Why the white printhead clogs and how to stop it before its to late
HTML-код
- Опубликовано: 2 ноя 2023
- Hey guys I know why the white printhead clogs all the time check out my tips to keep it running like new for as long as possible.
Link to the printer I use
uvprinterparts.com/products/6...
link to the ink I use
uvprinterparts.com/products/u...
link to the caps I use
uvprinterparts.com/products/e...
you are not alone
We have created a Facebook group to help repair and diagnose your printer take a look at it here.
/ 674599697555960
Also UV Printer parts is looking for good affiliates if you think you can share and promote printer parts or ink apply here it is free to apply and join and you will earn money
af.uppromote.com/73e687/register
check out my sign shop.
www.footstepsinthepast.com - Хобби
Such great tips
Good job
great videos, thank you.
what is the best way to put the printer to bed for the night or over the weekend? Should we power it off and fully dock the inc heads with cleaner in the ink pads?
I suggest always leaving the printer on
What do you do with your old ink pads? Do you clean them and repurpose them too or just use new every time it needs replaced?
Inkpads are not extremely expensive when I noticed they go bad I just replace them and dispose of the old you can find them here jaysprinterparts.com/products/epson-xp600-cap-capping-station-inkpad
@@JaysToDoList the shop I work at has a haolic uv dtf printer. You have ink pads for those?
@@chrisoneil9798 If it is the XP 600 then yes.
Any advice for me, my white ink is printing but not printing the whole backing, it's like it's not aligned and only printing 80% of the image of the white, then i end up with a transparent border on the image!
Sure email us and send a photo of what your printing ill see what we can do jaysprinterparts.com
Hi bro, can i use xp600 for 8' x 4' flatbed machine.
You can, but i would recommend switching to ricoh at least g5 but if you need more affordable ricoh gh2220. That is if it is uv printer. As xp600 is not the best suited for this
@@JaysToDoList Thanks bro. What's your opinion about EPSON i3200 . i'm doing only glass printing.
@@JaysToDoList I searched in INDIA, gh2220 is very rare model.
If must use epson I suggest i1600-u this is designed for uv ink if you use i3200 just stick with xp600 as it is cheaper
@@JaysToDoList Thanks again for your response. In XP600 , May i use CMYK + WW in a single head . or CMYK in one head, and WWWW on another head. which one is recommended by you. Thanks bro.
and i south my machine was dirty
Haha 5 years old printing full time gonna make a mess