Brilliant. Likely the most elegant and simple design I have seen. Caters for different tooth angles and diameter blades. Time for me to make one like it. Thank you for sharing!
Really nice simple jig for shaping saw blades just shows with a bit of knowledge and design we can save a lot of money on sending blades for reshaping take care 😀👍
very well made and works perfectly. very impressive, You seemed to be doing every third or fourth tooth I think, can you explain that please and how you get the others.
I’ve been looking for a simple jig and this is the best I’ve seen. Would you be kind enough to share the dimensions of the various pieces? Thanks for sharing
@@j-woodworking9573 I was able to make it and it works extremely well, thanks again for sharing your design, much appreciated. I'm a 3 hour drive to the nearest sharpener and your jig has saved me a lot of time and money!
woojunggigi.toolpark.kr/product/product-detail.do?goods_code=1222778&NaPm=ct%3Dkkjot73s%7Cci%3D3f4ef5faf8a2935d3e80601218de17d6f6a316c7%7Ctr%3Dslsl%7Csn%3D873154%7Chk%3D7c16f78d7f85d28085521be2963b5dbaad316097 Thanks for watching sir.
fromchina.co.kr/shop/item/1146714/cate/111/page/18//?dm=1&l=20&o=2&d=desc&q=%EC%A0%88%EB%8B%A8&ps=0&pe=0 You can see more above. Thanks for watching sir.
How did you come up with the design? It's brilliant, but it looks like it might be intimidating to use. Is it just me or does your riving knife appear to be loose or bent, could be time to tune that up as well.
Saw blades have two or three directional teeth. Left angled, neutral and right. But saw blades on the table saw can be left angled only. When I grind right angled teeth I change the position front to back side. Looking from back the grind disk is right angled. That's why I change the position to back. Thanks for watching sir.
I wish I would have found a saw like this years ago! It does everything that we have asked of it so far. Works great ruclips.net/user/postUgkxjpBI8OOeUXib_iT7UomCrQ-uauwZJ62c on cutting composite siding and plywood sheathing. I probably would not try to use it all day cutting 2X boards, but it's just the right size to throw in a job bag vs. your conventional heavy circular saw. Operating instructions very clear. Came package well. I would definitely recommend you buy this for a friend!
Ton système est nul tu ne prend pas la même valeur d’affutage sur chaque dent ,ce qui vas influencer l’affutage de l’extérieur de la lame ,he oui il faut faire la périphérie maintenant ton système n’est pas a recommander en plus les grains diamant de ta meule vont usiner par frottement les glissières de ta machine!!!!!
![3 simple hacks for restoration of old chair [woodworking]](http://i.ytimg.com/vi/DEn-NUzXPOM/mqdefault.jpg)
This is really a great design. Adjustable yet so simple and straight forward to build.
Thanks for watching sir.
Excelente su trabajo y decempeño....! Saludos desde Medellín Colombia.
Thanks for watching sir.
Wow. Great idea and perfect solution.
Thanks for watching sir.
Great, thank you so much for sharing it with us. Congratulations!!!
Great blade sharpening jig J! Nicely done as usual..... 👍👍😉😉
Thanks for watching sir.
Brilliant. Likely the most elegant and simple design I have seen. Caters for different tooth angles and diameter blades. Time for me to make one like it. Thank you for sharing!
Thanks for watching sir.
Very very clever man. An inspiration
Thanks for watching sir.
Nice tool. I've seen one of these somewhere before but never brave enough to try it myself...lol. Great video J...better all the time.
Now I don't have to go out to a sharpening shop. It works properly. Thanks friend.
Great idea. Thanks for sharing 👍
Thanks for watching sir.
Really nice simple jig for shaping saw blades just shows with a bit of knowledge and design we can save a lot of money on sending blades for reshaping take care 😀👍
Thanks for watching sir.
Отличная самоделка 👍
Thanks for watching sir.
Very practical and simple jig. Well done
Thanks for watching sir.
Working method! The main result is that you can sharpen the saw without a special machine. Good luck to you!
Thanks for watching sir.
Very clever, a very well designed sharpening tool.
Thanks for watching sir.
Thank you for taking the time to share with all of us sir. All the best
thank you for this video..nice jig.
Thanks for watching sir.
Nice and smart.
Good job J
Thanks for watching sir.
I love to see the way you do all your square measurements, straight from the table saw. Powermatic!!
Thanks for watching sir.
금손이네요!! 다이아몬드휠과 초경이 다으면 열이발생하여서 초경에 수명이 나빠집니다 여건이된다면습식으로 하는게 좋을듯합니다!
잘보고갑니다 감사합니다^^
도움되는 정보 감사합니다.
Good job. We shared this video on our homemade tools forum this week :)
Thanks for watching sir.
You've shown me how useful rail channels are in assembly. Going to start using tablesaw top as workspace.
I love to use table top for many kinds of working. Thanks for watching sir.
чудова робота!😅
Very good idea! I've seen many sharpening jigs, but this, besides its simplicity, has almost infinite adjustment possibilities. Loved it :-)
Thanks for watching sir.
와우! 톱날 각도가 세가지인 줄 처음 알았습니다. 여태 쓰면서도 몰랐네요. 고맙습니다~^^
도움이 되었다니 기쁩니다.
감사합니다.
TY for this. I'm now subscribed
Thanks for your subscription sir.
What I do know is that you're a genius
Thanks for watching sir.
Super genial ...super like 👍🏻👍🏻👍🏻
Thanks for watching sir.
Good👍👍👍👍👍
고마워
Like my friend 👍👍👍
Thanks for watching sir.
Пожалуй. это лучшая приблуда на эту тему. Используются функции распиловочного станка.
Идеята е добра,само че тази машина е брутално шумна и е около 2 киловата.
Very impressive ! Nice Jig, I am making one...I keep throwing $50 blades away.
Thanks for watching sir.
hmm, you've been thinking about this, well done
Thanks for watching sir.
Super!👍👍👍🇹🇷
Thanks for watching sir.
Great Job! What is the angle of the jig compare to the top of the table saw?
very well made and works perfectly. very impressive, You seemed to be doing every third or fourth tooth I think, can you explain that please and how you get the others.
Алмазная пыль плохо повлияет на пилу, а так мысль неплохая.
이게 정답인거 같습니다.. 많이 배웁니다.
따라 만들수 있게 도면이 있었으면 합니다.
Good Idea! Any idea how to set it up to regrind a blade to do dovetails on the saw where all the teeth are flat ground to 7.5 degrees.
Sorry I've not thought about it.
Thanks for watching sir.
muy buen aporte, gracias
Will double sided tape hold the spindle secre enough?
Good job...
아이디어 짱이십니다^^
감사합니다
I just started doing woodworking but I think I can make that if I knew where you got the washer and other parts .
I bought it at a nearby local shop here.
Sorry.
Min 1:41
Wrong and dangerous way to pick up wood from a table saw😓
Sorry about that. I'll be careful.
Thanks for watching sir.
My friend, please 🙏 stop reaching over the blade while it is still moving. Thanks for sharing your awesome ideas
멋지네요😍
감사합니다
I’ve been looking for a simple jig and this is the best I’ve seen. Would you be kind enough to share the dimensions of the various pieces? Thanks for sharing
Sorry I don't have plans.
Thanks for watching sir.
@@j-woodworking9573 I was able to make it and it works extremely well, thanks again for sharing your design, much appreciated. I'm a 3 hour drive to the nearest sharpener and your jig has saved me a lot of time and money!
Brilliant.. But I missed the intro background music 😁
i just thought the same.
Some don't like the music. So I made the intro music dismissed and the ending turned down.
Thanks for watching sir.
@@j-woodworking9573 The intro and outro music is something I always look forward to, it never gets old for some reason. 😄
Some like and others don't like. What can I do???
@@j-woodworking9573 no music is better then shit music😉
와우 대단하십니다. 전 이제부터 돈좀 모아서 테이블쏘 좋은걸로 하나 장만해야 될듯합니다. 쫌 저렴한 보급형으로 구입했는데 작업하는데 많은 제약이 따르네요 선생님이 사용하시는 테이블쏘 모델명좀 가르쳐 주세요. 참고하겠습니다.
파워매틱입니다.
450만원 정도 주고 샀는데 쓰임새가 좋아 만족합니다.
감사합니다.
@@j-woodworking9573 감사합니다
열심히 모아야 되겠네요
What angle is the blade holding board set at? Maybe 30 degrees? Thanks again for sharing such great information.
25 degrees.
Thanks for watching sir.
Amazing
Thanks for watching sir.
Please provide a link to the source of the sharpening disc. Thank you
woojunggigi.toolpark.kr/product/product-detail.do?goods_code=1222778&NaPm=ct%3Dkkjot73s%7Cci%3D3f4ef5faf8a2935d3e80601218de17d6f6a316c7%7Ctr%3Dslsl%7Csn%3D873154%7Chk%3D7c16f78d7f85d28085521be2963b5dbaad316097
Thanks for watching sir.
So at how many degrees is that blade holding disc ? ?
Show do milhão !
Thanks for watching sir.
Have you got the link for this grinding wheel thanks'
fromchina.co.kr/shop/item/1146714/cate/111/page/18//?dm=1&l=20&o=2&d=desc&q=%EC%A0%88%EB%8B%A8&ps=0&pe=0
You can see more above. Thanks for watching sir.
Could you please make the plans available? I’d like to obtain plans for this sharping project.
🚣♀️🏴 I hope you count your push sticks and fingers regularly. Best wishes Rick
Thanks for your kind advice sir.
영상 잘 보고 있습니다. 실제로 만들어서 사용을 해봤습니다. 영상 중간에 연마석을 반대로 바꾸어 끼신것 같습니다. 그리고 제 테이블쏘가 좀 작아서 톱날 치수에 맞추어 두가지를 만들어야 했습니다. 암튼 감사합니다.
맞습니다. 반대로 끼웠습니다. 죄송. 그러나 연마할 때는 바르게 장착되었습니다.
감사합니다.
Do you have a list of everything you need to make this plus size and dimensions
Sorry I don't have plans.
Thanks for watching sir.
Профессионально
How did the blade cut after sharpening? We you happy with the cut?
Thanks for watching sir.
연마시기는 어떻게 정하시나요?
저같은 경우에는 mdf를 많이 사용해서 치핑이 나기 시작하면 그때 연마를 보내는데, 비용이 상당해서 , 저런 지그를 하나 만들까 생각중이거든요. 근데 너무 자주 연마하는것도 안좋을거같아서... 선생님의 고견을 듣고 싶습니다.
특별한 원칙은 없습니다. 재단하는데 평소보다 뻑뻑한 느낌이 들면 연마를 합니다. 연마 절삭량은 최소한으로 해도 절삭력이 많이 향상됩니다.
감사합니다
Muito bom!👍
Show 👋👋👋
Thanks for watching sir.
Where did you get that diamond grinding wheel?
itempage3.auction.co.kr/DetailView.aspx?ItemNo=B236251722&frm3=V2
I bought it over there.
Thanks for watching sir.
No English on that site.
Sorry about that. I got it there.
Where do you get the diamond sharpening blade and how much?
I bought it at a local shop here. And it was some 60 dollars.
Thanks for watching sir.
How did you come up with the design? It's brilliant, but it looks like it might be intimidating to use. Is it just me or does your riving knife appear to be loose or bent, could be time to tune that up as well.
The riving knife is a little bent. It needs to be repaired. Thanks for watching sir.
Hello.Please tell me why you changed the position when sharpening the disk. from the front to the back.With respect.
Saw blades have two or three directional teeth. Left angled, neutral and right. But saw blades on the table saw can be left angled only. When I grind right angled teeth I change the position front to back side. Looking from back the grind disk is right angled. That's why I change the position to back.
Thanks for watching sir.
Understood.Thank you.Please tell me where you can buy such a grinding wheel.With respect.from Russia.
I bought it at local shop in Korea.
Thank you
테이블쏘에 넣은 연마석은 어떤 종류인가요?
다이아몬드 그라인딩 휠, 7만원 전후입니다
감사합니다
Hello.Please tell me if you have a powermatic 1000 or 2000.With respect
Powermatic 2000
Thanks again sir.
Como afilo un disco para concreto segmentado de 9 pulgadas... Se puede?? Gracias
How can I buy the diamond sharpening stone?
I bought it at a local store in Korea.
Thanks for watching sir.
does anybody know of a way to grind a blade from alternate top bevel to a flat top grind?
Nice
Thanks for watching sir.
Great
Thanks for watching sir.
Magkano Po yang panghasa ng carbide
👍🎈
Thanks for watching sir.
Genial!
Thanks for watching sir.
3:05
that red wheel is not for carbide . you should have a green wheel and it will sharpen way better
like 3119
I wish I would have found a saw like this years ago! It does everything that we have asked of it so far. Works great ruclips.net/user/postUgkxjpBI8OOeUXib_iT7UomCrQ-uauwZJ62c on cutting composite siding and plywood sheathing. I probably would not try to use it all day cutting 2X boards, but it's just the right size to throw in a job bag vs. your conventional heavy circular saw. Operating instructions very clear. Came package well. I would definitely recommend you buy this for a friend!
nettoyer les lames avant affutage savon noir
Thanks for watching sir.
그래 이거지
Ну... Да...
Thanks for watching sir.
Бред. Где затыловка зуба. Именно она формирует режущую кромку.
Thanks for watching sir.
OMG. Stop reaching around the blade!
кто бы тебе диск помыл
Thanks for watching sir.
Ton système est nul tu ne prend pas la même valeur d’affutage sur chaque dent ,ce qui vas influencer l’affutage de l’extérieur de la lame ,he oui il faut faire la périphérie maintenant ton système n’est pas a recommander en plus les grains diamant de ta meule vont usiner par frottement les glissières de ta machine!!!!!
Sorry, very dangerous!
Sorry. I'll be careful of using it.
Thanks for watching sir.
полная херня станок китай и все проблемы говорю как заточник
Thanks for watching sir.
как из простого сделать сложное, это сюда!