damage.
Like a Pinochio head, for example. If baked, the long nose will burn before the head is done. Boiling eliminates that.
First, that’s a really clever solution to the copy/paste feeling most rollers give, like it’s always the same type of rocks
Second, how are you able to keep that gorgeous nails working without gloves? I have to trim mines always
Thank you! I was feeling the exact same about rolled out walls being the same brick and stone patterns.
And honestly, laziness haha. The more careful I am with my nails, the less frequently I have to cut them 😂
Thanks for the tip about caulking vs sealant!
Wow...this video has left a positive impression on me! 👍
Brilliant!! I've always been shocked and awed by the prices of texture rollers. Big thumbs up to the clear and quick step by step
Glad it was helpful!
Brilliant approach. Also, don't be afraid of 3d printers. You can get surprisingly good results with an entry-level one for only $200-$300. If you'r able to accomplish all of this with just rocks in the neighborhood, I can only imagine what you might be able to do with a 3d printer and some software to create whatever you can dream up!
Wonderful tutorial on a budget roller system. I appreciate not having to spend hundreds of dollars per piece of equipment. Thank you so much for your videos!
I'm glad you like it! I very much have the same mentality so I'm glad my videos can be helpful!
Fantastic video! I am going to make one of these for sure. If you make another I recommend checking out bake and bond to put on your dowel before the clay, it'll bond the two together more effectively :)
Woohoo! I'm happy to inspire :) And that's a great tip, thank you! I will definitely keep it in mind.
This is great! The detailed instructions are appreciated
I'm glad the level of detail is helpful 😊
I few days ago, I was commenting on a Summon Lesser Maker video, about styling a "The Floor is Lava" battle plan in Mordheim as "The Floor is *Rats".* Very "A Plague Tale" kind of narrative, where the ground is covered in rats, that both players need to avoid during the battle.
And I thought "this is where a rat texture roller would be useful". A roller for creating a dense carpet of rodents. In practice, you'd use it to create rat swarms, that might in turn be used to represent larger masses of rats.
I imagine sculpting some little rats, with wire tails, would make for good "stamps" for quickly creating the roller.
Now THAT would be taking this to the next level. I've definitely seen skull rollers but never rats. You may be on to something here...
I'm sorry but I can't snap a wood in parts like this, you should mention that the guide is for people with superpowers
I knew I forgot to include something! Sorry sorry that's completely on me and my ignorance of normal human genetics.
Great tutorial. Love that it is simple and easy on the budget.
Yay! Glad to hear it's helpful.
I like this. Its simple enough to let you make several of these fairly quickly. Thanks!!!
Yesss I'm glad!
Ooh, that looks great! I'm also not ready to invest in a 3D-printer, while in general being too financially challenged for the high-end stuff. I had thought about maybe carving a pattern onto a wooden rolling-pin, but this looks easier and likely better.
Thank you! I tend to like making things with what I have on hand so this worked out great for me. I've since seen a couple of other texture roller videos on here by Tabletop WitchCRAFT and Real Terrain Hobbies, so you've got plenty of options!
OH WOW< This is Amazing, I have bought some of them SO CALLED Texture rollers off of Etsy, JUNK. And I had found out form 2 sellers.. they were the SAME SELLER! SCAMED! And they were both JUNK, NO details, and they would not refund my money. SO This is a GREAT IDEA! I am making one or 2 or 3 of these! A soon as MY REDO on my craft room is done THIS IS AWESOME! THANK YOU SO MUCH! BIG BIG HUGSS!!!
That sounds like a really frustrating experience :/ I've been hesitant to try purchasing them myself, so I figured I would try my hand at making them and it turned out! I'm happy to provide inspiration and I really hope it goes well 😊 Good luck with your craft room redo!
Great alternative to 3d printing a roller. Nice work!
Thank you! That was the goal so I'm glad it comes across!
Great vid! I never thought of making a roller. You make it look super easy.
Thank you!
Yep he's a bigger brush for washing. Tip use a ticket brush for dry brushing. If you'd like to do 30 piles you might like to not spend 3 hours doing them then you can use a bigger brush. I believe it or not you can get circular Strokes for the bigger brush.
How thick is the silicone layer you're putting on walls for texture? I'm wondering if you could stick underneath some thin steel wire so you get to stick magnetic accesories on it?
Oooh the silicone is not very thick so that would be entirely doable. Either strips of nickel or the wire would work well.
Wow!!! This is so good! Thanks for sharing!
You're very welcome!
Your edits are just the best!
🥹 Thank you! I try I try haha
I ended up designing my own texture rollers after being disappointed with the ones online. They primarily use textures meant for videogames and VFX which dont translate well to real life so make sure if you buy any files that they have some photos of it in use and not just renders. You can actually print most of these just fine in fdm which should be much cheaper, at a 1.5 mm layer height you can only make out the layer lines on very, very thin clay.
Why didn't you make the rock impressions after putting the clay on the roller?
Another great video tutorial. Wonderful tips!
Thank you!!
OMG Im so glad i found out about your channel, you're hilarious and your work is lovley
Aww thank you so much!
Another great video as ususual! I'm going to have to give this a try.
Would love to know how it goes!
Fantastic video! I really appreciate you making this content for us, it's extremely enjoyable and useful, and it motivates me to do more crafting :]
Yess! One of my biggest hopes is to spark inspiration and encourage people to create! I'm glad I can do so in a way that you also find entertaining 😊
In these terrain crafting videos I keep hearing about mod podge, but as I live in a non-english-speaking country, I have no idea what to look for in crafting stores. What it actually is? What is it made out of? I live in Czechia, so I need to be able to translate it correctly. Is it like a paper glue?
As far as I understand, Mod Podge is a PVA-based medium with resin in it. The main thing is that it's a thicker adhesive that doesn't shrink and dries hard which is why it's so great for this craft. Depending on the application, you can still use tacky glue/PVA glue for gluing things together. As far as sealing goes, maybe a simple matte medium or a foam-safe spray sealant? Black magic craft I think has some videos on it. Hope that helps!
I'd wrap the handle first, then press the rocks 🪨
This is actually what I tried at first, but making the impressions after wrapping the clay expands and warps much beyond the circumference of the handle. I also found it was much more difficult to make clear and even impressions on the rounded surface than when the clay was laid flat. It could definitely be a skills-on-my-part issue though!
@@raecheldoes I wonder if a light bake would firm it a little, but still allow for good impressions?
Anyway, I enjoy your channel and appreciate your sharing the processes 👍
@@spacecentergames No even a light baking will turn the polymer into plastic, only more soft and mushy, but it wont take impressions. An alternative could be epoxy putty, something like Miliput that is relatively cheap. You can wrap the handle let it set for about 20-30 min depending on the temperature of the room, and then go in with the impressions.
@@joek600 Very cool alternative, thank you 😎
Very smart! I like it!
Thank you!
I think many are missing a big take away from this video, which is a new term for the crafter lexicon - "plopping ground".
😂 One of my new favourite comments
I'm honored, will take that as a "win", and just take off the rest of the day. 😛@@raecheldoes
Whats the deal with the sprues on the cork board? I can't figure out the purpose but I know that it has to be genius.
Great video! Loved the technique and the paint job :).
Thank you, thank you! I saw a few videos advocating texture palettes since the bumpier surface helps to encourage paint off of the brush for better dry-brushing overall. I thought what better use for old sprues that a diy texture palette! I'll probably continue to add to it over time.
@@raecheldoes That makes a ton of sense! I was just looking at my old sprues yesterday, knowing I saved them for something. Kismet!
@@raecheldoes We used to make texture boards when i was in the art school, texture drybrush boards are basically the same thing only less artsy fartsy and more utilitarian. We made them out of Wall filler painted over with acrylic. A thin hair comb can make some nice texture lines but you can really use anything to stamp interesting textured lines, from aluminum foil balls to stones and low grade sandpaper. A coat of black primer and you are good to go.
I really enjoy your videos. Really nicely made and a fun watch. I actually scroll through the comments to see if RP Archive has commented - the validation would give us all lovely hobby community vibes.
He mentioned me in his sewers video and I about lost my mind.
You say 'silicone' but I think you mean 'acrylic caulking' because silicone does not take paint.
You are correct! I say acrylic sealant in my other video but I say silicone on the video. I guess it slipped my mind so thank you for the correction!
WoW very clever idea 💡 Thanks a lot ❤❤❤❤
You're most welcome!
DAMN GIRL, CHILL OUT WITH THESE EDITS, oh my GAWD, this video is so much fun to watch STOP IT the rest of RUclips is gonna look dull after this god damn it. Great narration, seriously, awesome useful video
I was beaming from your comment haha. IT WILL FUEL ALL THE EDITS.
You had me at Pinky and the Brain quotes :), amazing vids ❤
Good stuff, Rae.
Thank you very much!
Why wouldn’t you roll the clay onto the round wood piece and then stamp the rocks onto the already premade roller?
I did give this a try but the stamping stretches the clay so that it no longer hugs the handle nicely and the rocks are harder to press down on a non-flat surface.
This is such a useful video!
Yaaahhh! I'm glad you think so 😊
@@raecheldoes I'll make sure to tag you once I get a roll going! Thanks for this.
Cool
I swear, I heard those intro sound effects before, in Stardew Valley :D
Literally every time I hear successive popping noises, I think the same thing 😂
But Rae'chel... where... where are the puns?? I feel like I've been robbed of your rock(roller)-solid wordplay!
🙈 Shhh oh no don't look at me LOL. Word has it they're slated to return, of quartz!
@@raecheldoes amazing! In that case I'll have to share my next crafting video - it's pretty mass-ive; I'll try to (drop)ship it with appropriately effect-ive humor. (Over-obvious foreshadowing!)
WHAT (bam) AN (bam) INTRO (bam) !
😂
Wait- was 2mm too thin??
Oh I can see the confusion! 2mm was for my successful 2nd attempt!
shout out Real Terrain Hobbies!
👌👌👌
Pinky and the brain reference makes the video with it
RACHEL dont commit to the 3d printer!!!! There is not many scrap buileders left
AAHHH I'm trying to resist!! But you can do so many cool and quick things with one 🥺
I didn't notice a single pun there... are you OK?
LOL I genuinely laughed out loud at your comment. I actually struggled a lot creatively getting this video out so I decided to ease the mental load by omitting the puns this time. I am okay :P
@@raecheldoes Ah glad to hear it ☺ still an awesome video even sans puns!
So, instead of buying a texture roller for 20 €, I just need to buy a plunger, clay, gravel, modeling tools, a cling tin, sandwich paper, and a pasta machine and then ruin my oven with fumes, not to mention the additional hours trying to build that thing, right...? 🤣🤣🤣
Yes.
Wait, did I hear you right? You just ditched the silicon polluted water into your garden? OK ...
TOO MUCH WORK