how to bring printhead back to life inkjet flush white ink Epson xp600
HTML-код
- Опубликовано: 13 авг 2023
- how to bring your printhead back to life with this simple trick
extend the life of your printhead
link to the printer I use
uvprinterparts.com/products/6...
link to quality ink we use at
uvprinterparts.com/products/u...
link to the printheads I use xp600
uvprinterparts.com/products/u...
link to ribbon cable to hook up printheads
uvprinterparts.com/products/2...
link to denatured alcohol you can get these for maybe half the price at your local hardware store.
amzn.to/3OCRo0H
Also Jays Printer parts is looking for good affiliates if you think you can share and promote printer parts or ink apply here it is free to apply and join
af.uppromote.com/73e687/register
these are all the products that I use personally at my sign shop here
footstepsinthepast.com
you are not alone
We have created a Facebook group to help repair and diagnose your printer take a look at it here.
/ 674599697555960 
Хобби
![Roddy Ricch - Survivors Remorse [Official Music Video]](http://i.ytimg.com/vi/J5IeFzr2GgE/mqdefault.jpg)
just found you today, thank you for all of the useful info!
No problem let me know if you need anything
This is super helpful for anyone with these printers!😊
Very good instructions thanks for all your videos.
Glad I can help with your printer 🖨
I have replaced the print head after it stopped printing colour, but no colour comes out of the new print head either, the pump is running but nothing comes out. What could be the problem? Cables are also new
hello i have error code 13 in my printer solvent xp600 can u help me???
Hi. Thanks for this. This is the same process for dtf dual head printers right?
Yes but Change acohol to warm distilled water
great videos. we've installed a new print head and want to keep our old one as a backup. Can you give a recommendation on how to store a backup print head. We're using TX800 print heads.
sure clean them with head cleaner then use a moisturize and push it though the head just like the cleaner then keep it stored away from light and sealed in a bag
@@JaysToDoList does it matter what moisturizer we use?
Pls after installing the new head, i dont know why the ink is entering the cable and it has affected one of the holse in the head. How to stop the ink entering the cable while printing. Thanks
Make sure you don't have a hole in your ink tube that could be making the ink siphoned. Causing exsesive ink ink your system. This would be noticeable if you turn off the printer and move your head over the platform let it sit there for 15 minutes does it drip any ink? It shouldnt
Can denatured alcohol be used to clean the printhead with ecosolvent inks?
It can for stubborn clogs but acohol shoukd be last resort as it is hard on the head
@@JaysToDoList Thanks for the quick response. My XP600 head is up for replacement anyway so maybe I can try to revive it by using denatured alcohol as a cleaner.
@mineung yes hopefully it works great for you if not jaysprinterparts.com will have replacements for you
10:38 😂 man that so true
Sir, water touch my Epson l3150 headprint when I installed it on printer then the printer is not switching on, I change the MOSFET is now switching on but not printing. Please Sir I need your help, what should I have to do now?
If youre not printing anything at all, but it goes through the motions like it is, you might have a blown fuse on the mainboard.
@@irajackson2877 but the headprint cover is not moving
@@isaisa6558 I agree if you got it wet when there was power it might of shorted out your mainboard check your fuses on the motherboard or replace it is my guess
I have problem after I put new head in Uv printer like you show my Mother board is died what is reason ?
Where did you get your new head? It's possible something shorted now while you are changing the head. Or Maybe they cable put in backwards or something or the new head to potentially have a short in it which would blow out your preheadboard
But what makes you say the board died what is it doing?
@@JaysToDoList thank you for you time, so I buy new head xp600 but 2hand from china so I just put on printer start to print and after that board is burn after I give for my friend he fix for me, so next time is happened again about 3 times already, maybe this is china head not good I don't know and how cane protect
@Andycr0zy I recommend buying new head you will have problem with used head we have very good quality heads forsale in the usa if you need one jaysprinterparts.com
you video is sympatic but you can't say to everybody to put alcohol in printhead, I have work in development of ink and cleaning solution and they need to now the reality.
for unclog printhead this is the mix for good cleaning and lubrification of canal for not have white ink clog tomorrow : Diéthylène Glycol (15 %)
2-Pyrolidone (7 %)
Éthylène Glycol (5 %)
Polyéther (3 %)
water: 70%
I give it because it's not expensive to make it and people say use alcohol but not never of a little quantity like 0,5% ammonia the same is not good for canal, tube.
its chemical study for find the good liquid to clean different things.
Thanks for the info
hi
Hello
I want to learn printhead repair from you, will you teach me?@@JaysToDoList
making a video of a clogged head then recommends a ink that clogged his printer head. Make it make sense.
Ha ha maybe not my best move keeping it real. But it is good ink 😄