www.williamsmobileclutch.co.uk 🇬🇧 Contact us for your clutch replacement Thanks for the continued feedback and suggestions. Kind regards. K-A. Williams.
i dont understand upon having fixed my gearbox & fit new clutch & thrust bearing why the manufacturers have so many unnecasary nuts & bolts that are left over having completed the replacement box there are 6 15mm it did not need two 17mm&19mm nuts & bolts & two split pins all totally spare now were not important & make no sense why they were there to begin with. please contact me if any of these may be of any use to you. anyway doing my mates timing belt on tuesday all spare fittings free to collector. thankyou
@comunismofóbico & cristiano i just throw them on the passenger seat untill refitting them on occassion ive had the odd bolt roll out from under the seat, just be aware on gearbox housing there are different length bolts with same size head short fit in deep holes BUT LONG DO NOT FIT IN SHORT HOLES.... i just cut them ones shorter mate! I WOULD SAY use food bags & label them top to bottom/front to back or clockwise/anti clickwise USE A PAINT PEN & DOTS . : .: :: OR - = + OR a,b/1,2,3and photo or draw locations removed from pal.
I love your work ethic and specialising has clearly enabled you get these jobs down to a fine art. I don't how many days you do this every week but you don't get an easy day's work. This work would be too hard for a lot of mechanics. Great job sir, full respect to you.
I nave replace a lot of clutch kits on the road without lift... This job needs a lot of patience... Kevin worth a lot of bravo!!!! Keep going my friend!!!! I see all your videos!! Greetings from a mechanic from Greece
I was struggling like mad to get the box back on balancing it on the Jack. Watched your video and you just threw it on 😂 so I tried and it worked a treat. Thanks
Zajebisty film, zajebisty fachowiec! Dzięki Twoim filmom nauczyłem się mechaniki, wszystkie informacje są idealnie zawarte w każdym filmie, co po kolei jak robić, wszystko ładnie pokazane. Dzięki za pełen profesjonalizm! Awesome movie, awesome professional! Thanks to your videos, I learned the mechanics, all information is perfectly contained in each video, which one by one how to do, all nicely shown. Thanks for full professionalism!
I looked at the old pressure plate and thought got a broken finger 😂 obviously not wow didn't realize there were any like that. Keep up the good content buddy & stay safe!!
I don’t know what to say fantastic I have been watching you every single minute for one hour not even 1 second missed I ll try my vehicle tomorrow for the first time good luck to me hopefully not gonna fucktup
Nice job as always, please may l ask if you need to reset any warning lights on dash as some sensors disconnected ref gearbox and starter etc WoW so was this the first DMC change on this Audi 146,673 miles
Great job on showing the odometer at the end because I was curious how many miles that clutch assembly lasted 😀 especially considering it has a dual mass flywheel, and those can be problematic.
@@joeyallcock1011 Having shoulder bolts left over at the end of a job, (ones you throw away over your shoulder), reduces weight on the car making it more economical and environmentally friendly
I was just curious. Being a mechanic myself for the past few decades, I'm always having to buy more tools to keep up w ever changing cars. Since you're in a specialty, are you in the same predicament, always having to buy tools? Great video, Andi must say you're a big man for all the weather conditions I've seen you working through in your videos. Stay safe out there and be careful!
alors là on voit vraiment tout ça va éviter au client de ce lancer dans un chantier comme ça sans connaitre les tenants et les aboutissants. bravo pour vos vidéos.
How do you put that rubber gasket for drifeshafts connecting to gearbox ? Im trying all day today but its falling out all the time, if I mannage to allign one hole then another hole is gone already.
Hi, Kevin just curious as to what you estimate the weight to be of the clutch bellhousing assembly. I would guess it must be in the region of 40-45 kilograms on a VW/AUDI 1.6 tdi. Very impressive the way you manhandle it into position whilst under the car, you must have a full six pack of stomach mussels.😂
Kev iv messaged u b4 iv been in the trade 29 years has mr clutch ever tyred to contact u?just thinking I'm sure thay would want u on there team but I think I are better where u are
Apreciando a una mujer tan hermosa. 2:10 sentadillas son unos LIKESEX.Uno muchas y un buen ejercicio. 5:25 Se deja ver que hay muy buenos resultados 😍👍 Saludos desde la Cd.. de world loss mortales abian apreciado tan hermosa mujer
www.williamsmobileclutch.co.uk 🇬🇧
Contact us for your clutch replacement
Thanks for the continued feedback and suggestions.
Kind regards.
K-A. Williams.
i dont understand upon having fixed my gearbox & fit new clutch & thrust bearing why the manufacturers have so many unnecasary nuts & bolts that are left over having completed the replacement box there are 6 15mm it did not need two 17mm&19mm nuts & bolts & two split pins all totally spare now were not important & make no sense why they were there to begin with. please contact me if any of these may be of any use to you. anyway doing my mates timing belt on tuesday all spare fittings free to collector. thankyou
@comunismofóbico & cristiano i just throw them on the passenger seat untill refitting them on occassion ive had the odd bolt roll out from under the seat, just be aware on gearbox housing there are different length bolts with same size head short fit in deep holes BUT LONG DO NOT FIT IN SHORT HOLES.... i just cut them ones shorter mate!
I WOULD SAY use food bags & label them top to bottom/front to back or clockwise/anti clickwise USE A PAINT PEN & DOTS . : .: :: OR - = + OR a,b/1,2,3and photo or draw locations removed from pal.
oke
I love your work ethic and specialising has clearly enabled you get these jobs down to a fine art. I don't how many days you do this every week but you don't get an easy day's work. This work would be too hard for a lot of mechanics. Great job sir, full respect to you.
I nave replace a lot of clutch kits on the road without lift... This job needs a lot of patience... Kevin worth a lot of bravo!!!! Keep going my friend!!!! I see all your videos!! Greetings from a mechanic from Greece
I was struggling like mad to get the box back on balancing it on the Jack. Watched your video and you just threw it on 😂 so I tried and it worked a treat. Thanks
Zajebisty film, zajebisty fachowiec! Dzięki Twoim filmom nauczyłem się mechaniki, wszystkie informacje są idealnie zawarte w każdym filmie, co po kolei jak robić, wszystko ładnie pokazane. Dzięki za pełen profesjonalizm!
Awesome movie, awesome professional! Thanks to your videos, I learned the mechanics, all information is perfectly contained in each video, which one by one how to do, all nicely shown. Thanks for full professionalism!
.
Quite a lot involved in a clutch change on that, great video. Well done
I looked at the old pressure plate and thought got a broken finger 😂 obviously not wow didn't realize there were any like that. Keep up the good content buddy & stay safe!!
bonjour vous avez fait vraiment une super vidéo du début à la fin ne changer rien bravo
Merci beaucoup
Super work, amazing filming and editing. Thanks
I don’t know what to say fantastic I have been watching you every single minute for one hour not even 1 second missed I ll try my vehicle tomorrow for the first time good luck to me hopefully not gonna fucktup
Can't stop watch it! Bravo!
Great job!!! You always do. Wouldn't it be necessary to bleed the clutch master cylinder? Thanks
Thank you for making these detailed videos. 🙏
fanasic video! Hard work pys off :P wich protection mat do you use? Greetings from Germany
Nice job as always, please may l ask if you need to reset any warning lights on dash as some sensors disconnected ref gearbox and starter etc
WoW so was this the first DMC change on this Audi 146,673 miles
Hej Kevin i just want to say thanks to you, you motivate me every day :)
Loving the videos - great step-by-step process and informative.
How much would/should it be approx for a 57reg 1.9 Audi A3?
www.williamsmobileclutch.co.uk
Great job on showing the odometer at the end because I was curious how many miles that clutch assembly lasted 😀 especially considering it has a dual mass flywheel, and those can be problematic.
obviously a novice mechanic he reinstalled all nuts & bolts & didnt leave the spare ones for anybody who may need a nut n bolt or two
@@joeyallcock1011
Having shoulder bolts left over at the end of a job, (ones you throw away over your shoulder), reduces weight on the car making it more economical and environmentally friendly
@@saeedhaq2107 my thoughts exactly & they may come in handy elsewhere/or even save steel industry some resources
Fantastic video thanks for sharing Kevin 🔧💥👍🇮🇪
Can I know what camera you are using? The quality is so good for close ups that gopro cannot do.
Great workings there
Volkswagen Audi gearboxes are heavy happy sunday my friend 🍺
Thank you master ,
How much do you charge for a clutch replacement for an Audi a3 1.9tdi?
I was just curious. Being a mechanic myself for the past few decades, I'm always having to buy more tools to keep up w ever changing cars. Since you're in a specialty, are you in the same predicament, always having to buy tools?
Great video, Andi must say you're a big man for all the weather conditions I've seen you working through in your videos. Stay safe out there and be careful!
alors là on voit vraiment tout ça va éviter au client de ce lancer dans un chantier comme ça sans connaitre les tenants et les aboutissants. bravo pour vos vidéos.
Awesome work👏👍
How do you put that rubber gasket for drifeshafts connecting to gearbox ? Im trying all day today but its falling out all the time, if I mannage to allign one hole then another hole is gone already.
master William master mechanics and PhD in clutch and box if you like your specialty William
is it the same DMF on the 2010 golf 1.6tdi
How much would you charge for a new clutch in a 06 plate focus petrol in Southampton mate
great content
Great videos any chance of knowing what gloves you use?
Perfeck Man) Respect)hello with Ukraine Lviv)
Have you got a video doing a clutch replacement on a vag\audi 1.8T 20valve turbo to watch? Actually this looks very similar! Thanks!
There’s several of them on the channel
What is that cleaner you use several times?
And that pink grease?
It’s brake cleaner and rubber grease.
@@WMCS why do you remove both the drive shafts? Is it necessary to replace the clutch? Thanx a lot
Kevin un 👋 da italy palermo 💋
Hi, Kevin just curious as to what you estimate the weight to be of the clutch bellhousing assembly.
I would guess it must be in the region of 40-45 kilograms on a VW/AUDI 1.6 tdi.
Very impressive the way you manhandle it into position whilst under the car, you must have a full six pack of stomach mussels.😂
This particular one roughly about 50KG I’d say.
you could make a video replace the clutch Audi A4 B8????
That some beefy mileage for DMF. Family mk3 Mondeo is on 3rd clutch at same mileage.
100% pro jobb :)
Wonderfull
Kev iv messaged u b4 iv been in the trade 29 years has mr clutch ever tyred to contact u?just thinking I'm sure thay would want u on there team but I think I are better where u are
nice job
salut je comprend pas pourquoi vous enlever a chaque fois la tulipe de la boite est necessaire ?? a part si il a un joint a changer
👏👏👏👏👏👏
👍👍👍👍👍
👌🍻
👍👍👍👍👍👏👏 super
God this man is like god 4 clutches in one day plus hours driving wow
always manual clutch I want DSG automatic 🤔🙃
oke
Apreciando a una mujer tan hermosa. 2:10 sentadillas son unos LIKESEX.Uno muchas y un buen ejercicio. 5:25 Se deja ver que hay muy buenos resultados 😍👍 Saludos desde la Cd.. de world loss mortales abian apreciado tan hermosa mujer
Front wheel drive cars should be illegal…😂
German cars. Overengineered
Watched & Enjoyed. Almost inspires me to try doing my Golf mk5... But I think I'd rather book you to do it for me. Subscribed & Bookmarked
oke