How To Replace the Clutch on a Yamaha Warrior 350
HTML-код
- Опубликовано: 7 июл 2024
- No matter what kind of riding you do, clutches are one of the most abused and important components on any ATV. In this video we'll go over the proper procedures to inspect and/or replace the clutch on this 1996 Yamaha Warrior 350. The steps shown should carry over to all Warriors of any year, but be sure to check your OEM service manual if you are unsure.
Shop Now | How To Replace the Clutch on a Yamaha Warrior 350
www.rockymountainatvmc.com/Sa...
Click Here To Subscribe To Our Channel!
/ @rmatvmc
Follow Us On Social Media!
FACEBOOK: rmatvmc?utm_...
INSTAGRAM: rmatvmc?ut...
TWITTER: RMatvmc?... 
Хобби
![[ GUILTY GEAR STRIVE: DUAL RULERS ] Teaser Trailer](http://i.ytimg.com/vi/e4TDqaE3XAg/mqdefault.jpg)
Thanks for this useful video. Respect from Belarus 🇧🇾
Love the vids on the old school sport quads,keep it up guys!
Very helpful. Thanks
I replaced my clutch but there are no clutch cushion spring in there ... Seem too loose without the cushion springs .... Advised please.?
Thank you for this video helped me with my in depth good quality thanks 🙂🙂
Lmao he said if you don't have a buddy call your mom lmao. I'm guessing dad left for a pack of smokes 🚬 🤣🤣😅😅
Lol I came here to call out that same line, it was so deadpan I was like, what? Love these guys, learned about the site last year and this is their first video I've noticed I've seen since then.
Thank you Needed this
Whats the brand or recommend clutch holder for this clutch model? The online store doesnt carry the same one in the video??? Please help.
Love your videos I enjoy watching all of your videos 😍
What could I use to prop the 2 wheels up since I don't have the stands like you
hello, you could make a video by lowering the engine and changing the piston rings. please
thank you for sharing I"ll replace my quad clutch by my self..
How did it go? I’m having an issue with the clutch engaging now
i have an unbranded clutch kit. the fiber plates have no notches. there is the one fiber plate that is wider. and two of the rings are a little thicker than the other new ones...no instructions...what do i do?
thanks
And I have replaced my cable .tusk clutch kit . And I added one extra steel plate
i installed a ebc clutch kit and i put the disc that has no cut as first closed to the engine cause no instruction and manuel says stock clutch has the disc with the cut as last on the outside so yeah.... clutch works fine, but hard without instructions if they kit aint he same as stock :(
I put in the 8/7 banshee driveline setup and now clutch will not engage. What I do wrong? 03 warrior
In another video they put the friction plate with no notch (the thicker one ) in the basket last which would be against the inner pressure plate and you put yours in first which way is the correct way ??? HELPP
Our video is correct. I checked the service manual and it's not super clear in there, but the parts diagram shows the "thicker one" being put on the clutch hub/boss first just like we did.
-Charles
What is the plastic gear in there called ?
Jakie są wymiary cienkiej uszczelki
i have a question concerning the lever on the cover . i just got this 2000 warrior that's not running and i thought it had a bad clutch cable. i disconnected the cable from the housing cover and the lever would move only a 1/2 to 3/4 " and stop solid , this is free play with no resistance. After removing the cover it appears the clutch basket was installed properly but the ( i'll call it a plunger ) that pushs against the push rod on to the pressure plate is barely touching the push rod.
Is the clutch not disengaging? What is the symptom? With the cable off, that lever will have some play before it touches the push-rod. Does yours look different than the video with everything hooked up?
What do u think chirping could be
I did my clutch but seems to be not grabbing .it moves but not even 25%
Does the spring plate bolts screw all the way in? Or do they have a bit of gap so the spring can have movement?
@SoundestB2D2 thanks bro
Cool
just bought a 2000 warrior. when you pull the clutch it doesnt go back. you have to push it back. is that a clutch cable issue or do i need to replace the clutch. or both?
Definitely sounds like a cable issue
What size is the bolt that holds the clutch basket in?
Keith Thompson 27mm
Ltz400 next
Same thing would apply to a 2006 Yamaha raptor 350?
Yes
my clutch basket is stuck and wont come out. i already took the nut and little washer off
So I ordered everything you used in this video and assembled it as such. I have significant clutch slip from 3-6 gears but when it warms up completely it slips every gear. I did everything by the book and it's not an adjustment issue. Used wet clutch compatible oil also. I'm close to setting it on fire for my own satisfaction, any tips or something would be appreciated
Did you fix it or burn it?
Can you put oil back in or does it have to be wet clutch oil
If you put standard oil in a crankcase that has a wet clutch, you won't have a working clutch anymore. You need oil designed for wet clutch applications as it allows the frictions plates to maintain enough friction to function correctly while still sufficiently lubricating the moving parts in the rest of the engine. It's not really any more expensive, I think even Super Tech makes some. If the issue is it being hard to find, that's a bummer but there is no substitute that I know of.
People need to know that the armature on the case needs to be lined up properly as well that you did not show
And in the 700r 2007
I need help!!!!!!... I did everything what the video showed but my clutch is not engaging what so ever....... Please help!!!!
Call a local shop.
What kind of oil is that?
There is Yamalube 10w-40 in this quad.
Here's a page showing everything you need for an oil change on a Warrior 350: www.rockymountainatvmc.com/Sales/2640/How-To-Change-The-Oil-On-A-Yamaha-Warrior
Hope that helps!
What tool is that to hold clutch
Tusk clutch holding tool: www.rockymountainatvmc.com/parts/tusk-clutch-holding-tool-p
Where can i get the clutch wrech
You can click the first link in the description to check out all the parts and tools used in this video. You can also click the link below to view the Tusk Clutch Holding Tool:
www.rockymountainatvmc.com/parts/tusk-clutch-holding-tool-p
Which clutch tool are you using in this video?
Just buy an adjustable pin wrench, they’re only about $15 for a cheap one.
Do a how to clean on a newer Yamaha blaster
Cole Swangin Water, soap, and some scrubbing is all it takes👍🏽
You Literally don’t even mention what size socket to remove the clutch.
Mine broke and I need a new one
I need help
Sorry about that
What’s the size of the socket 😂
If I dont have a clutch buddy why do I have to call my mom?
She will help
That keychain is gone scratch up the plastics while riding. Trust me😂
Sounds like you have some experience 😎
It has a base-plate of prefabulated aluminite 🤓