Ist schon eine echt Klasse Idee!! Falsche Scheibe!!! Und gleich nach dem Schleifen das Sägeblatt wegschmeißen. Hab heute mit der "ceramic" Scheibe geschärft . Die Scheibe war vorher stumpf, jetzt sind die Blättchen an den Schneidkanten ausgeschlagen!! Immer eine Scheibe für HM benutzen!!
Для полноценной правильной заточки стол на который крепится затачиваемая ФРЕЗА должен иметь заданный угол. буквально наклонен в сторону. и фиксатор фрезы. В остальном всё хорошо. Респект.
Making tools that work is satisfying. The only thing this saw sharpener can't do is sharpen angled teeth but that is not a problem if your blade has just straight teeth.
No pretendo ser negativo, pero te recuerdo que los dientes llevan una ligera inclinación a un lado y a otro correlativamente por diente. Con este sistema, por supuesto que se notará el afilado, pero el que te hace un profesional, lo hace con una máquina automática que tiene en cuenta este detalle, inclinándose diente a diente para dicha inclinación. Saludos cordiales.
this is probably the best video i have seen by far for this carborundum sharpening. the jig is straightforward without the total bs. of " hey look i am going to make the most complicated jig with lots of sprcialized tools - i mean you have a workshop and nothing to do , right?" this is very very straightforward with a minimum of fuss and ... well you read the first part of my comment ... mounting the angle-grinder is just specific to what works for yours, shape the block a little. i suppose the disc circumference will be almost touching the melanine. he uses the cheapest cut-off ceramic wheel. this will work if you sharpen correctly. it is a very light touch to contact the teeth. there should be no distortion of the wheel. this is actually correct for sharpening. this system will work if you have minimum tools and skills. hell, it is probably possible to do all this with just an angle grinder, a wood disk and hammer and nails. i have had to work with hammer and nails and glue recently. my experience is buy as many types and sizes of nails as you can. the right nail is very important in this type of technology. batteries fail, corded drills can be a pain, but hammer and nails are very powerfull. recently i had to nail in an unstable situation. i started the nail and used an old wood clamp to push it home. i also used cheap standard white glue. if the joint is protected from water, this way of joining wood is miraculously powerful.
A great little project, have it on my to-do list👏👏 I think I will cut a V shape into the block of wood that holds the angle grinder as I'm sure it will make the grinder more rigid. Will also clamp the base plate. Have subbed on the strength of this one vid. Keep me coming👏
esta bien la idea pero los dientes tienen angulos opuestos y se los dejaste rectos...good idea but the blade's teeth are at 2 angles and you sharpened them flat.
Hi, The teeth of every knife are not angled. Some are straight. If you want an angle, you can angle the angle grinder. Hola, Los dientes de cada cuchillo no están en ángulo. Algunos son heterosexuales. Si desea un ángulo, puede inclinar la amoladora angular.
Зачем такие проблемы? На пилу изготовить и установить жёсткий опоры, для установки на вёрстка диском вверх, чтобы работать с мелкими детали. При необходимости ставим алмазную чашка и точим пилу, при этом можно менять угол заточка зубчика
? why just not install the ceramic disk, onto your bench grinder ? then, make the skill saw blade jig, for it. ? each must design, it, for their own particular situation/dimensions, etc. thanks for the idea. i usually place large disk, in vice, and touch up teeth, with angle grinder...thankyou..
Всё ништяк! Однако плоскость режущей наплавки нехило бы выставить хотя бы на 15 град. относит. плоскости оси вращения диска, что у левого, что у правого зуба, да и от радиуса соблюсти бы уголок... Чтоб пилёжка была как песня !
Merhaba öncelikle değerli paylaşımlarınız için teşekkür ederiz bir sorum olacaktı bende de sizdeki einhell in şarjlı daire testeresinden var ve son zamanlarda kesimlerde sürekli sıkışma yapıp duruyor sizde aynı problemi yaşadınızmi ve eğer yaşadıysanız bıçağı biledikten sonra kesimlerde fark oldumu
Merhaba, evet ben de yaşadım. Bıçağı biledikten sonra bir iyileşme oldu, ancak bıçak pek kaliteli değil. Bu sebeple uzun ömürlü de değil. Neyseki ucuz bir bıçak, ancak bulması biraz zor. Ben Karaköyde bulunca 2 tane aldım. Üstelik diğer bıçakların dörttebir fiyatına. En fazla 3 defa bilenebileceğini düşünüyorum.
![making a SHARPENING JIG & sharpening CIRCULAR SAW BLADES with table saw [woodworking]](/img/1.gif)
Great !! this is what i need , basic and effective , thanks
Good idea. The slide table is simple but effective!
Ist schon eine echt Klasse Idee!! Falsche Scheibe!!! Und gleich nach dem Schleifen das Sägeblatt wegschmeißen. Hab heute mit der "ceramic" Scheibe geschärft . Die Scheibe war vorher stumpf, jetzt sind die Blättchen an den Schneidkanten ausgeschlagen!! Immer eine Scheibe für HM benutzen!!
Very useful and practical simplicity Very nice. great concept . Yes i like this method very much . Thank you .
Going to try it. Thank you sir!!!
I'm glad you liked it. Thank you for your nice comment.
Good job 👍
Excelente..gracias.. saludos desde ecuador...like.
Gracias por tu hermoso comentario.
best and easyest idea i like it very much thank you
Ausgezeichnet. Mit einfachen Mitteln klasse gelöst. Baue ich mir auch!!!
Nice jobs
Thanks for your efforts, ! great Jig ! I will make one too. You are a smart guy.
Nice👌👍
Many thanks will have a go at making that jig .
Gayet başarılı bir video olmuş aradığım ama zor bulduğum bit video,teşekkürler
Beğendiğinize sevindim izleyip güzel bir yorum yaptığınız için teşekkür ederim.
Que video te la rifastes soy tu fans 👏👏👏👏
Побывал таким диском точить. Крошит победитовый зуб пилы. А идея хорошая
Eu estava procurando por isso faz muito tempo.
Muito grato por compartilhar.
Estou feliz que funcionou.
Muito bom sua ídeia parabéns
Fico feliz que tenha gostado, obrigado pelo seu comentário.
Valeu parceiro beleza gratidão irmão Deus abençoe vocês gratidão irmão MG moeda brasil ficou ótimo
Спасибо за видео надо себе так сделать
Exelente idea, gracias por compartir tu conocimiento
Me alegra que te guste. Gracias por tu comentario.
You very good
Thank you, you are better.
super cool ! merci !
Good morning! This cutting disc is for cutting ceramic. Can it be used to point the saw blade too? Thank you ...
Very simple but very very useful😆✋🙌
Thank you.
Genial einfach, das baue ich auf jedenfall nach
Parabens🙏
elinize saglik. einhell in daire testere dislerinde aci var, bileme isleminden sonra eskisi kadar verim alabildiniz mi?
Muy buenas ideas..
Me alegra que te guste. Gracias.
Very nice!! Very smart!!
muy practico y sencillo sin tanta tecnica . bien maestro.
It is a simple mechanism. Like it.
Muito obrigado pela dica, eu já afiei com o disco de corte, mas gasta muito.
Для полноценной правильной заточки стол на который крепится затачиваемая ФРЕЗА должен иметь заданный угол. буквально наклонен в сторону. и фиксатор фрезы. В остальном всё хорошо. Респект.
Thanks for that gem👍👍
I'm only guessing but do the saw blades cut more in a slicing action?
very good idea thank you
Thanks and welcome
valla cok guzel sunum ve öğreti birde yabanci zannettim meger yerli imis daha cok sevindim kamera hızlandırma kurgu editleme super
Merhaba Hasan sen bir de diğer videolarımı görsen 😊 Güzel yorumun için teşekkür ederim. Kal sağlıcakla....
tres bonne idee ca depanne un bricoleur
Content que tu aimes ça. Merci pour votre commentaire.
That is very ood. Bagus sekali dan muda wow.
perfect job.
I loved it.
thans a lot.
🌹🌹🌹👍
Parabéns ficou 10 belo trabalho
Simple but effective thank you for the idea.
Thank you very much, I am very happy that you like it.
All very good! Thank u 4 sharing!
Thank you.
Making tools that work is satisfying. The only thing this saw sharpener can't do is sharpen angled teeth but that is not a problem if your blade has just straight teeth.
You are right... Thank you.
You can angle the grinder. ;-)
I'm Ada Zhou, manufacturing company for saw blades.
No pretendo ser negativo, pero te recuerdo que los dientes llevan una ligera inclinación a un lado y a otro correlativamente por diente. Con este sistema, por supuesto que se notará el afilado, pero el que te hace un profesional, lo hace con una máquina automática que tiene en cuenta este detalle, inclinándose diente a diente para dicha inclinación.
Saludos cordiales.
Lo tiene pero en su parte superior, de la forma que el lo afila es en un solo sentido
@@oliverbarritajuarez2104 Así es.
this is probably the best video i have seen by far for this carborundum sharpening. the jig is straightforward without the total bs. of " hey look i am going to make the most complicated jig with lots of sprcialized tools - i mean you have a workshop and nothing to do , right?" this is very very straightforward with a minimum of fuss and ... well you read the first part of my comment ... mounting the angle-grinder is just specific to what works for yours, shape the block a little. i suppose the disc circumference will be almost touching the melanine. he uses the cheapest cut-off ceramic wheel. this will work if you sharpen correctly. it is a very light touch to contact the teeth. there should be no distortion of the wheel. this is actually correct for sharpening. this system will work if you have minimum tools and skills. hell, it is probably possible to do all this with just an angle grinder, a wood disk and hammer and nails. i have had to work with hammer and nails and glue recently. my experience is buy as many types and sizes of nails as you can. the right nail is very important in this type of technology. batteries fail, corded drills can be a pain, but hammer and nails are very powerfull. recently i had to nail in an unstable situation. i started the nail and used an old wood clamp to push it home. i also used cheap standard white glue. if the joint is protected from water, this way of joining wood is miraculously powerful.
👍🏻👍🏻
RCTURKA SALUDOS TUS VIDEOS SON GENIALES Y MUY UTILES
Идея хорошая, спасибо
Show de bola muito top eu jogava as serras ruim fora agora eu não jogo mais. Valeu vou fazer um para mim.
Gracias por el vídeo , donde conseguir el disco afilador
Ya no uso ese disco. Prefiero los discos de resina. Busque discos de resina.
será se dar certo ? porq ha uma diferença em cada dente do disco de serra . Se afiar todos os dentes em uma so posiçao nao ficará bom.
Thanks bro
Qual e esse modelo de disco da Boch que você está usando na Esmerilhadeira pra afiar ?
Por gentileza
nice work
would you please send description or details or link for the used grinder disc I want to buy it but i dont know what it is specs
Q tipo de disco utilizas para afiliar
Show de bola companheiro!
Gracias facil pero bueno
Como estas que disco es el que usas para afilar . el que pusistes en la moladora.mis discos son con punta de tucteno sirve .
Te felicito. Genial
Ingénieux le système vaut mieux n'e pas prendre de risque.
Simple and accurate 👌
Merci je vais faire la même chose. Comment ais-je pu oublier mon côté astucieux et créateur. Merci de m’avoir redresser dans le bon sense
Merci d'avoir regardé ma vidéo et d'avoir laissé un gentil commentaire. Sincères amitiés.
Cet...formidable...jaiapris..beaucoup..de..intressans
لا بأس ولكن سرعه الصاروخ قويه جدا
Sehr Gut gemacht, Gruß Manfred
Welche Scheibe hast du für den Winkelschleifer?
VG
Гениально, точить с помощью ушм, браво
Compa me podrias dar el nombre del disco que estas usando para afilar. Saludos desde Ecuador
Bosch seramic disk
Gracias compita.
И как же я сам до этого не додумался👍😁
Muito bem gostei 👍
Estou feliz por ter gostado. Obrigado pelo seu comentário. Meus outros vídeos também são muito legais, dê uma olhada neles também.
What kind of disk is this?
Идея понятна и проста... Спасибо. Но вот Зубья ещё некоторые под наклоном ....
А какой круг для ушм использовал
Проще некуда. Спасибо.
A great little project, have it on my to-do list👏👏
I think I will cut a V shape into the block of wood that holds the angle grinder as I'm sure it will make the grinder more rigid.
Will also clamp the base plate.
Have subbed on the strength of this one vid.
Keep me coming👏
Good idea 👍👍
Como se llama ese disco
esta bien la idea pero los dientes tienen angulos opuestos y se los dejaste rectos...good idea but the blade's teeth are at 2 angles and you sharpened them flat.
Hi, The teeth of every knife are not angled. Some are straight. If you want an angle, you can angle the angle grinder.
Hola, Los dientes de cada cuchillo no están en ángulo. Algunos son heterosexuales. Si desea un ángulo, puede inclinar la amoladora angular.
Que disco é esse amigo?
Não deu pra w
Me gustó mucho tu vídeo, solo hubiera puesto un sargento para asegurar que no se mueve el afilador.
Pero te doy un 10.
Ah te doy un like y me suscribo.
I will like to know what is the name of the sharpening diamond discs
They are diamond blades with continuous rim diamond blade.
No me parece que esas abrazaderas de plástico puedan sujetar con firmeza la amoladora
Seramik testerenin yere olan açısını 90° olduğunun teyitini yapsaydınız daha hassas bir bileme ortaya çıkardı.
perfect
Hola que tipo de disco es para afilar como se conpra
Bileme taşının ismi nedir
you do know that the left and right cutting tips do have a small off set angle not all square
Thank you for your comment. You are right. Would you like me to make a new tool for angle sharpening?
Зачем такие проблемы? На пилу изготовить и установить жёсткий опоры, для установки на вёрстка диском вверх, чтобы работать с мелкими детали. При необходимости ставим алмазную чашка и точим пилу, при этом можно менять угол заточка зубчика
? why just not install the ceramic disk, onto your bench grinder ? then, make the skill saw blade jig, for it. ? each must design, it, for their own particular situation/dimensions, etc. thanks for the idea. i usually place large disk, in vice, and touch up teeth, with angle grinder...thankyou..
Всё ништяк!
Однако плоскость режущей наплавки нехило бы выставить хотя бы на 15 град. относит. плоскости оси вращения диска, что у левого, что у правого зуба, да и от радиуса соблюсти бы уголок...
Чтоб пилёжка была как песня !
Tengo mucha curiosidad de como quedo el resultado de esto.. puesto que ese disco diamantado es de corte,, no es para afilar :/
Порн
Из
Порно
Se utiliza para afilar ya que es más duro que el carburo, hasta el de corte para metal se puede usar.
Merhaba. Bileme diski ne? Seramik kesme diskimi?
Merhaba, Evet, uzun kullanım sonrası küçük bir tavsiye: eğer disk bıçağın uçlarına zarar veriyor ise ters takınca bu etkisi kayboluyor.
you forgot stoppers
Merhaba bilemek için kullandığınız seramik disc deforme olmuymu veya kaç defa kullanabiliyor sunuz teşekkür ederim
Merhaba, fazla kullanılmadığı için uzun ömürlü oluyor.
Merhaba öncelikle değerli paylaşımlarınız için teşekkür ederiz bir sorum olacaktı bende de sizdeki einhell in şarjlı daire testeresinden var ve son zamanlarda kesimlerde sürekli sıkışma yapıp duruyor sizde aynı problemi yaşadınızmi ve eğer yaşadıysanız bıçağı biledikten sonra kesimlerde fark oldumu
Merhaba, evet ben de yaşadım. Bıçağı biledikten sonra bir iyileşme oldu, ancak bıçak pek kaliteli değil. Bu sebeple uzun ömürlü de değil. Neyseki ucuz bir bıçak, ancak bulması biraz zor. Ben Karaköyde bulunca 2 tane aldım. Üstelik diğer bıçakların dörttebir fiyatına. En fazla 3 defa bilenebileceğini düşünüyorum.
buena tarde desde Venezuela el disco que utiliza para afilar es de diamante o aleacion especial gracias
Yo tambien quiero saver como se llama ese disco
Hola que disco usaste para axilas las widias. Es un diamantado continuo para cortar pared de concreto? Gracias
Usé un disco de cerámica.
@@GreenSaw ok. Muchas gracias
Very good, but a few measurements would help!
Что за сверлильный станок у вас ?
Is there an angle on the grinder
No, but you can.